Code Alarm CA 680 Bedienungsanleitung

IMPORTANT NOTE: The operation of the Security and Convenience System as described in this manual is

applicable to most vehicles. However, due to the configuration of some vehicles, some functions AND/OR SAFETY

PRECAUTIONS may not apply. Please see your installing dealer for more information.

Owner's Manual

CA 680

Remote Vehicle Control System

Deluxe VehicleSecurityandRemote

StartSystemwithTwoWay

Confirming Dot Matrix Remote

Control

Table of Contents

Using Your Remote Control .......................................................... 3

Arming the security system

Pre-arm mode

Disarming the security system

Disabling/Enabling confirmation chirps

Attempted intrusion identification

Two stage door unlock*

Activating the trunk release feature*

Using Your Remote Control, continued.................................... 4

Turning on the vehicle’s headlights*

Activating optional AUX 1*

Activating optional AUX 2*

Activating optional AUX 3*

Activating optional AUX 4*

Using the progressive car finder feature

Using the personal protection alarm

Using the transmitter flashlight feature

Using Your Remote Vehicle Starter ...............................5

Remote starting your vehicle

Entering your vehicle while it is running via remote vehicle start

Using the safety (red handled) control switch

Preheating or Precooling the vehicle’s interior

Turning on the rear window defroster (optional)*

Using the “quick-stop” feature

Using Your Remote Vehicle Starter, continued ...................... 6

Operating the 2 / 4 hour start up timer mode

Operating the temperature start mode

Using Your Remote Vehicle Starter, continued ...................... 7

Operating the daily start timer

Remote start safety features

Using valet mode

Using the optional Turbo Timer feature*

Additional Dot Matrix Remote Control Features ..................... 8

Additional Dot Matrix Remote Control Features, Continued .. 9

Dot Matrix Remote Control Options Menu ............................ 10

Dot Matrix Remote Control Icons and their Indications...... 11

Optional Song Bird Feature* ................................................... 12

Replacing remote control batteries

Emergency Override Procedure ............................................ 13

* May require additional installation labor, components and installation cost

Using Your Remote Control

Arming the Security System

To arm the system, exit the vehicle, close all doors, then press the LOCK icon button on the remote

control. The system will sound twice and the parking lights will flash twice, indicating the system is

armed. The doors will also lock at this time (if equipped and connected). The status indicator (blue

warning light on the dash) will blink steadily, once per second. To arm the system silently, press and

hold the LOCK icon button for 1 second. The parking lights will flash 2 times, indicating the system is

armed, has locked the doors (if equipped and connected) and activated the starter disable feature. The

status indicator (blue warning light on the dash) will blink steadily, once per second.

Pre-arm Mode

If the horn system sounds and the parking lights flash only once, this indicates that the vehicle’s

interior light is on or an entrance is left open. Check to see that all doors hood and trunk are closed

properly. Once all entrances are secured (and the interior light is off), this system will sound/flash

again. The system is now fully armed. (If the entrance is not secured within 4 minutes, the system will

arm and ignore the unsecured entrance until it is closed.)

Disarming the Security System

To disarm the system press the UNLOCK icon button. The system will sound and the parking lights

will flash once, and the doors will unlock (if equipped and connected). To disarm the system silently,

press and hold the UNLOCK icon button for 1 second. The parking lights will flash, indicating the

system is disarmed and has unlocked the doors (if equipped and connected).

Disabling/Enabling Confirmation Chirps

1. Turn the ignition key ON then OFF.

2. Within 10 seconds push and release the valet/override button 3 times.

3. The system will sound 2 times to disable confirmation chirps or 1 time to enable confirmation

chirps.

Attempted Intrusion Identification

This system will inform you if an intrusion attempt has occurred while you were away from the vehicle. If

an intrusion attempt occurred, the system will sound 4 times and the parking lights will flash 3 times

when disarming the system. Enter the vehicle an observe the dash mounted status LED to Identify

which zone was triggered.

1. Shock Sensor- 1 flash, pause 1 flash, etc.

2. Hood or Trunk Pin switch- 2 flashes, pause 2 flashes, etc.

3. Door Entry- 3 flashes, pause 3 flashes, etc.

The intrusion warning indicators are stored in the system’s memory and will be erased when the ignition

key is turned on.

Two Stage Door Unlock (Optional)

If this feature is enabled on your system, pressing the UNLOCK icon button one time on the remote

control will unlock only the driver’s door. Press disarm again to unlock the remaining doors.

Activating the Trunk Release Feature (Optional)

If this feature is enabled on your system, pressing and holding the TRUNK icon button on the remote

control for 2 seconds will open the vehicle’s trunk or hatch.

