Clifford Arrow II Bedienungsanleitung

Owner'sManual

ArrowII

World-ClassAutoSecurity TM

Table of Contents

Standard Features of the Arrow II . . . . . . . . . . . . . . . . . . . . . . . . 2

Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Your 2-button/3-channel remote controls . . . . . . . . . . . . . . . . . . . 5

Optional Anti-CodeGrabbing (ACG) remote controls . . . . . . . . . . . . 6

How to interpret the chirps and parking light flashes . . . . . . . . . . . . . 6

FACT — False Alarm Control and Test . . . . . . . . . . . . . . . . . . . . . 6

Piezo Sensor™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Enhanced AutoArming™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

AutoArming enable/disable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Visual acknowledgment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

AutoArm & Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Instant AutoArming bypass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Valet mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

To enable valet mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

To exit valet mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Optional remote controlled valet mode entry and exit . . . . . . . . . . . . . . . 8

Remote keyless entry in valet mode . . . . . . . . . . . . . . . . . . . . . . . . . 8

How to interpret the LED status indicator . . . . . . . . . . . . . . . . . . . . 8

AutoTesting™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Automatic malfunction bypass . . . . . . . . . . . . . . . . . . . . . . . . . 8

Prior intrusion attempt alert . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

TotalRecall™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Fault-Proof starter interrupt . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

High-output siren . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Chirp Muting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

SmartPowerUp™ II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

User-selectable features . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Programming table for user-selectable features . . . . . . . . . . . . . . 10

EXAMPLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Adding new remote controls . . . . . . . . . . . . . . . . . . . . . . . . . 11

How to erase the codes of lost or stolen remote controls . . . . . . . . . . 11

Standard Features of the Arrow II

✔Lifetime Warranty —For as long as you own the car, Clifford will repair or

replace the control unit and remotes free of charge (see the warranty card for details).

✔FACT™—False Alarm Control and Test — One of many patented Clifford

innovations, FACT absolutely, positively ends recurring false alarms.

✔A Pair of 2-button/3-Channel Remote Controls —Fingertip command from a

typical range of 100 feet.

✔AntiScan™ — Some car thieves use “scanners” that transmit one digital code after

another until they hit the one code that disarms the alarm. AntiScan blocks

scanners to prevent disarming by anyone other than you.

✔Anti-CodeGrabbing™ (ACG) Capability— A code-grabber lets a thief record

off the air the digital code transmitted by your remote control whenever you arm

your car. When you leave, the thief replays the code to disarm the alarm and unlock

your car’s doors. Fortunately,your system’s control unit already has Clifford’s

unbeatable Anti-CodeGrabbing (ACG) technology built into its receiver. Just add

an optional 4-button/12-channel ACG remote control to make code-grabbers

completely useless. With Clifford’s unique ACG, each time you use the remote

control a different random code is transmitted, yet your system will flawlessly

recognize and respond to your transmitter’s new code and ignore all others.

✔Full-Time Remote Panic with Automatic Door Locking/Unlocking— If you

feel threatened, you can, with just a fingertip touch on your remote control,

sound the siren, flash the parking lights and unlock your vehicle’s power door

locks for quick entry into your car without fumbling with your keys. If you press

the panic button while driving, the siren will sound, the lights will flash and the

doors will lock to shield you from the assailant (some vehicles require optional

relays to control the power locks).

✔Dual-Mode Chirp Muting— You can silence the usual arm/disarm chirp

confirmations on the go and without any pre-planning with just a press of both

buttons on the remote control. Or you may choose to silence them on a long-term

basis until you decide to turn them back on.

✔Built-In Parking Light Flasher — Visually confirms door lock and system status.

✔Remote Courtesy Lighting Capability — For your safety and convenience, when

you remotely disarm Arrow II, the interior lights turn on and stay on until you

start the engine or 30 seconds, whichever occurs first (requires an optional relay).

Standard Features of the Arrow II (cont.)

✔Remote Door Lock/Unlock Capability — No more fumbling with keys in the

dark or bad weather! A press of a button on the remote control simultaneously

arms your system and locks your vehicle’s power locks. Another press disarms

and unlocks (some vehicles require optional relays).

✔Enhanced User-Selectable AutoArming™— Automatically arms itself

“passively” if you forget. May qualify you for an insurance discount that could

pay for the system (consult your insurance company).

