CODELOCKS CL500 Bedienungsanleitung

24/9/2561 KA-01072 · Customer Self-Service

https://support.codelocks.com/knowledgebase/article/KA-01072/en-us 1/7

Home (/) > Knowledge Base - Home (/knowledgebase/) > KA-01072

CL500 - 2018 Code Change

Instructions

Many codes to choose from

The CL500 code chamber (CL500, CL510, CL520) consists of 11 buttons from which the code is selected,

and a ‘C’ button which is used to re-set the chamber after an incorrect entry, and which must always be

used as the first digit of a code. Buttons may only be used ONCE in a code. For example, 1212 is not

possible.

A CL500 code, or combination, can be entered in any order or sequence; e.g. 1234 can be 4321 or 1342 or

whatever sequence is most convenient to remember. With 11 buttons, a total of 2,047 different codes are

available, any of which can be entered in any sequence.

The total is arrived at as follows:



24/9/2561 KA-01072 · Customer Self-Service

https://support.codelocks.com/knowledgebase/article/KA-01072/en-us 2/7

Most people will set a code in the range of 4 to 7 digits, and the total number of codes in this range is

1,584.

The lock is factory set with a randomly selected 5 digit code starting with the C button. The code is not

recorded by the factory. The code can be changed as often as required to any other 5 digit code. Every new

code must start with the C button. Using the spare tumblers, the code length can be changed to 4 or 6

digits. Shorter codes are possible, but 1 or 2 digit codes are not recommended.

Note:CL505, CL515 and CL525 have 10 coded buttons giving 1,023 different codes.



Code Change Instructions

1.Take your CL500 lock off the door by unscrewing the 2 bolts in the back plate.

2. Press the C button to reset the chamber and place the lock case on a flat surface with the buttons down.

3. Remove the 4 red screws and carefully lift off the code chamber plate. Check that all 12 springs are held

in place on the plate.

4. Note that thecoloured code tumblers correspond in position to the existing code. Thesilver non-code

tumblers fill the other positions. The C tumbler is not coloured.

5.Hold the lock in your hand and depress the ‘C’ button. Keeping the ‘C’ button depressed use tweezers to

reposition the tumblers to correspond with your new code. The square notches of ALL tumblers MUST face

outwards, with the square tips ON TOP: See diagram below.

DO NOT force the tumblers in.

Note: Holding the C button depressed whilst removing or replacing the tumblers is ESSENTIAL to

avoid damaging the internal mechanism. DO NOT attempt to reposition the C tumbler.

24/9/2561 KA-01072 · Customer Self-Service

https://support.codelocks.com/knowledgebase/article/KA-01072/en-us 3/7

6. Replace the code chamber plate carefully with the 4 red screws.

7. Check the operation of the new code, and make a written note of it before reinstalling the lock.

8. (See below)



Maintenance

No maintenance of the working parts is necessary.DO NOT OIL.To maintain the finish the lock should be

cleaned regularly with a soft cloth. A silicone spray or similar should be used to provide a protective film

against grit and grime.

Guarantee

If any Codelocks mechanical lock should develop a fault, at any time due to manufacturing, just call the

Codelocks helpline and arrange for it to be repaired free of charge.



24/9/2561 KA-01072 · Customer Self-Service

https://support.codelocks.com/knowledgebase/article/KA-01072/en-us 4/7



24/9/2561 KA-01072 · Customer Self-Service

https://support.codelocks.com/knowledgebase/article/KA-01072/en-us 5/7

Features

• Code Free Access mode is available on locks CL505, CL515 and CL525. This is signified by a button with a

black dot.

• Inside handle always retracts the latch for exit.

• Weather resistant.

• Vandal resistant, with stainless steel buttons, and clutch protection if the outside handle is forced.

• Reversible handles.

• Fits doors between 35mm (1 ⁄") and 60mm (2⁄") thick without modification.



Back to back version only

• Two coded plates are provided to allow coded access in both directions.

• Butterfly spindle not required.

• For doors hung on the right, fit the silver spindle in the front keypad and the coloured spindle in the

opposite side.

• For doors hung on the left, fit the coloured spindle in the front keypad and the silver spindle in the

opposite side.



CL520/CL525 ONLY

• Split follower lock enables inside handle to retract latch and deadbolt simultaneously, satisfying ‘means of

escape’ requirements for exit at all times. Prevents accidental lock-ins.