*Throughout this manual, ‘press’ refers to pressing for less than 1 second; ‘press and hold’ refers to pressing for more

than 2 seconds.

Using Your Remote Control, continued

Turning on the Vehicle’s Headlights (Optional)

If this feature is enabled on your system, pressing and holding the LOCK icon button on the remote

control for 2 seconds will turn on the vehicle’s headlights for 30 seconds.

Activating Optional AUX 1 (Optional)

If this feature is enabled on your system, pressing and holding the LOCK icon button and the TRUNK

icon button on the remote control simultaneously will activate an optional feature. This feature can be

programmed for a wide range of functions like power window or sunroof automation, please consult

your installing dealer to determine functionality of your system.

Activating Optional AUX 2 (Optional)

If this feature is enabled on your system, pressing and holding the OPTION button on the remote

control will activate an optional feature. AUX 2 is generally used to turn on the rear window defroster

after the vehicle has been remote started, but can also be programmed for a wide range of functions,

please consult your installing dealer to determine functionality of your system.

Activating Optional AUX 3 (Optional)

If this feature is enabled on your system, pressing and holding the LOCK icon button and the OPTION

button on the remote control simultaneously will activate an optional feature. This feature can be

programmed for a wide range of functions like power window or sunroof automation, please consult

your installing dealer to determine functionality of your system.

Activating Optional AUX 4 (Optional)

If this feature is enabled on your system, pressing and holding the UNLOCK icon button and the

OPTION button on the remote control simultaneously will activate an optional feature. This feature

can be programmed for a wide range of functions like power window or sunroof automation, please

consult your installing dealer to determine functionality of your system.

Using the Progressive Car Finder Feature

2-way Dot Matrix Remote Control:

Press the LOCK icon button and the UNLOCK icon button on the remote control to locate your vehicle.

The system will sound 5 times at low volume increasing in volume each of 3 times the button is

pressed.

1-way Six Button Remote Control:

Press the “ *“ icon button on the remote control to locate your vehicle. The system will sound 5

times at low volume increasing in volume each of 3 times the button is pressed.

Using the Personal Protection Alarm (Panic)

2-way Dot Matrix Remote Control:

Press and hold the LOCK icon button and the UNLOCK icon button on the remote control for 2

seconds to activate the personal protection alarm. The system will sound for 30 seconds. Pressing

any button on the remote control will turn the personal protection alarm off.

1-Way Six Button Remote Control:

Press and hold the “ *“ icon button on the remote control for 2 seconds to activate the personal

protection alarm. The system will sound for 30 seconds. Pressing any button on the remote control

will turn the personal protection alarm off.

Using the Transmitter Flashlight Feature

The (1) 6 button (non-confirming) remote control included with your system has a flashlight bulb built

into the top of the remote control. Pressing and holding the LIGHT icon button on the remote control

will activate the flashlight until the button is released.

Using Your Remote Vehicle Starter

Remote Starting Your Vehicle

To activate the remote vehicle start function, press and release the OPTION button on the remote control

two (2) times within 2 seconds. The system will sound, the parking lights will flash 1 time and the system

will check the vehicle to ensure it is safe to start, if all safety parameters are correct, the vehicle will start

within 5 seconds (diesel vehicles will take longer). The vehicle’s parking lights will turn on (or flash

depending on system settings) as a visual indication that the vehicle has started and is running. Press

and release the OPTION button on the remote control two (2) times within 2 seconds again to turn the

vehicle off.

If your vehicle stalls or does not start, the system will pause 5 seconds, then try 2 more times to start the

vehicle (a total of 3 attempts). The system will pause 5 seconds between each start attempt. If the vehicle

does not start after the fourth attempt, the system will abort the remote vehicle start process.

Entering the Vehicle while it is running via Remote Vehicle Start

1. Unlock the vehicle’s doors.

2. Enter the vehicle. DO NOT PRESS THE BRAKE PEDAL!

3. Insert the key into the ignition switch and turn to the ON or RUN position.

4. Press the brake pedal. The remote vehicle starter will disengage and the vehicle will operate normally.

Using the Safety (Red Handled) Control Switch

The safety (red handled) control switch allows you to temporarily disable the remote vehicle starter feature,

this is especially helpful when having your vehicle serviced or valet parked. To disable the remote start,

move the safety (red handled) control switch to the OFF position.

Preheating or Precooling the Vehicle’s interior

Before exiting the vehicle, set the temperature controls to the desired setting and operation. After the

system starts the vehicle, the heater or air conditioning will activate and heat or cool the vehicle’s interior to

your setting.

