Code Alarm GUARDIAN CPL 100 Bedienungsanleitung

IMPORTANT NOTE: The operation of the Security and Convenience System as described in this manual is

applicable to most vehicles. However, due to the configuration of some vehicles, some functions AND/OR SAFETY

PRECAUTIONS may not apply. Please see your installing dealer for more information.

CPL 100

Owner's Manual

Keyless Entry Upgrade

Security System

Table of Contents

Features and Benefits............................................................... 3

System Functions ...................................................................... 4

Arming the system

Pre-arm mode

Disarming the system

Using valet mode

When Your Security System is Triggered ............................... 4

When Your Security System is Triggered, Continued ............ 5

Attempted Intrusion identification

Emergency Disarm Procedure................................................. 5

Basic Troubleshooting .............................................................. 5

Warranty .................................................................................... 6

Features and Benefits

Two Easy-to-Use Weather-Resistant Remote Controls

The upgrade security system utilizes your factory keyless entry remote controls and adds a complete

vehicle security system while retaining factory functions.

All Entrances Protected

Opening any door or entrance protected by the security system triggers the vehicle’s horn and flashes the

parking lights.

Starter Disable

The CPL Security System protects your vehicle from theft by disabling the starter when the system is

armed.

Interior Theft Sensor

This sensor guards against vehicle body damage, theft of vehicle equipment (such as air bags), and

personal belongings inside the vehicle.

Interior Status Indicator

The bright-red warning light is an effective visual deterrent to a would-be thief.

IMPORTANT NOTE: The operation of the CPL Security System as described in this manual is applicable to most

vehicles. However, due to the engine type and configuration of some vehicles, some functions AND/OR SAFETY

PRECAUTIONS may not apply. Please see your installing dealer for more information.

System Functions

Arming the Security System

To arm the system, exit the vehicle, close all doors, then press the LOCK button on your keyless entry

remote control. The system will flash the parking lights 2 times, indicating the system is armed, and

activated the starter disable feature. The status indicator (red warning light) will blink steadily, once per

second.

Pre-arm Mode

If the system sounds 1 time and the parking lights flash only 1 time, this indicates that the vehicle’s

interior light is on or an entrance is left open. Check to see that all doors hood and trunk are closed

properly. Once all entrances are secured (and the interior light is off), this system will sound/flash

again. The system is now fully armed. (If the entrance is not secured within 4 minutes, the system will

arm and ignore the unsecured entrance until it is closed.)

Disarming the Security System

To disarm the system press the UNLOCK button. The system will flash the parking lights 1 time.

Using Valet Mode

To engage valet mode:

1. Turn the ignition key ON/OFF, ON/OFF, ON/OFF.

2. The red LED will flash 2 times quickly then pause indicating that the system is in

valet mode.

When valet mode is activated all security functions will be disabled.

To disengage valet mode:

1. Turn the ignition key ON/OFF, ON/OFF, ON/OFF.

2. The red LED will turn off indicating that the system has exited valet mode.

When Your Security System is Triggered

The CPL Security System will trigger if one of the following events occurs while the system is armed:

•Any protected entrance is opened.

•The vehicle ignition is turned on.

•The vehicle is jolted hard enough to signal the impact sensor.

Once the alarm is triggered, the horn will sound and the vehicles parking lights will flash for 30 seconds.

The system will then re-arm, awaiting the next intrusion attempt.

When Your Security System is Triggered, Continued

Attempted Intrusion Identification

Pressing UNLOCK after a full 30 second trigger cycle has completed, the horn will honk 4 times and the

LED will flash a number of times to indicate which input triggered the alarm. Turning on the ignition or

pressing the valet/override button will reset the LED flashes, pressing the valet/override button will also

honk the horn to match the LED flashes before it resets.

Number of flashes:

1 - Interior Theft Sensor (Shock Sensor)

2 - Door Input

4 - Hood/Trunk input

5 - Ignition

Emergency Disarm Procedure

If your remote control is lost or fails to function, use this procedure to disarm the CPL Security System

and start your vehicle.

1 - Use the keys to enter the vehicle. The alarm will sound once the door is opened.

2 - Insert the key into the ignition and turn to the ON position.

3 - Locate and press the emergency override button. The alarm will turn off and then you will be

able to start the vehicle.

Your Emergency Override Button is Located:

_________________________________________

Basic Trouble Shooting

Symptom Problem Solution

Remote does not work: Weak or dead battery. Change battery.

System will not arm: Door or entrance is open. Close entrance.

Courtesy light is on. Turn courtesy light off.

System is in Valet mode. Exit Valet mode.

CodeSystems, Inc.

36Month Limited Warranty

Code Systems, Inc. (the “Company”) warrants to the original purchaser of this product that should this

productoranypartthereof, under normaluse and conditions,be proven defectivein material orworkman-

shipwithin36 months from thedateof original purchase,suchdefect(s) will be repairedorreplaced with

neworreconditioned product, (atthe Company’soption)withoutcharge for partsor repairlabor.

To obtain repair or replacement within the terms of this Warranty, the product is to be delivered with proof

ofwarranty coverage (e.g.dated bill ofsale),authorization number,specificationof defect(s),transportation

prepaid,toan approved warrantystation. This Warranty isnottransferable.