• Deadbolt thrown by key to lock out code users after work hours.

• Key will retract the latchbolt giving access for admin functions.

• Double euro profile cylinder with 3 keys.

• Any euro profile cylinder may be used.

• On multiple door installations consideration should be given to having all cylinders keyed alike, with

restricted key issue, for ease of management.



Models

24/9/2561 KA-01072 · Customer Self-Service

https://support.codelocks.com/knowledgebase/article/KA-01072/en-us 6/7



CC-CL500-v1:0218



24/9/2561 KA-01072 · Customer Self-Service

https://support.codelocks.com/knowledgebase/article/KA-01072/en-us 7/7

Keywords: Lock Locks Code CodeLock CodeLocks Program Programming Instruction Instruct Help

Support Troubleshoot Troubleshooting Sequence Sequences Install Installation Parameters Settings

Setting Parameter Setting Set up Mechanical CL 500 CL500

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere CODELOCKS Sperren Handbücher

CODELOCKS

CODELOCKS CL600 Bedienungsanleitung

CODELOCKS

CODELOCKS CL4500 Bedienungsanleitung

CODELOCKS

CODELOCKS CL500 Bedienungs- und Wartungsanleitung

CODELOCKS

CODELOCKS 4000 Series Bedienungsanleitung

CODELOCKS

CODELOCKS CL50 Bedienungsanleitung

CODELOCKS

CODELOCKS CL2000 Bedienungsanleitung

CODELOCKS

CODELOCKS CL5020 Bedienungsanleitung

CODELOCKS

CODELOCKS Pushbutton 500 Series Kurzanleitung

CODELOCKS

CODELOCKS KL1050 Bedienungsanleitung

CODELOCKS

CODELOCKS CL5500 SERIES Bedienungsanleitung

CODELOCKS

CODELOCKS CL300 Bedienungsanleitung

CODELOCKS

CODELOCKS KitLock Slam Latch Bedienungsanleitung

CODELOCKS

CODELOCKS Kit-Lock KL1100 Bedienungsanleitung

CODELOCKS

CODELOCKS Kit-Lock KL1100 Bedienungsanleitung

CODELOCKS

CODELOCKS CL5500 SERIES Bedienungsanleitung

CODELOCKS

CODELOCKS CL5500 SERIES Bedienungsanleitung

CODELOCKS

CODELOCKS CL4510 Bedienungsanleitung

CODELOCKS

CODELOCKS NANO90 Bedienungsanleitung

CODELOCKS

CODELOCKS CL1000 Bedienungsanleitung

CODELOCKS

CODELOCKS KL1050 C2 Bedienungsanleitung

CODELOCKS

CODELOCKS CL1200 Bedienungsanleitung

CODELOCKS

CODELOCKS CL4510 Bedienungsanleitung

CODELOCKS

CODELOCKS KL1000 G3 NetCode Bedienungsanleitung

CODELOCKS

CODELOCKS CL210 Bedienungsanleitung

Beliebte Sperren Handbücher anderer Marken

Magic

Magic 105 Bedienungsanleitung

Gantner

Gantner GAT NET.Lock 7020 System Kurzanleitung

Wittkopp

Wittkopp Insys 7202 Bedienungsanleitung

Dorma

Dorma Studio Classic Bedienungsanleitung

Securam

Securam ECSL-601 Bedienungsanleitung

Sudhaus

Sudhaus 3003 Bedienungsanleitung

Safety 1st

Safety 1st 48517 Bedienungsanleitung

Pado

Pado FDS-10 Bedienungsanleitung

Esco

Esco systeQ Series Bedienungsanleitung

COMPX

COMPX National D8951 Bedienungsanleitung

secureo

secureo Key Box Bedienungsanleitung

Stock Loks

Stock Loks C8713 Bedienungsanleitung

COMPX

COMPX 1T-058 Betriebsanleitung

Auslock

Auslock T11 Bedienungsanleitung

ELCOM

ELCOM 7205 Bedienungsanleitung

Stealth SAFES

Stealth SAFES ShadowVault Bedienungsanleitung

Knox

Knox KeySecure 5 Bedienungsanleitung

Kwikset

Kwikset 48334/01 Bedienungsanleitung