Code Alarm PROFESSIONAL SERIES Bedienungsanleitung

1caSECRS / ca1BTW6 4280931 Owners rev A.

IMPORTANT NOTE: The operation of the Security and Convenience System as described in this manual is

applicable to most vehicles. However, due to the conguration of some vehicles, some functions AND/OR

SAFETY PRECAUTIONS may not apply. Please see your installing dealer for more information.

PROFESSIONAL

SERIES

Owner’s Guide

For Model:

CASECRS

CA1BTW6

Deluxe Vehicle Remote Start System

Table of Contents

Using Your Remote Control .......................................................3

Remote Starting your Vehicle ................................................3

Remote Start Shutdown.........................................................3

Entering the vehicle while it is running via Remote Start.......3

Preheating or Cooling the Vehicle’s Interior...........................3

Using the “Quick-stop” Feature..............................................4

User Programmable Run Time / Run Time Extension ...........4

Remote Start Safety Features ...............................................5

Remote Start Valet Mode............................................................5

System LED and Light Flash Indications .................................6

 2WayRemoteControlNotications.........................................6

Remote Control Programming...................................................7

Replacing Remote Control Batteries ........................................8

3caSECRS / ca1BTW6 4280931 Owners rev A.

Remote Starting Your Vehicle

To activate the remote start function, press and release the button 2 times within 2

seconds. The system will sound, the parking lights will ash 1 time and the system

will check the vehicle to ensure it is safe to start. If all safety parameters are correct,

the vehicle will start. The vehicle’s parking lights will turn on (or ash depending on

system settings) as a visual indication that the vehicle has started and is running.

If your vehicle stalls or does not start, the system will pause 5 seconds, then try

3 more times to start the vehicle (a total of 4 attempts). The system will pause 5

seconds between each start attempt.

Remote Start Shutdown

Press and hold the button for 3 seconds to turn the vehicle off. Pressing the

vehicle’s brake will also shutdown the remote start.

Entering the Vehicle while it is Running via Remote Vehicle Start

1. Unlock the vehicle’s doors. (Using the vehicle’s factory remote)

2. Enter the vehicle. DO NOT PRESS THE BRAKE PEDAL!

3. Insert the key into the ignition switch and turn to the ON or RUN

position.

4. Press the brake pedal. The remote vehicle starter will disengage and

the vehicle will operate normally.

Preheating or Precooling the Vehicle’s interior

Before exiting the vehicle, set the temperature controls to the desired setting and

operation. After the system starts the vehicle, the heater or air conditioner will

activate and heat or cool the vehicle’s interior to your setting.

Using Your Remote Control

Using the “Quick-stop” Feature

If you want to make a short stop and keep your vehicle running (to keep the interior

warm or cool), the quick-stop feature allows you to do this while keeping your vehicle

secure and your keys with you.

To engage Quick Stop:

1. Stop the vehicle and place the transmission in PARK.

2. With your foot off the brake pedal, press and release the button 2

times within 2 seconds. The LED will ash 3 times to conrm quick

stop is entered.

3. Remove the keys from the ignition and exit the vehicle. Press the

button to lock the vehicle’s doors if desired. (Using the vehicle’s factory

remote)

Note: Do not leave children or animals unattended in the vehicle when using the

quick-stop feature.

User Programmable Run Time / Run Time Extension

The system has the ability to allow the user to extend the time the vehicle will be

running under control of the remote start. This will only extend the run time back to

the current run time setting during the current remote start cycle. If your system is

set to run 15 minutes and the time remaining is 4 minutes, extending the run time

will reset the countdown timer to 15 minutes and your vehicle will continue to run for

another 15 minutes. Follow the steps below to extend the vehicle’s run time.

1. The remote start must already be active.

2. Press and release the button 4 times.

3. The system will chirp 1 time and ash the parking lights 4 times to

conrm that the run time has been reset.

5caSECRS / ca1BTW6 4280931 Owners rev A.

Remote Start Valet Mode

When valet mode is activated the status LED will light solid, and all security and

remote start functions will be disabled. To enter or exit valet mode simply follow the

steps outlined below:

1. Turn the vehicle’s ignition ON.

2. Push and hold the programming/valet button.

3. The LED will turn on solid when valet mode is active

4. Release the programming/valet button.

Remote Start Safety Features

For safety and security reasons, the system will shutdown or prevent the remote

vehicle starter from activating if any of the following occur:

1. The vehicle’s hood is open.

2. The brake pedal is pressed prior to turning the ignition key to the ON

position.

3. The engine is over-revved (tach checking only).

4. Valet Mode is active.

2WayRemoteControlNotications

FUNCTION BEEPS / LED FLASHES

Activation 1 Beep / Flash

Conrm Remote Start 4 Beeps / Flashes (repeats 3 times)

Remote Start Running 1 Flash per 3 seconds for duration run time

Remote Start Shutdown 3 Long Beep / Long Flashes (repeats 3 times)

Low Battery 2 Beeps / Flashes when button is pressed

System LED and Light Flash Indications

Status LED Flash Indications

LED Flashes Function

ON (Solid) Valet Mode

Remote Start Shutdown Diagnostics

Parking Light Flashes Shutdown Zone

3 Flashes Hood / Brake Input

4 Flashes Remote Start Valet Mode

7 Flashes Tach not learned / Crank Average not

learned

7caSECRS / ca1BTW6 4280931 Owners rev A.