AutoArming Enable/Disable — You may disable or re-enable AutoArming with

just a few flicks of a switch.

AutoArm & Lock™ — You may set the system to automatically lock the doors

every time the system AutoArms.

Visual Indication — Two parking lights flashes signal that the 30-second

countdown to AutoArming has started.

Instant AutoArm Bypass — Just two quick turns of the ignition switch will

bypass AutoArming for one cycle — perfect when fueling the vehicle.

AutoArming is automatically restored the next time you park your vehicle.

✔Piezo Sensor™— An all-electronic, solid-state vibration/impact sensor that

delivers the utmost reliability and provides more accurate discrimination between

genuine intrusion attempts and non-threatening conditions (like a large truck

passing by) that cause other sensors to false alarm.

✔Advanced CMOS Microcomputer —Very large scale integration (VLSI)

microprocessor commands and monitors all system functions, yet it draws less

power than the vehicle’s clock, so it won’t deplete your car battery like other alarms.

✔AutoTesting™—Tests all triggers and sensors every time you arm and warns you

if you accidentally arm the system with the door, hood or trunk open. If there is a

genuine trigger or sensor malfunction, the system will alert you whether the

problem is a trigger or sensor.

✔Patented Malfunction AutoBypass™ —In the unlikely event of a trigger or

sensor malfunction, your Arrow II will automatically bypass the malfunction and

arm all other points to continue relentless protection of your vehicle.

✔TotalRecall™— Arrow II’s memory stores the identity of the last trigger or

sensor activated. This provides an invaluable diagnostic means, since, whenever

you wish, the system will visually identify the last activated trigger or sensor.

Standard Features of the Arrow II (cont.)

✔Prior Intrusion Attempt Alert — When you disarm your Arrow II, a special chirp

and parking light flash sequence will audibly and visually alert you from a

distance if an intrusion attempt was foiled while you were away.

✔Patented Remote Control Code Learning — A few flicks of a switch lets you

match to the system up to three different Clifford remote controls, including the

optional 3-channel and/or 12-channel Anti-CodeGrabbing remote controls for the

ultimate protection against thieves with code-grabbers. Just as easily, a lost or stolen

remote control can be deleted from the system memory.

✔Fault-Proof Starter Interrupt— Your Arrow II system prevents an intruder from

starting the engine, but lets you start it even in the unlikely event of a system

malfunction.

✔High-Output Siren — Loud siren wail. Arrow II also has Clifford’s Patented

Automatic Noise Abatement feature that limits alarm sounding to no more than 3

minutes even if a door is left open in the wake of an intrusion attempt. This

ensures against battery drain or towing of your vehicle due to noise pollution.

The system then automatically resets and re-arms all other points to provide the

utmost possible protection.

✔Hood/Trunk Trigger Input— For full perimeter protection of the engine

compartment and trunk contents (may require optional pin switches).

✔High-Luminescence LED Status Indicator — Adds visual deterrence and

identifies system status.

✔Valet Mode — Permits vehicle servicing and valet parking without relinquishing

your remote control.

✔Patented SmartPowerUp™ II — When power to the system is disconnected, the

system’s non-volatile memory always remembers the last state (armed, disarmed

or valet mode) and returns to that state when power is restored. So if a thief

disconnects the power and then restores it in an attempt to start the car, the

system will re-arm and instantly sound the siren while immobilizing the vehicle.

Welcome to the world of high-technology

vehicle security and convenience

Congratulations on the purchase of your Arrow II. Clifford Electronics has long

been recognized as the world’s leading manufacturer of high-technology vehicle

security systems. Buying Clifford has always meant buying the best. In fact, Clifford

Electronics holds more patents than all other vehicle security manufacturers combined.

You will find your Arrow II system amazingly easy to use: never more difficult than

a flick of a switch or a press of a button on one of your keychain remote controls.

Your 2-button/3-channel remote controls

The 2-button/3-channel remote controls are miniature radio transmitters each

battery will reduce range). The 2-button/3-channel remote control is the key to your

system. You will use your remote control to arm and disarm the system, lock* and

unlock* the doors, activate the panic feature, command options such as a remote

trunk release, headlight activation, power window operation, or other accessory.

