Code Alarm CATX610 Betriebsanleitung

Model CATX610

Programming Guide

The keychain transmitters included with the system have been pre-

programmed at the factory, with each button pre-assigned to control a specific

function of the system.

The system will store codes from up to 4 different transmitters. If a 5th

transmitter is programmed to the system, then the first transmitter

programmed to the system will be erased from the system’s memory.

To program new or additional transmitters:

1. Enter the vehicle, and turn the ignition switch to the ON position.

2. Press and release the programming button switch 3 times.

3. The dash mounted LED will flash 1 time, and the horn/siren will sound 1

time, indicating that the system is ready to accept programming of channel 1

which is arm/lock.

4. Press and hold the lock icon button of the transmitter you wish to program

for 4 seconds or until a long chirp is heard from the horn/siren.

4a. Repeat step 4 for any additional transmitter you wish to program.

5. Press and release the programming button switch 1 time to advance to

channel 2. The dash mounted LED will flash 2 times and the orn/siren will

sound 2 times, indicating that the system is ready to accept programming for

channel 2 which is disarm/unlock.

6. Press and hold the unlock icon button of the transmitter you wish to

program for 4 seconds or until a long chirp is heard from the horn/siren.

6a. Repeat step 6 for any additional transmitter you wish to program.

7. Press and release the programming button switch 1 time to advance to

channel 3. The dash mounted LED will flash 3 times and the horn/siren will

sound 3 times, indicating that the system is ready to accept programming for

channel 3 which is trunk release/remote start.

8. Press and hold the trunk/key icon button of the transmitter you wish to

program for 4 seconds or until a long flash from the parking lights.

8a. Repeat step 8 for any additional transmitter you wish to program.

9. Press and release the programming button switch 1 time to advance to

channel 3. The dash mounted LED will flash 4 times and the horn/siren will

sound 4 times, indicating that the system is ready to accept programming for

channel 4 which is an optional device.

10. Press and hold the option button of the transmitter you wish to program

for 4 seconds or until a long flash from the parking lights.

10a. Repeat step 10 for any additional transmitter you wish to

program.

Changing the Remote Control Battery

The 12-volt alkaline battery supplied in your remote

transmitter should last approximately one year, depending on

usage. When the battery begins to weaken, you will notice a

decrease in range, or the distance from your vehicle that

your remote transmitter will operate. Follow the instructions

below to change the remote transmitter battery.

For Customer Service and Product information Call

1-800-421-3209

1. Insert the edge of a coin into the slot at the side of the

remote control. Twist the coin to pry the remote control

halves apart.

2. Remove the old battery and replace with a new one.

Be sure to observe the (+) and (-) signs in the battery

compartment.

3. Carefully snap the case halves back together, then test

the remote control.

Model CATX610

Programming Guide

Inhaltsverzeichnis

Andere Code Alarm Autoalarmanlage Handbücher

Code Alarm

Code Alarm ELITE Series Bedienungsanleitung

Code Alarm

Code Alarm PROFESSIONAL SERIES Bedienungsanleitung

Code Alarm

Code Alarm Elite CA6155e Bedienungsanleitung

Code Alarm

Code Alarm ca1153 Bedienungsanleitung

Code Alarm

Code Alarm ca 5152 Bedienungsanleitung

Code Alarm

Code Alarm CATX2LED Betriebsanleitung

Code Alarm

Code Alarm 2000 Bedienungsanleitung

Code Alarm

Code Alarm CA-500 Bedienungsanleitung

Code Alarm

Code Alarm CA 6151 Bedienungsanleitung

Code Alarm

Code Alarm CA 671 Bedienungsanleitung

Code Alarm

Code Alarm CATX130 Betriebsanleitung

Code Alarm

Code Alarm Car Alarm CA-310 Bedienungsanleitung

Code Alarm

Code Alarm CA100 Bedienungsanleitung

Code Alarm

Code Alarm CA 1150 Bedienungsanleitung

Code Alarm

Code Alarm Professional ca6153 Bedienungsanleitung

Code Alarm

Code Alarm ca 1151 Bedienungsanleitung

Code Alarm

Code Alarm CA-135 Bedienungsanleitung

Code Alarm

Code Alarm Professional Series CA 1550 Bedienungsanleitung

Code Alarm

Code Alarm Professional caSECRS Bedienungsanleitung

Code Alarm

Code Alarm CSI-300 Bedienungsanleitung

Code Alarm

Code Alarm 420A Bedienungsanleitung

Code Alarm

Code Alarm TW-1 Bedienungsanleitung

Code Alarm

Code Alarm PROFESSIONAL CA 1045 Bedienungsanleitung

Code Alarm

Code Alarm 2000 Bedienungsanleitung

Beliebte Autoalarmanlage Handbücher anderer Marken

Clifford

Clifford 3606X Bedienungsanleitung

Ultra Start

Ultra Start 2500M SERIES Bedienungsanleitung

Ultra Start

Ultra Start 650 Series Bedienungsanleitung

Audiovox

Audiovox Prestige Platinum+ APS-511C Bedienungsanleitung

Sparkrite

Sparkrite SRA8 Bedienungsanleitung

Viper

Viper 4708V Bedienungsanleitung

Federal Signal Corporation

Federal Signal Corporation Pathfinder Siren Series Handbuch

Falcon

Falcon Predator XL3 Benutzerhandbuch

Audiovox

Audiovox Auto Security XR91 Betriebsanleitung

Clifford

Clifford Sabre II Bedienungsanleitung

CrimeStopper

CrimeStopper CS-8717 Kurzanleitung

Ultra Start

Ultra Start 450 SERIES Bedienungsanleitung

Scytek electronic

Scytek electronic Vectra X3 Bedienungsanleitung

Excalibur

Excalibur AL-1860-EDPB Bedienungsanleitung

Clifford

Clifford CYBER 2 Bedienungsanleitung

Gemini

Gemini 7057 Bedienungsanleitung

FlashLogic

FlashLogic FLRSBA PRESTIGE Bedienungsanleitung

Magicar

Magicar FAI-440 Bedienungsanleitung