Remote Control Programming

1. Turn the ignition ON.

2. Press and hold the valet/override button located on the antenna.

3. Within 10 seconds the LED’s will begin to ash.

4. Press 1 button of each transmitter you wish to program, the LED’s will

ash to conrm each transmitter.

5. Turn the ignition OFF

NOTE: This system has 1 button programming which programs all channels of the

system.

NOTE: The system will hold up to 4 transmitters in memory, programming a 5th

transmitter will erase the oldest transmitter in memory.

Programmed Transmitter Notication

As a security precaution each time the vehicle’s ignition is turn on the status LED

light with ash the number of transmitters programmed into the system. This helps

to identify unauthorized transmitters from accessing your vehicle. If you believe an

unauthorized transmitter has been programmed to your system, contact your installing

dealer for assistance.

1 Way Remote Control, CAT1LR:

The battery (model CR2032) inside each remote control should last approximately 1

year under normal use. When the battery becomes weak you will notice the remote

control range (the distance from the vehicle the remote control will work) deteriorate

and the small LED on the remote control will dim. To replace the battery in the remote

control:

1. Unsnap and disassemble the halves of the remote control.

2. Remove the old battery, observing the +/- symbols on the battery

and replace with new CR2032 battery.

3. Reassemble the halves of the remote control.

4. Test operation of the remote control.

Replacing Remote Control Batteries

2 Way Remote Control, CAT1TW6:

The battery (model CR250) inside each remote control should last approximately 10

months under normal use. When the battery become weak you will notice the remote

control range (the distance from the vehicle the remote control will work) deteriorate

and the small LED on the remote control will dim. To replace the battery in the remote

control:

1. Remove 1 screw and disassemble the halves of the remote control.

2. Remove the old battery, observing the +/- symbols on the battery

and replace with a new CR2450 battery.

3. Reassemble the halves of the remote control and reinstall the screw.

4. Test operation of the remote control.

9caSECRS / ca1BTW6 4280931 Owners rev A.

Voxx Electronics Corporation.

Customer Service 1-800-421-3209

WWW.CODE-ALARM.COM

FCC COMPLIANCE

This device complies with Part 15 of the FCC rules and with RSS-210 of

Industry Canada. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including any interference that

may cause undesired operation.

Warning!

Changes or modications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

Andere Handbücher für PROFESSIONAL SERIES

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Code Alarm Fernstartsystem Handbücher

Code Alarm

Code Alarm PC 4300 Bedienungsanleitung

Code Alarm

Code Alarm ca 4552 Bedienungsanleitung

Code Alarm

Code Alarm CA-520A Bedienungsanleitung

Code Alarm

Code Alarm CA-630 Bedienungsanleitung

Code Alarm

Code Alarm Elite ca6555E Bedienungsanleitung

Code Alarm

Code Alarm CA 4055 Bedienungsanleitung

Code Alarm

Code Alarm PC 7400 Bedienungsanleitung

Code Alarm

Code Alarm ca 4552 Bedienungsanleitung

Code Alarm

Code Alarm ca5154 professional Series Bedienungsanleitung

Code Alarm

Code Alarm CA-500 Bedienungsanleitung

Code Alarm

Code Alarm CA-630 Bedienungsanleitung

Code Alarm

Code Alarm ca5553sst Bedienungsanleitung

Code Alarm

Code Alarm SRT 9000 Bedienungsanleitung

Code Alarm

Code Alarm CA-535 Bedienungsanleitung

Code Alarm

Code Alarm PC 7500 Bedienungsanleitung

Code Alarm

Code Alarm ca6554 Bedienungsanleitung

Code Alarm

Code Alarm SRT 9000 Bedienungsanleitung

Code Alarm

Code Alarm CA 1055 Bedienungsanleitung

Code Alarm

Code Alarm GUARDIAN CPL 100 Bedienungsanleitung

Code Alarm

Code Alarm Professional Series CA 5050 Bedienungsanleitung

Code Alarm

Code Alarm ca6553 Bedienungsanleitung

Code Alarm

Code Alarm Professional Series CA 5050 Bedienungsanleitung

Code Alarm

Code Alarm F60 Bedienungsanleitung

Code Alarm

Code Alarm ca 1051 Bedienungsanleitung

Beliebte Fernstartsystem Handbücher anderer Marken

AstroStart

AstroStart 803U Bedienungsanleitung

Durite

Durite 0-649-20 Handbuch

EINHELL

EINHELL BT-PS 1000 Handbuch

Linear

Linear ACCESS AK-21 Technische Daten

Soundstream

Soundstream TARANTULA RS.2 Bedienungsanleitung

Jaycar Electronics

Jaycar Electronics MB3752 Bedienungsanleitung

Ultra Start

Ultra Start 72 Series Bedienungsanleitung

ADS

ADS FLASHLOGIC FLRSVW1 Bedienungsanleitung

Selecta

Selecta JS012 Bedienungsanleitung

Black Widow Security

Black Widow Security BW RAS 400 Bedienungsanleitung

Vector

Vector Power City DK080706 Beilage

Ozito

Ozito OJS-800 Bedienungsanleitung

Profi-Partner

Profi-Partner 46387 Bedienungsanleitung

EZ STARTER

EZ STARTER EZ-45 Bedienungsanleitung

Viper

Viper 4204 Bedienungsanleitung

Essex Electronics

Essex Electronics KE-1701 Bedienungsanleitung

EINHELL

EINHELL EGS 3600 Handbuch

Rooboost

Rooboost RB-1750WP Bedienungsanleitung