TO ARM

THE SYSTEM . . . . . . . Press button I once. You will hear two chirps and the parking

lights will flash twice. The dashboard LED will flash

repeatedly and the car doors will automatically lock.*

TO DISARM

THE SYSTEM . . . . . . . Press button I again. One chirp and one parking light flash

confirms disarming. In addition, the doors will automatically

unlock* and the interior lights will turn on* and stay on for 30

seconds or until you start the engine, whichever occurs first.

TO SILENTLY

ARM OR DISARM. . . Simultaneously press both buttons I and II to transmit channel

3. The system will arm or disarm with all the indications noted

above except the chirp acknowledgments.

TO REMOTELY

OPEN THE TRUNK OR

TO ACTIVATE A

DIFFERENT OPTION .

Button II can control a remote trunk release or other optional

accessory, such as headlight activation feature of the NightVision

Headlight Automation System, remote power window

operation via the SmartWindows accessory, or operate your

garage door opener via Clifford’s Garage Door Receiver.

TO ACTIVATE

THE PANIC

FEATURE . . . . . . . . . .

Press button I for 3 seconds. The parking lights will flash and

the siren will blare for 30 seconds, or until you press button I

again to turn it off. If the ignition is on (indicating you are in

the car), the doors will lock* to prevent an assailant from

entering. If the ignition is off, the doors will unlock,* allowing

you to enter immediately without fumbling with your keys.

* Some vehicle require optional relays.

Optional Anti-CodeGrabbing™ (ACG™) remote control(s)

ACG is an optional Clifford exclusive that protects you and your automobile from the

most effective and onerous car stealing device ever used by car thieves — a

code-grabber. Code-grabbers literally record, from hundreds of feet away, the code

sent by your car alarm remote control. Then the thief simply plays back the code

when you’re gone, instantly disarming the alarm and unlocking the doors. Your

Arrow II is ACG-compatible. All you need is one or more optional Clifford

4-button/12-channel ACG remote controls. These ACG remote controls use complex

digital signal processing and unbreachable encryption to randomly change the digital

code every time you use the remote control. Your remote will never transmit the

same code twice, and the control unit will never accept the same code twice.

What’s more, the additional channels of the ACG remote control can be used to

command yet another remote vehicle accessory (such as the IntelliStart™ remote

engine/heater/air conditioning starter), can be used to remotely enter and exit valet

mode (see page 8), can be used to command a multi-door electric garage door/entry

gate opener (#60-128/ACG), and can be programmed to operate Clifford systems on

your other vehicles.

How to interpret the chirps and parking light flashes

When you use the remote control, the system responds with chirps and parking light

flashes. These chirp/flash acknowledgments mean:

FACT™— False Alarm Control and Test

With FACT, you’ll never experience repeated false alarms. If the Insignia Siren

goes off, DO NOT remotely disarm the system; allow it to run for the full siren

duration. Before sounding the siren a second time, the system automatically checks

for another activated trigger to verify that an intrusion is in progress. Should the

siren sound again, you will know for sure that someone is tampering with your

vehicle. (To disable FACT, see User-selectable features on page 10.)

Chirps and flashes Meaning

1Your system is disarmed or you have remotely exited valet mode (see page 8)

2Your system is armed or you have remotely engaged valet mode (see page 8)

2 and then 4 Armed but there is a door open or the sensor is malfunctioning

(see AutoTesting on page 8)

3Disarmed but there was an intrusion attempt while you were away

(see Prior intrusion attempt on page 8)

4Armed but the door, hood or trunk is ajar (see AutoTesting on page 8)

Piezo Sensor™

The Piezo Sensor detects intrusion-related vibrations and impacts. For an even

greater level of security, consider an optional Clifford Electronics Glass Tampering

Sensor, detects any attempts to break any of the vehicle windows.

Enhanced AutoArming™

If this feature is enabled and you forget to remotely arm, the system automatically

arms itself 30 seconds after the vehicle doors are closed. For your convenience, if

you re-open any door(s) within the 30-second countdown, AutoArming will restart

from the beginning once all doors are closed. Arrow II has these additional features:

AutoArming enable/disable: If you prefer, you may deactivate or reactivate

the AutoArming feature. See User-selectable features on page 10.

