Cognex DataMan 8600 Series Bedienungsanleitung

DataMan®8600

Quick Reference Guide

2020 June 24

Revision: 6.2.0.2

Precautions

WARNING: LASER LIGHT, DO NOT STARE INTO BEAM: CLASS 2

LASER PRODUCT. FAILURE TO FOLLOW THESE INSTRUCTIONS

MAY CAUSE SERIOUS INJURY.

To reduce the risk of injury or equipment damage, observe the following precautions

when you install the Cognex product:

lThis product is intended for industrial use in automated manufacturing or

similar applications.

lThe safety of any system incorporating this product is the responsibility of

the assembler of the system.

lThis product does not contain user-serviceable parts. Do not make

electrical or mechanical modifications to product components.

Unauthorized modifications can void your warranty.

lRoute cables and wires away from high-current wiring or high-voltage

power sources to reduce the risk of damage or malfunction from the

following causes: over-voltage, line noise, electrostatic discharge (ESD),

power surges, or other irregularities in the power supply.

lChanges or modifications not expressly approved by the party responsible

for regulatory compliance could void the user’s authority to operate the

equipment.

lEnsure that the cable bend radius begins at least six inches from the

connector. Cable shielding can be degraded or cables can be damaged or

wear out faster if a service loop or bend radius is tighter than 10X the cable

diameter.

lThis device should be used in accordance with the instructions in this

manual.

lAll specifications are for reference purposes only and can change without

notice.

Product Overview

DataMan 8600 Reader

WARNING:LASER LIGHT, DO NOT STARE INTO BEAM

1 UltraLight

2 Laser aimer

3 Trigger (press and hold to read)

4 Communication module insertion point

5 Indicator light

6 Lanyard hook

7 Extended Read Attempts button (acts as an optical button to arm the

reader for predefined actions)

8 RS-232 connection

9 USB connection

10 Power plug (24V, max. 15W)

11 Alternative power supply connector (24V, max. 15W, polarity marked on

the plastic part near the connector)

12 Ethernet connection

DataMan 8600 Accessories

Accessory Name Product ID Illustration

Serial/USB slide-in DMCM-SERIALM-00

Ethernet slide-in DMCM-ENETM-00

Bluetooth slide-in DMCM-BTM-00

Wireless slide-in DMCM-WLESSM-00

Charging base station DMA-CBASE-01

Intelligent base station DMA-IBASE-01

Intelligent Bluetooth base station DMA-IBASE-BT-01

Intelligent Bluetooth base station DMA-IBASE-BT-02

Power Supply for base station DMA-24VPWR-xx*

Power Supply for reader DM100-PWR-000

Battery for the wireless reader DMA-HHBATTERY-01

Multi-battery charger DMA-MBC-xx*

POE adapter CPS-24V-POE1

POE adapter CPS-24V-POE4

POE adapter CPS-AC-POE1A-xx*

Wall mount for base station DMA-IBASE-WALL-00

Stand DM-STAND-00

Rubber sleeve DM8600-SLEEVE-00

*xx can be US, EN, UK, or JP.

Lens Options and Covers

6.2 mm lens kit DM150-LENS-62

Clear lens cover DM150-CVR-CLR

Clear lens cover,ESD safe* DM150-CVR-ESD

Polarized front cover DM260-LENS-62CVR-F

Red LED illumination (Risk Group Exempt acc. IEC 62471)

White LED illumination (Risk Group Exempt acc. IEC 62471)

Blue LED illumination (Risk Group Exempt acc. IEC 62471)

DM150-LED-RED

DM150-LED-WHT

DM150-LED-BLU

High Powered red LED illumination DM260-LED-RED-HP

Cables

Accesory Name Product ID Illustration

Coiled RS-232 cable for reader, 2.5 m DM8000-RS232-02

Industrial RS-232 cable for reader, 2.5 m DM8000-RS232IND-02

Coiled RS-232 cable for reader, 4 m DM8000-RS232-05

Coiled USB cable, 2.5 m DM8500-USBC-02

Ethernet cable, 2.5 m DM8000-ECABLE-02

Ethernet cable, 30 m DM8000-ECABLE-30

Ethernet cable, 5 m DM8000-ECABLE-05

USB cable, 2.5 m DM8500-USB-00

Coiled Ethernet cable, 5m DM8000-ECABLEC-05**

Coiled Ethernet cable with X-coded M12 connector, 5m DM8000-ECABLEC-M12

RJ25 (RJ12) to DSUB9 cable for base station, 5 m DMA-RS232RJ-05

** Collimated cable length including DM8000-ECABLE-X should not

exceed 50 m.

lUSB cable for base station: Use any standard USB-A to USB-B

2.0 cable up to 3 meters.

lEthernet cable for base station: Use any standard CAT5/5e,

SF/FTP or S/FTP cable.

lDMA-USB-00: Straight 10ft USB cable.