Turning on the Rear Window Defroster (Optional)

While the vehicle is running via remote vehicle start, press and hold the OPTION button on the remote

control for 2 seconds. The rear window defroster will turn on for 10 minutes or the vehicles preset time

limit.

Using the “Quick-stop” Feature

If you want to make a short stop and keep your vehicle running (to keep the interior warm or cool), the

quick-stop feature allows you to do this while keeping your vehicle secure and your keys with you.

To engage quick stop:

1. Stop the vehicle and place the transmission in PARK.

2. With your foot off the brake pedal, press and release the OPTION button on

the remote control two (2) times within 2 seconds. The parking lights will turn

on indicating the vehicle is now running via remote vehicle start.

3. Remove the keys from the ignition and exit the vehicle. Press the LOCK icon

button on the remote control to lock the vehicle’s doors if desired.

Note: Do not leave children or animals unattended in the vehicle when using the

quick-stop feature.

Using Your Remote Vehicle Starter, continued

Operating the 2 / 4 Hour Start Up Timer Mode

The system has the ability to start the vehicle every 2 or 4 hours over a 48 hour period. This feature is

especially useful in cold climates where the only means to keep the engine and engine fluids warm is

to periodically start the engine.

WARNING!

Be certain that the vehicle is outdoors before using this or any remote starting device. A running

engine produces dangerous carbon monoxide fumes which can be harmful or fatal if prolonged

exposure occurs. DO NOT remote start the vehicle if is garaged.

Selecting between 2 and 4 hour start up: (default 4 hour)

1. Begin with the safety (red handled) control switch in the ON position.

2. Turn the ignition switch ON then OFF.

3. Within 10 seconds move the safety (red handled) control switch OFF, ON, OFF, ON

(2 switch cycles) to select a 2 hour start timer. After 10 seconds the parking lights

will flash and the system will sound 2 times indicating that the 2 hour start timer is selected.

3a. Within 10 seconds move the safety (red handled) control switch OFF, ON, OFF, ON,

OFF, ON, OFF, ON (4 switch cycles) to select a 2 hour start timer. After 10 seconds the

parking lights will flash and the system will sound 4 times indicating that the 4 hour start

timer is selected.

To begin the 2 / 4 hour start up timer mode:

1. Turn the ignition key ON then OFF.

2. Within 10 seconds press the OPTION button on the remote control four (4) times.

The parking lights will flash and the system will sound 4 times indicating the 2 / 4 hour start

up timer mode has been activated. The vehicle will start every 2 or 4 hours and run

for the preset time limit (5, 10, 15 or 20 minutes) and then shutdown. This will continue

for 48 hours unless the 2 / 4 hour start up timer is cancelled.

To begin the 2 / 4 hour start up timer mode from the remote control:

1. Activate the remote vehicle start feature using the remote control.

2. Shutdown the remote vehicle starter using the remote control (press the OPTION

button 2 times).

3. Within 10 seconds press OPTION button on the remote control 4 times.

The parking lights will flash and the system will sound 4 times indicating the 2 / 4 hour start

up timer mode has been activated. The vehicle will start every 2 or 4 hours and run for the preset

time limit (5, 10, 15 or 20 minutes) and then shutdown. This will continue for 48 hours unless the

2 / 4 hour start up timer is cancelled.

To cancel the 2 /4 hour start up timer mode:

1. Start the vehicle using the ignition key, then press the brake pedal.

2. Activate the remote vehicle start feature using the remote control.

Operating the Temperature Start Mode

The system has the ability to start the vehicle when the temperature reaches 0 degrees. To toggle this

feature on/off using the remote control press the UNLOCK and OPTION buttons simultaneously for 1

second.

Note: This feature must be turned ON in options programming. Check with your installing dealer to

insure this feature is set to the ON position.

Using Your Remote Vehicle Starter, continued

Operating the Daily Start Timer

The system has the ability to start your vehicle based on a 24-hour countdown timer. To activate this

feature, using the remote control press the LOCK and OPTION buttons simultaneously for 1 second. The

system will begin counting down from 24 hours, and start the vehicle when it reaches zero. This timer will

only activate 1 time and will need to be reactivated for each 24 hour period.

Remote Start Safety Features

For safety and security reasons, the system will shutdown or prevent the remote vehicle starter from

activating if any of the following occur:

1. The vehicle hood is open.

2. The brake pedal is pressed prior to turning the ignition key to the ON position.

3. The engine reaches 3 times its normal idle speed.

4. The safety (red handled) control switch is turned to the OFF position.

Using Valet Mode

To engage valet mode:

1. Turn the ignition key to the ON position.

2. Press and hold the emergency override button.

3. The blue dashboard mounted LED will light solid indicating that the system is in

valet mode.