Visual acknowledgment: Five seconds after you exit the vehicle and close all

the doors, the parking lights will flash twice to confirm that the AutoArming

countdown is progressing. Then, 25 seconds later, the system will AutoArm.

AutoArm & Lock: To ensure you can’t accidentally lock your keys inside the

car, the system is factory-set not to lock the doors upon AutoArming. To

change this setting, see User-selectable features on page 10.

Instant AutoArming bypass: Prevents AutoArming when fueling and other

times when you wish to temporarily bypass AutoArming. To activate Instant

AutoArming Bypass, rapidly turn the ignition switch to “ON” then “OFF” twice.

You’ll hear a siren chirp to confirm that the system will not AutoArm. Your

Arrow II will revert to normal operating mode when you next start the engine.

Valet mode

Whenever the system is put in valet mode, all of the system’s security features are

switched off. At various times, you will need to turn the system off. For instance,

when having your car serviced, washed or parked by a valet.

NOTE: If you temporarily lose the use of your remote controls, you can disarm

the system by enabling valet mode.

To enable valet mode

1. Turn the ignition switch to its “ON” position or start the engine.

2. Flip the valet switch. The system’s LED will glow continually for on-going

visual confirmation of valet mode.

To exit valet mode

1. Turn the ignition switch to its “ON” position or start the engine.

2. Flip the valet switch. The system’s LED will turn off to confirm that the system

is in its normal operating mode.

Optional remote controlled valet mode entry and exit

You can even remotely enable or exit valet mode if you have an optional Clifford

4-button/12-channel ACG remote control. All you need to do is transmit channel 5

(one press of the side LevelShift button, then button 1). In addition to the previously

noted indications, two parking light flashes will confirm that you have remotely

enabled valet mode, while a single flash confirms exiting of valet mode.

Keyless entry in valet mode

Even in valet mode, you can still remotely convenience features. Press button 1 as if

you were disarming and the doors will unlock* (indicated by one parking light flash)

and the interior light will turn on*. Press button 1 again and the doors lock* (confirmed

by two flashes). Button 2 can activate an option such as a remote trunk release.

How to interpret the LED status indicator

The LED on your car’s dashboard or console will inform you of the system status:

AutoTesting™

Each time you remotely arm your Arrow II, it automatically tests all system triggers

and sensors. If the hood, trunk or a door is open when you remotely arm, the

system will immediately alert you of the problem by sounding 4 chirps and 4

parking light flashes instead of the usual 2 and 2 (simply disarm, shut the hood,

door or trunk and re-arm to reactivate monitoring of that trigger point). Please note

that the door ajar warning will not work on vehicles with delayed courtesy lights.

NOTE: Since this is a warning indication, you will hear the 4 chirps even if you

“silently” arm with channel 3.

Automatic malfunction bypass

To provide protection even if a component malfunctions, the system automatically

bypasses any faulty point and arms all other triggers and sensors until you can have

the system serviced by your local Authorized Clifford Dealer.

Prior intrusion attempt alert

If you hear three chirps when you remotely disarm, it means that a trigger or sensor

was activated in your absence.

LED Condition Meaning

Off System is disarmed and in normal operating mode (i.e., valet mode is off)

On Valet mode is on, the vehicle can be driven or serviced without the remote control

Flashing System is armed and protecting your vehicle

* Some vehicle require optional relays.

TotalRecall™

The system’s memory records the identity of the last activated or malfunctioning

trigger or sensor, which allows your installer to instantly track down a malfunction. To

identify the trigger or sensor held in the system’s memory, use the following procedure:

1. With the ignition OFF, flip the valet switch.

2. Press button I to “arm” the system, then again to “disarm.”

3. The LED will blink 1–3 times to indicate the most recently activated trigger or

sensor. For your convenience, the blink cycle will repeat a total of 5 times.

4. Write down the number of blinks between pauses and refer to the chart below.

Fault-Proof starter interrupt

Your Arrow II will automatically prevent the engine from being started while the

system is armed. Clifford’s Fault-Proof design ensures that you can start the engine

even in the unlikely event of a system malfunction.

High-output siren with remote controlled chirp muting

Sounds when the system detects an intrusion attempt or when panicked (see page 5).

