Clearaudio Master Innovation Black Bedienungsanleitung

User manual

electronic GmbH, 2018/05 Made in Germany

Upgrade Innovation to

Master Innovation

Master Innovation Black

Picture with:

Clearaudio tonearm „Universal“

and clearaudio cartridge

„Goldnger Statement“.

Master Innovation Wood

Picutre with:

Clearaudio tonearm „TT1 MI“

and Clearaudio cartridge

„Goldnge Statement“.

User manual

2 © clearaudio electronic GmbH, 2018/05

Dear Clearaudio customer,

Congratulations to your choice to upgrade your

Innovation

to a

Master Innovation

turntable, a world

class turntable, handmade in Germany by Clearaudio electronic GmbH.

Like the model

Innovation

the

Master Innovation

has a resonance minimizing chassis construction in

a sandwich combination with the innovative motor unit (low noise level and high turning moments),

which guarantees total isolation of resonances from the turntable chassis, providing the best music

reproduction and authentic High End imaging.

The Clearaudio patented CMB-Bearing-Technology, an inverted bearing with jewelled and polished

ceramic bearing shaft and a bronzed liner, provides frictionless analogue enjoyment.

This user manual described the reconstruction from the turntable

Innovation

to the turntable

Master Innovation

For more information regarding the

Master Innovation

you will get a separate user manual.

We wish you a lot of musical enjoyments with your new Clearaudio

Master Innovation

turntable.

Clearaudio electronic GmbH

This section must be read before any connection is made to the mains supply.

WARNING

Do not expose your turntable to rain or humidity.

Do not handle mains leads with wet hands.

No naked ame sources, such as lighted candles, should be placed on the equipment.

CE-MARKING

EQUIPMENT MAINS POWER SETTING

Your Clearaudio product has been prepared to comply with the household power and safety requirements

that exist in your area. This product can be connected to 230 V or 110 V AC (50 Hz and 60 Hz).

Recording and reproduction of any audio material may require the consent of the creator.

Please note relevant information given in the following:

- Copyright Act 1956

- Dramatic and Musical Performers Act 1958

- Performers Protection Acts 1963 and 1972

- Any relevant recent legal regulations.

The Clearaudio

Master Innovation

meets the regulations concerning electromagnetic

disturbance (EMC) and low-voltage appliances.

User manual

Made in Germany 3

Contents

1. Packing overview ................................................................... 4

2. List of components ................................................................. 5

3. Reconstruction Innovation to Master Innovation .................. 6 - 16

4. Fine adjustment of the motor ................................................. 16

5. Special notes ........................................................................... 17

6. Technical data ......................................................................... 18

Warranty – information .............................................................. 19

User manual

4 © clearaudio electronic GmbH, 2018/05

1. Packing overview

Pic. 1: Packing overview

Box 1 of 2:

Drive unit,

already pre-mounted at

factory, accessories

Box 2 of 2:

Stainless steel platter,

drive platter

(38 mm)

User manual

Made in Germany 5

2. List of components

Clearaudio’s special secure packaging for your

Master Innovation

turntable ensures safe

transportation. Please keep this original packaging, in case you need to transport or ship the

turntable at any point in the future.

Clearaudio

Master Innovation

components list:

Pic. 2: List of components

1. First drive unit, pre-mounted

(Box 1 of 2) 4. Drive bearing

2. Stainless steel sub-platter

(Box 2 of 2) 5. Accessoires:

Pulley, white gloves, 2x drive belts, hex

wrench (#8), bearing oil, user manual,

QCQ-Card, warranty card

3. Platter with magnets (28mm)

(Box 2 of 2)

User manual

6 © clearaudio electronic GmbH, 2018/05

3. Reconstruction Innovation to Master Innovation

The reconstruction of the turntable

Innovation

Master Innovation

is easy as most parts of the

turntable chassis are already pre-assembled and has been tested at the factory.

Please use the enclosed white gloves in order to avoid scratches or unwanted ngerprints on the

turntable parts or platters.

After the reconstruction the

Master Innovation

turntable requires a space for setup of at least

(in inch): 18.9 x 19.3.

18.90 inches

480 mm

19.29 inches / 490 mm

Pic. 3: Required setup space (with Clearaudio tonearm

Unify

)

User manual

Made in Germany 7

Before you can start to reconstruct the

Innovation

turntable to the

Master Innovation

please pay

attention that all bases of the

Innovation

turntable have the height of 40 mm!

If one of your bases has not the height of 40 mm, please contact the dealer, where you have

purchased your

Innovation

turntable.

1.)

Take o the tonearm base and the blind screw on the other base at your

Innovation

turntable

(as shown in Pic. 4).

Pic. 4:

Innovation

turntable backside

2.)

In the next step take o carefully the drive platter of your

Innovation

. Please keep all platters with

you, as you need the platters again for the upgrade to the

Master Innovation

Pic. 5: Taking o the drive platter

User manual

8 © clearaudio electronic GmbH, 2018/05

3.)

Now remove carefully the stainless steel platter with the mounting clip

(accessory of

Innovation

turntable).