When valet mode is activated the dash mounted status LED will light solid, and all security functions will

be disabled.

To disengage valet Mode:

1. Turn the ignition key to the ON position.

2. Press and release the emergency override button.

3. The blue dashboard mounted LED will turn off indicating that the system has

exited valet mode.

When the valet mode has been deactivated the dash mounted status LED will turn off and all security

functions will be enabled the next time the system is armed.

Using the Optional Turbo Timer Feature

To engage the turbo timer feature:

1. With the vehicle running via the ignition key, and your foot off of the brake pedal.

2. Engage the vehicle’s parking brake.

3. The vehicle’s parking lights will turn on to verify the turbo timer feature has been activated.

4. Turn the ignition key OFF, the vehicle will continue to run for an additional 5 minutes.

To disengage the turbo timer feature:

1. Press the vehicle’s brake pedal.

2. Turn the safety (red handled) control switch to the OFF position.

Additional Dot Matrix Remote Control Functions

Dot Matrix Remote Control Display Illumination

Press and release the “F” button on the LCD remote control one time. The display will illuminate for 10

seconds.

Dot Matrix Remote Control Vibrate or Tones

Press an release the “F” button and the UNLOCK icon button on the LCD remote control simultaneously

one time to toggle between beep tones and vibrate mode. The LCD remote control will either beep or

vibrate to indicate which mode is selected.

Page Call Out

From within the vehicle, press and hold the emergency override button for 4 seconds, the LCD remote

control will emit a beep tone to indicate that someone is calling you to the vehicle.

Countdown Timer

The Dot Matrix remote control is equipped with a countdown timer for situations where an alert tone may

be needed to remind you of something important. The countdown timer allows you to set the timer up to

19 hours and 59 minutes. Refer to page 10 for programming.

Parking Meter Timer

The Dot Matrix remote control is equipped with a parking meter timer that allows you to set a countdown

timer for 10, 20, 30, 60, 90 or 120 minutes. The LCD remote control will emit a beep tone when the timer

expires. Press ”F” and OPTION simultaneusly to select desired time.

Alarm Clock

The Dot Matrix remote control is equipped with a built in alarm clock that can be set to beep at a certain

time each day. The alarm clock must be set, and the feature turned on. Refer to page 10 for

programming.

Bypassing The Shock Sensor

There are 3 additional modes of operation in which your system will react to the shock sensor, FULL

TRIGGERONLY, ALLOFF, or CITYMODE.

Press LOCK once to arm the system.

Pressing LOCK again within 2 seconds will set the system to FULL TRIGGER ONLY in which the system

will ignore the light touch setting.

Pressing LOCK again within 2 seconds will set the system to ALL OFF. In this mode the system will not

react to the shock sensor and the 2-way LCD remote will display the shock sensor icon.

Pressing LOCK again within 2 seconds will set the system to CITY MODE. In this mode the light touch

horn output is extended to a full 10 seconds and full trigger horn output is shortend to 15 seconds, no

icon is displayed.

NOTE: The system will only change the shock sensor setting for one arm cycle and will be defaulted back to

normal operation the next time the system is armed.

Additional Dot Matrix Remote Control Functions, cont.

Check Vehicle Status

Press the LOCK icon button, TRUNK icon button and OPTION button simultaneously for 1 second. The Dot

Matrix remote control will display the system’s current status.

Check Temperature

Press the TRUNK icon button and OPTION button simultaneously for 1 second. The LCD remote control will

display the vehicle’s interior temperature.

Trigger History

This feature allows you to review the last four triggers to the system from the Dot Matrix remote control. See

the Dot Matrix Remote Control Options Menu on page 10.

Language Set

The Dot Matrix Remote allows the user to select from three different languages for the on screen text, English

(default), French and Spanish. See the Dot Matrix Remote Control Options Menu on page 10.

Homepage Select

This feature lets the user select between a text or icon display to indicate vehicle status. See the Dot Matrix

Remote Control Options Menu on page 10.

Homepage Option Set

This feature allows you to select between displaying the clock or personalized text on the screen. See the Dot

Matrix Remote Control Options Menu on page 10.

Set Name for Channel

The systems AUX outputs, refered to as chanels on the remote control can be customized with personal text

to describe the feature that it may be being used for. See the Dot Matrix Remote Control Options Menu on

page 10.

Battery Save Mode

Press the LOCK icon button and “F” button simultaneously. Note that in this mode the remote will not send or

receive vehicle status unless you press a button on the remote.

Additional Dot Matrix Remote Control Functions, cont.