Chirp Muting

Siren “chirps” confirm arming and disarming, but you have two options: remote chirp

muting and long-term chirp silencing. Remote chirp muting is useful when parking in a

quiet residential area or any other time when you want to arm or disarm silently. To do

so, simultaneously press both buttons I and II on your remote control instead of the

usual button I. The system will arm or disarm with all the usual indications except

the siren chirp(s). Long-term chirp silencing lets you set turn off the chirps until you

decide to turn them back on. Just use the programming procedure noted on page 10.

SmartPowerUp™ II

If power is ever removed, SmartPowerUp II ensures the system will automatically

restore itself to its previous state when power is restored. So if a thief disconnects

power and then restores it in an attempt to start the car, the system will re-arm and

instantly sound the siren. If your vehicle is to be serviced by a mechanic, just put the

system in valet mode (see page 8). If the mechanic needs to interrupt power, your

system will automatically return to its valet mode state when power is restored;

there will be no alarm activation and no need to provide your mechanic with your

remote control and instructions on how to use it.

Number of LED blinks between pauses Trigger/sensor indication

1 blink Piezo Sensor

2 blinks Door trigger

3 blinks Hood or trunk trigger

Andere Handbücher für Arrow II

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Clifford Autoalarmanlage Handbücher

Clifford

Clifford intellivoice IQ Vechicle Security Bedienungsanleitung

Clifford

Clifford 30 Bedienungsanleitung

Clifford

Clifford 5906V Bedienungsanleitung

Clifford

Clifford 5906X Bedienungsanleitung

Clifford

Clifford Cyber 4 Bedienungsanleitung

Clifford

Clifford 520.4X Bedienungsanleitung

Clifford

Clifford Ultramax XL-4500 Bedienungsanleitung

Clifford

Clifford 300 Bedienungsanleitung

Clifford

Clifford 4806X Bedienungsanleitung

Clifford

Clifford XL2000 Bedienungsanleitung

Clifford

Clifford Matrix 10.2X Bedienungsanleitung

Clifford

Clifford Eagle II Bedienungsanleitung

Clifford

Clifford 590.4X Bedienungsanleitung

Clifford

Clifford Matrix RS1.1 Bedienungsanleitung

Clifford

Clifford Concept 450 Bedienungsanleitung

Clifford

Clifford cyber Arrow 3 Bedienungsanleitung

Clifford

Clifford 562C Bedienungsanleitung

Clifford

Clifford 10.5X Bedienungsanleitung

Clifford

Clifford ACE 2000 Bedienungsanleitung

Clifford

Clifford IntelliGuard 9000 Bedienungsanleitung

Clifford

Clifford Tazor 4 Bedienungsanleitung

Clifford

Clifford ACE 4000 Bedienungsanleitung

Clifford

Clifford Cyber 1 Bedienungsanleitung

Clifford

Clifford Wireless Immobilizer XL 500 Bedienungsanleitung

Beliebte Autoalarmanlage Handbücher anderer Marken

Ultra Start

Ultra Start 2500M SERIES Bedienungsanleitung

Ultra Start

Ultra Start 650 Series Bedienungsanleitung

Audiovox

Audiovox Prestige Platinum+ APS-511C Bedienungsanleitung

Sparkrite

Sparkrite SRA8 Bedienungsanleitung

Viper

Viper 4708V Bedienungsanleitung

Federal Signal Corporation

Federal Signal Corporation Pathfinder Siren Series Handbuch

Falcon

Falcon Predator XL3 Benutzerhandbuch

Audiovox

Audiovox Auto Security XR91 Betriebsanleitung

CrimeStopper

CrimeStopper CS-8717 Kurzanleitung

Scytek electronic

Scytek electronic Vectra X3 Bedienungsanleitung

Gemini

Gemini 7057 Bedienungsanleitung

FlashLogic

FlashLogic FLRSBA PRESTIGE Bedienungsanleitung

Magicar

Magicar FAI-440 Bedienungsanleitung

Viper

Viper 560XV Bedienungsanleitung

SECO-LARM

SECO-LARM 300C Bedienungsanleitung

Python

Python 660XP Bedienungsanleitung

Megalarm

Megalarm MEGA 3600 Bedienungsanleitung

CrimeStopper

CrimeStopper CS-2011RS Series III Super Rage Bedienungsanleitung