Avoid major side forces to avoid any damages to the ceramic bearing!

4.)

Next please remove the bearing of your

Innovation

. For that unscrew carefully the screw on the

lower side of the turntable and pull the bearing out of the chassis.

Pic. 6: Taking o the stainless steel platter

Screw on the lower side

Pic. 7: Removing the bearing

User manual

Made in Germany 9

5.)

Take out the delivered drive bearing for the

Master Innovation

Please remove carefully any protective security tape from the bearing.

Now you can put the new bearing into the chassis (see pic. 6) and arm the bearing with the

delivered screw on the lower side of the turntable.

Pic. 8: Setup of the drive bearing

6.)

Now please exchange the pulley of the

Innovation

turntable with the delivered pulley.

Pulley

Innovation

Pic. 9: Exchange of the pulleys

User manual

10 © clearaudio electronic GmbH, 2018/05

Please pay attention that the exchanged

Master Innovation

pulley is ush mounted with the axis of

the motor.

Pic. 10: Setup of the

Master Innovation

pulley

Now the upgrade from the

Innovation

to the

Master Innovation

is completed and you can switch

over to the setup of the

Master Innovation

In the user manual for the

Master Innovation

you will nd the packing list, packing overview and of

course the whole description for the setup of the

Master Innovation

To make it easier for you, you can also go ahead with the following description:

7.)

In the next step remove carefully the lamination of the sensor on the upper surface of the turntable

chassis.

Please remove the lamination extreme carefully and avoid any soiling and scratches.

Take the stainless steel sub-platter again carefully with both hands and put it onto the bearing.

The lower side must show to the bearing. Through a lightly (!!) up and down movement the platter

will slip onto the bearing upper part

(Pic. 11 and 12).

Please remove the lamination extreme carefully and avoid any soiling and scratches.

Pulley for

Master Innovation

Distance is approx. 1,2 mm

Pic. 11: Setup of the sub platter Pic. 12: Setupf of the sub platter

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Clearaudio Drehscheibe Handbücher

Clearaudio

Clearaudio Champion Handbuch

Clearaudio

Clearaudio Unify Series Bedienungsanleitung

Clearaudio

Clearaudio Emotion SE Bedienungsanleitung

Clearaudio

Clearaudio Concept Bedienungsanleitung

Clearaudio

Clearaudio Concept Bedienungsanleitung

Clearaudio

Clearaudio Ambient Bedienungsanleitung

Clearaudio

Clearaudio Avantgarde Magnum Bedienungsanleitung

Clearaudio

Clearaudio Magnify Bedienungsanleitung

Clearaudio

Clearaudio Emotion SE Bedienungsanleitung

Clearaudio

Clearaudio TT2 Bedienungsanleitung

Clearaudio

Clearaudio Avantgarde Bedienungsanleitung

Clearaudio

Clearaudio AC039 Bedienungsanleitung

Clearaudio

Clearaudio Charisma V2.1 MM Bedienungsanleitung

Clearaudio

Clearaudio Ovation Bedienungsanleitung

Clearaudio

Clearaudio Concept MC Bedienungsanleitung

Clearaudio

Clearaudio concept V2 Bedienungsanleitung

Clearaudio

Clearaudio Double Matrix Professional Bedienungsanleitung

Clearaudio

Clearaudio Statement Bedienungsanleitung

Clearaudio

Clearaudio Master Innovation Bedienungsanleitung

Clearaudio

Clearaudio Pulley extractor device Bedienungsanleitung

Clearaudio

Clearaudio Swing base Bedienungsanleitung

Clearaudio

Clearaudio Stroboscope Testrecord Bedienungsanleitung

Clearaudio

Clearaudio Verify Bedienungsanleitung

Clearaudio

Clearaudio Champion Bedienungsanleitung

Beliebte Drehscheibe Handbücher anderer Marken

Gemini

Gemini CDT-05 MKII Bedienungsanleitung

Rotel

Rotel RP-820 Bedienungsanleitung

Shuman

Shuman MC-250BT Bedienungsanleitung

Stanton

Stanton STR8-150 Bedienungsanleitung

Audio Technica

Audio Technica AT-LPW40WN Bedienungsanleitung

Crosley

Crosley McQueen CR7011-GY Bedienungsanleitung

auna

auna TT-Classic Plus Bedienungsanleitung

COMO AUDIO

COMO AUDIO Turntable Analog Bedienungsanleitung

Dual

Dual 1009 F Bedienungsanleitung

REED

REED Muse3C Bedienungsanleitung

AXIOMTEK

AXIOMTEK OPS883-H Series Bedienungsanleitung

Pioneer

Pioneer PL-71 Bedienungsanleitung

Vestax

Vestax PDX-a1 Bedienungsanleitung

Denon

Denon DP-400 Bedienungsanleitung

Dual

Dual 504 Bedienungsanleitung

Audio-Techica

Audio-Techica AT-LP60XBT Bedienungsanleitung

Goldring

Goldring G99 Bedienungsanleitung

Acoustic Signature

Acoustic Signature Typhoon NEO Bedienungsanleitung