Dot Matrix Remote Control Options Menu

Accessing the Options Menu

1. Press and hold the “F” button for 3 seconds.

2. Use the TRUNK or OPTION button to scroll up and down through the the menu.

3. Press the “F” button to select the setting to change.

4. Use the LOCK/UNLOCK buttons to move the cursor left and right (where needed). Use the TRUNK/OPTION

buttons to change up/down alpha/numeric symbols.

5. Press “F” to keep setting and back out to previous menu.

6. Press and hold “F” for 3 seconds to exit options menu.

Selectable Features in the Options Menu

12-1 Trigger History

Records the previous four triggers

12-2 Time Set

12-3 Alarm Clock

12-4 Countdown Timer

12-5 Vibrate/Tone

12-6 Alarm Clock Music

12-7 Temperature Set

Celsius, Fahrenheit

12-8 Language Set

English, French, Spanish

12-9 Homepage Select

Text Mode, Icon Mode

12-10 Homepage Option Set

Clock, Personalized Text

12-11 Set Name for Channel

Personalize AUX Outputs 1-4/Channels 4-7

12-12 Set to Default

NOTE: Personalized sections in the Options menu allow you to change the text that appears on the screen.

Inhaltsverzeichnis

Andere Code Alarm Autoalarmanlage Handbücher

Code Alarm

Code Alarm CA-500 Bedienungsanleitung

Code Alarm

Code Alarm ca 1552 Professional Series Bedienungsanleitung

Code Alarm

Code Alarm CA 180 Bedienungsanleitung

Code Alarm

Code Alarm TW-1 Bedienungsanleitung

Code Alarm

Code Alarm CATX610 Betriebsanleitung

Code Alarm

Code Alarm CA 170 Bedienungsanleitung

Code Alarm

Code Alarm ca1555 Bedienungsanleitung

Code Alarm

Code Alarm 420A Bedienungsanleitung

Code Alarm

Code Alarm CA 420 Bedienungsanleitung

Code Alarm

Code Alarm ca1153 Bedienungsanleitung

Code Alarm

Code Alarm PowerCode PC 7300 Bedienungsanleitung

Code Alarm

Code Alarm PowerCode PC 6100 Bedienungsanleitung

Code Alarm

Code Alarm Professional ca6153 Bedienungsanleitung

Code Alarm

Code Alarm ca6355E Bedienungsanleitung

Code Alarm

Code Alarm PROFESSIONAL CA 1045 Bedienungsanleitung

Code Alarm

Code Alarm PROFESSIONAL SERIES CA 1551 Bedienungsanleitung

Code Alarm

Code Alarm ELITE Series Bedienungsanleitung

Code Alarm

Code Alarm CA 170 Bedienungsanleitung

Code Alarm

Code Alarm CA-140 Bedienungsanleitung

Code Alarm

Code Alarm Elite CA6155e Bedienungsanleitung

Code Alarm

Code Alarm ca 1051 Bedienungsanleitung

Code Alarm

Code Alarm CA 310 Bedienungsanleitung

Code Alarm

Code Alarm ca 2051 Bedienungsanleitung

Code Alarm

Code Alarm PROFESSIONAL SERIES Bedienungsanleitung

Beliebte Autoalarmanlage Handbücher anderer Marken

Clifford

Clifford 3606X Bedienungsanleitung

Ultra Start

Ultra Start 2500M SERIES Bedienungsanleitung

Ultra Start

Ultra Start 650 Series Bedienungsanleitung

Audiovox

Audiovox Prestige Platinum+ APS-511C Bedienungsanleitung

Sparkrite

Sparkrite SRA8 Bedienungsanleitung

Viper

Viper 4708V Bedienungsanleitung

Federal Signal Corporation

Federal Signal Corporation Pathfinder Siren Series Handbuch

Falcon

Falcon Predator XL3 Benutzerhandbuch

Audiovox

Audiovox Auto Security XR91 Betriebsanleitung

Clifford

Clifford Sabre II Bedienungsanleitung

CrimeStopper

CrimeStopper CS-8717 Kurzanleitung

Ultra Start

Ultra Start 450 SERIES Bedienungsanleitung

Scytek electronic

Scytek electronic Vectra X3 Bedienungsanleitung

Excalibur

Excalibur AL-1860-EDPB Bedienungsanleitung

Clifford

Clifford CYBER 2 Bedienungsanleitung

Gemini

Gemini 7057 Bedienungsanleitung

FlashLogic

FlashLogic FLRSBA PRESTIGE Bedienungsanleitung

Magicar

Magicar FAI-440 Bedienungsanleitung