Cobra 602-1103B Bedienungsanleitung

®23801 E. La Palma Ave., Yorba Linda, Ca 92887 Ph. 714.692.8180 Fax. 714.692.5016

www.cobrausa-hd.com

04/17 ®

*Cobra®recommends you always wear a helmet while riding. Please never operate your motorcycle while under

the influence of alcohol and/or drugs. Enjoy the new look of your motorcycle and please ride safely.

Items Supplied >

1 - Sissy Bar w/ Pad

2 - Mount Brackets (Left/Right)

2 - 5/16”-18 x 1-1/2” Buttonhead Bolts

2 - 5/16”-18 x 1-3/4” Buttonhead Bolts

4 - M8 x 16mm Buttonhead Bolts

Application(s) >

HARLEY SPORTSTER 2004 - 2017

Instruction Manual >

Read all instructions carefully before installing your new Cobra®product!

1. If the motorcycle is equipped with rear reflectors on the fender rail cover than they must be removed

along with any remaining adhesive left on the motorcycle. Save the reflectors for reuse.

2. Remove the bolts, washers, locknuts and clipnut from the right side fender rail. Save the locknuts and

clipnut for reuse.

3. Remove the chrome fender rail cover with the turn signal attached (for wire slack, you may need to

disconnect the turn signal wires from the retaining clip under the fender).

4. Install right sissy bar mounting bracket between the fender rail and fender (part # facing inward).

NOTE: Be careful not to scratch the fender paint when positioning the sissy bar mounting bracket.

Make sure the turnsignal wiring passes through the cutout (slot). Align all the holes and reinstall

chrome fender rail cover into place. See Figure 1.

5. Insert the supplied 5/16”-18 x 1-1/2” buttonhead bolt through the rear hole of the chrome cover/fender

rail, sissy bar mount bracket, and fender; secure with the stock clipnut. Insert the supplied 5/16”-18 x

1-3/4” buttonhead bolt through the front hole of the chrome cover/fender rail, sissy bar mount bracket,

and fender; secure with the stock locknut. Secure the turnsignal stud with the stock locknut. DO NOT

TIGHTEN AT THIS TIME.

6. Repeat Steps 2–5 on left side.

7. Install the sissy bar between the brackets using the four (4) supplied M8 x 16mm buttonhead bolts.

8. Align sissy bar and torque all bolts to their appropriate values.

9. Reinstall turn signal wiring into retaining clip. Attach the rear reflectors onto the chrome covers

602-1103B / 602-1153B / 602-1203B

Page 1 of 1

DOCUMENT NO. 0017 REV. B

DECORATIVE BACKREST INSERTS AVAILABLE AT COBRAUSA-HD.COM OR YOUR LOCAL COBRA DEALER

To clean your black accessory use a liquid based soap detergent, such as dishwashing soap applied with a soft cloth and

rinse with clean water. Note: Avoid abrasive cleaning methods such as granular or dry cleansers, simple green, Scotch-

Brite or steel wool pads. Abrasives may breach the coating and shorten life.

®23801 E. La Palma Ave., Yorba Linda, Ca 92887 Ph. 714.692.8180 Fax. 714.692.5016

www.cobrausa-hd.com

04/17 ®

Instruction Manual >

602-1103B / 602-1153B / 602-1203B

Page 2 of 2

DOCUMENT NO. 0018 REV. A

FENDER CLIPNUT

STOCK LOCKNUT

5/16”-18 x 1-1/2”

BUTTONHEAD BOLT

FENDER RAIL AND

CHROME COVER

SISSY BAR

MOUNT BRACKET

M8 x 16mm

BOLTS

FIGURE 1

(RIGHT SIDE SHOWN)

PICTURE MAY VARY FROM APPLICATION

(FENDER DOES NOT SEPARATE FROM FENDER RAIL)

5/16”-18 x 1-3/4”

BUTTONHEAD BOLT

STOCK LOCKNUT for

TURNSIGNAL

Dieses Handbuch passt für folgende Modelle

Andere Cobra Motorradzubehör Handbücher

Cobra

Cobra Fi2000 PowrPro Bedienungsanleitung

Cobra

Cobra Fi2000 Bedienungsanleitung

Cobra

Cobra 601-2108 Bedienungsanleitung

Cobra

Cobra 602-2612B Bedienungsanleitung

Cobra

Cobra 4918 Bedienungsanleitung

Cobra

Cobra 05-9349 Bedienungsanleitung

Cobra

Cobra 06-0245-01B Bedienungsanleitung

Cobra

Cobra 602-2601 Bedienungsanleitung

Cobra

Cobra POWRPRO Fi2000 Bedienungsanleitung

Cobra

Cobra Fi2000 Bedienungsanleitung

Cobra

Cobra 6057 Bedienungsanleitung

Cobra

Cobra 602-2500 Bedienungsanleitung

Cobra

Cobra 06-3750 Bedienungsanleitung

Cobra

Cobra 6255RB Bedienungsanleitung

Cobra

Cobra Fi2000 Powrpro Bedienungsanleitung

Cobra

Cobra 602-2046 Bedienungsanleitung

Cobra

Cobra 602-2000B Bedienungsanleitung

Cobra

Cobra 602-2600 Bedienungsanleitung

Cobra

Cobra 02-6468 Bedienungsanleitung

Cobra

Cobra HONDA VLX 600 Bedienungsanleitung

Cobra

Cobra 602-2500 Bedienungsanleitung

Cobra

Cobra 6030RB Bedienungsanleitung

Cobra

Cobra 602-3000 Bedienungsanleitung

Cobra

Cobra 01-3265 Bedienungsanleitung

Beliebte Motorradzubehör Handbücher anderer Marken

SRC

SRC B-TRK502-01-01-SL Bedienungsanleitung

3M Speedglas 9100 MP Bedienungsanleitung

hepco & becker

hepco & becker 6307520 00 01 Bedienungsanleitung

HOMCOM

HOMCOM AA0-077 Bedienungsanleitung

hepco & becker

hepco & becker 6307558 00 01 Bedienungsanleitung

Wunderkind Custom

Wunderkind Custom 106503-F15 Benutzerhandbuch

Dräger

Dräger HPS 3500 Bedienungsanleitung

M-WAVE

M-WAVE SKI Bedienungsanleitung

Kuryakyn

Kuryakyn 6212 Bedienungsanleitung

hepco & becker

hepco & becker 6507504 00 01 Bedienungsanleitung

Tool it

Tool it PROMAX LCD 9.13G Bedienungsanleitung

Custom Dynamics

Custom Dynamics TruWrapz Bedienungsanleitung

Roof

Roof RO200 CARBON Bedienungsanleitung

Kabuto

Kabuto Japan IBUKI Bedienungsanleitung

PUIG

PUIG 5051 Bedienungsanleitung

rizoma

rizoma ZTH050 Bedienungsanleitung

Joubert

Joubert 10001711 Bedienungsanleitung

Sperian

Sperian Optrel p420 Bedienungsanleitung