This Warranty does not cover damage to the vehicle’s electrical system or costs incurred for the installa-

tion or reinstallation of the product. This Warranty does not cover batteries nor apply to any product or

partthereofwhich,in the opinionof the Company, hassufferedorbeen damagedthroughalteration,

improperinstallation,mishandling, misuse, abuse,neglect,accident, or by removalor defacement of the

factoryserial number/bar codelabel(s).

This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, IN-

CLUDINGANYIMPLIEDWARRANTYOF MERCHANTABILITY,SHALLBELIMITEDTOTHE DURATION

OFTHISWRITTENWARRANTY. ANYACTIONFOR BREACHOFANY WARRANTYHEREUNDER

INCLUDINGANYIMPLIEDWARRANTYOFMERCHANTABILITYMUSTBE BROUGHTWITHINAPE-

RIODOF24 MONTHSFROMDATE OFORIGINALPURCHASE. IN NOCASESHALLTHECOMPANY

BELIABLE FORANYCONSEQUENTIALOR INCIDENTALDAMAGES FORBREACH OFTHIS ORANAY

OTHERWARRANTY. Noperson or representativeis authorized toassumefor the Companyany liability

other than expressed herein in connection with the sale of this product.

TheCompany does notwarrantthat thisproductcannot becompromisedor circumvented. THEEXTENT

OFTHECOMPANY’S LIABILITYUNDERTHISWARRANTYISLIMIEDTOTHEREPAIR ORREPLACE-

MENTPROVIDEDABOVEAND, INNOEVENT, SHALLTHE COMPANY’SLIABIILTYEXCEEDTHE

PURCHASEPRICE PAIDBYPURCHASERFORTHE PRODUCTWITHOUTCOSTOFINSTALLATION.

Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of

incidental or consequential damage so the above limitations or exclusions may not apply to you. This

Warranty gives you specific legal rights and you may also have other rights which vary from state to state.

CodeSystems, Inc., 525Minnesota Drive,Troy, Michigan 48083– 1-800-421-3209

FCC COMPLIANCE

This device complies with Part 15 of the FCC rules and with RSS-210 of Industry

Canada. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including any interference that

may cause undesired operation.

Warning!

Changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

Code Systems, Inc.

Customer Service 1-800-421-3209

WWW.CODE-ALARM.COM

Inhaltsverzeichnis

Andere Code Alarm Fernstartsystem Handbücher

Code Alarm

Code Alarm ca5554 Professional series Bedienungsanleitung

Code Alarm

Code Alarm Professional Series CA 5050 Bedienungsanleitung

Code Alarm

Code Alarm Professional Series CA 6550 Bedienungsanleitung

Code Alarm

Code Alarm Professional ca5054 Bedienungsanleitung

Code Alarm

Code Alarm CA 6150 Bedienungsanleitung

Code Alarm

Code Alarm PROFESSIONAL SERIES Bedienungsanleitung

Code Alarm

Code Alarm SRT 6700 Bedienungsanleitung

Code Alarm

Code Alarm PROFESSIONAL SERIES Bedienungsanleitung

Code Alarm

Code Alarm ca5154 professional Series Bedienungsanleitung

Code Alarm

Code Alarm CA-630 Bedienungsanleitung

Code Alarm

Code Alarm CA 2050 Bedienungsanleitung

Code Alarm

Code Alarm ca 1051 Bedienungsanleitung

Code Alarm

Code Alarm CA 5051 Bedienungsanleitung

Code Alarm

Code Alarm ca6554 Bedienungsanleitung

Code Alarm

Code Alarm PROFESSIONAL SERIES Bedienungsanleitung

Code Alarm

Code Alarm ca6554 Bedienungsanleitung

Code Alarm

Code Alarm ca 5152 Bedienungsanleitung

Code Alarm

Code Alarm Professional Series CA 4050 Bedienungsanleitung

Code Alarm

Code Alarm CA1BTW5 Bedienungsanleitung

Code Alarm

Code Alarm CA 5150 Bedienungsanleitung

Code Alarm

Code Alarm ca5354 Bedienungsanleitung

Code Alarm

Code Alarm CSM-3 Bedienungsanleitung

Code Alarm

Code Alarm Professional Series CA 4050 Bedienungsanleitung

Code Alarm

Code Alarm ca4053 Bedienungsanleitung

Beliebte Fernstartsystem Handbücher anderer Marken

AstroStart

AstroStart 803U Bedienungsanleitung

Durite

Durite 0-649-20 Handbuch

EINHELL

EINHELL BT-PS 1000 Handbuch

Linear

Linear ACCESS AK-21 Technische Daten

Soundstream

Soundstream TARANTULA RS.2 Bedienungsanleitung

Jaycar Electronics

Jaycar Electronics MB3752 Bedienungsanleitung

Ultra Start

Ultra Start 72 Series Bedienungsanleitung

ADS

ADS FLASHLOGIC FLRSVW1 Bedienungsanleitung

Selecta

Selecta JS012 Bedienungsanleitung

Black Widow Security

Black Widow Security BW RAS 400 Bedienungsanleitung

Vector

Vector Power City DK080706 Beilage

Ozito

Ozito OJS-800 Bedienungsanleitung

Profi-Partner

Profi-Partner 46387 Bedienungsanleitung

EZ STARTER

EZ STARTER EZ-45 Bedienungsanleitung

Viper

Viper 4204 Bedienungsanleitung

Essex Electronics

Essex Electronics KE-1701 Bedienungsanleitung

EINHELL

EINHELL EGS 3600 Handbuch

Rooboost

Rooboost RB-1750WP Bedienungsanleitung