Field of View and Reading Distances

Depth of Field values

Note: All values beginning with 0 denote the minimum distance where the

Field of View is able to see the entire code.

Note: The calibration distance is 143.0 mm from the nose of the lens, and the calibration tolerance is +/- 5

mm.

Connecting the Reader

Wireless Readers

1. Connect the slide-in to the reader and tighten the screws to lock the slide-in.

2. Insert the battery.

3. Insert the plug.

Corded Readers

1. Connect the slide-in to the reader and tighten the screws to lock the slide-in.

2. Insert the plug. Slide the cable lock up to the reader and twist the cable lock

in place.

Note: Disconnect the DataMan 8600 from powerbefore inserting the communication modules.

Installation

Installation procedures are detailed in the DataMan 8600 Reference Manual, which

is installed with the DataMan Setup Tool. From the Windows Start menu, select the

following to access the manual: All Programs > Cognex > DataMan Software vx.x.x >

Documentation.

Note:

lCables are sold separately.

lIf a standard component is missing or damaged, immediately contact

your Cognex Authorized Service Provider (ASP) or Cognex

Technical Support.

CAUTION:All cable connectors are "keyed" to fit the connectors on the

DataMan system; do not force the connectors or damage may occur.

Install Software, Documentation and

Connect the Reader

To configure a DataMan 8600 reader, the DataMan Setup Tool software must be

installed on a PC on the network. The DataMan Setup Tool is available from the

DataMan support site: cognex.com/support/dataman.

1. After installing the software, connect the DataMan 8600 to your PC.

2. Launch the DataMan Setup Tool and click Refresh.

3. Select your DataMan 8600 reader from the list and click Connect.

Andere Handbücher für DataMan 8600 Series

Inhaltsverzeichnis

Andere Cognex Barcode-Lesegerät Handbücher

Cognex

Cognex DataMan 8000 Series Bedienungsanleitung

Cognex

Cognex DataMan 8050 Bedienungsanleitung

Cognex

Cognex DataMan 150 Series Bedienungsanleitung

Cognex

Cognex In-Sight SnAPP Series Bedienungsanleitung

Cognex

Cognex DataMan 470 Series Bedienungsanleitung

Cognex

Cognex DM 8072DL Bedienungsanleitung

Cognex

Cognex DataMan 302L Bedienungsanleitung

Cognex

Cognex DataMan 260 Series Bedienungsanleitung

Cognex

Cognex DataMan 280 Series Bedienungsanleitung

Cognex

Cognex DataMan 8072 ER Bedienungsanleitung

Cognex

Cognex VisionPro Trevista CI Dome Bedienungsanleitung

Cognex

Cognex DataMan 8700 Bedienungsanleitung

Cognex

Cognex Advantage 182 Series Montageanleitung

Cognex

Cognex DataMan 8072 DL Bedienungsanleitung

Cognex

Cognex DataMan 700 series Bedienungsanleitung

Cognex

Cognex DataMan DM474 Bedienungsanleitung

Cognex

Cognex DataMan 503 Bedienungsanleitung

Cognex

Cognex DataMan 380 Series Bedienungsanleitung

Cognex

Cognex DataMan 503 Bedienungsanleitung

Cognex

Cognex DM503 Bedienungsanleitung

Cognex

Cognex DataMan 300 Series Bedienungsanleitung

Cognex

Cognex DataMan 475 Bedienungsanleitung

Cognex

Cognex DataMan 475 Bedienungsanleitung

Cognex

Cognex DataMan 470 Series Bedienungsanleitung

Beliebte Barcode-Lesegerät Handbücher anderer Marken

POSMicro

POSMicro Datalogic PowerScan D7100 Bedienungsanleitung

Marson

Marson MT780 Kurzanleitung zur Einrichtung

NCR

NCR RealPOS Bedienungsanleitung

Motorola

Motorola SE3300 Kurzanleitung zur Einrichtung

Element

Element P130BT Bedienungsanleitung

Motorola

Motorola Symbol LS3008 Installations- und Betriebshandbuch

Meec tools

Meec tools OBD-II / VAG Bedienungsanleitung

SICK

SICK CLP 100 Bedienungsanleitung

Royal Tag SA

Royal Tag SA I-Read Bedienungsanleitung

Welch Allyn

Welch Allyn IMAGETEAM 3800 Bedienungsanleitung

Meteor

Meteor 8310 Bedienungsanleitung

Denso

Denso BHT-500B Bedienungsanleitung

Datalogic

Datalogic Heron HD3130 Bedienungsanleitung

Motorola

Motorola MP6000 Montageanleitung

Newland

Newland NLS-HR15-BT Bedienungsanleitung

ARTDEV

ARTDEV AS-1310 Bedienungsanleitung

Aopos

Aopos AS290 Bedienungsanleitung

ENS

ENS 367-5455 Bedienungsanleitung