Cognex DataMan 280 Series Bedienungsanleitung

DataMan®280 Series

Reference Manual

2022 February 21

Revision: 6.3.1.51

Legal Notices

The software described in this document is furnished under license, and may be used or copied only in accordance with

the terms of such license and with the inclusion of the copyright notice shown on this page. Neither the software, this

document, nor any copies thereof may be provided to, or otherwise made available to, anyone other than the licensee.

Title to, and ownership of, this software remains with Cognex Corporation or its licensor. Cognex Corporation assumes

no responsibility for the use or reliability of its software on equipment that is not supplied by Cognex Corporation.

Cognex Corporation makes no warranties, either express or implied, regarding the described software, its

merchantability, non-infringement or its fitness for any particular purpose.

The information in this document is subject to change without notice and should not be construed as a commitment by

Cognex Corporation. Cognex Corporation is not responsible for any errors that may be present in either this document or

the associated software.

Companies, names, and data used in examples herein are fictitious unless otherwise noted. No part of this document

may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, nor

transferred to any other media or language without the written permission of Cognex Corporation.

Portions of the hardware and software provided by Cognex may be covered by one or more U.S. and foreign patents, as

well as pending U.S. and foreign patents listed on the Cognex web site at: cognex.com/patents.

The following are registered trademarks of Cognex Corporation:

Cognex, 2DMAX, Advantage, AlignPlus, Assemblyplus, CheckitwithChecker, Checker, CognexVisionforIndustry,

CognexVSOC, CVL, DataMan, DisplayInspect, DVT, EasyBuilder, Hotbars, IDMax, In-Sight, LaserKiller, MVS-8000,

OmniView, PatFind, PatFlex, PatInspect, PatMax, PatQuick, SensorView, SmartView, SmartAdvisor, SmartLearn,

UltraLight, VisionSolutions, VisionPro, VisionView

The following are trademarks of Cognex Corporation:

The Cognex logo, 1DMax, 3D-Locate, 3DMax, BGAII, CheckPoint, CognexVSoC, CVC-1000, FFD, iLearn, In-Sight

(design insignia with cross-hairs), In-Sight2000, InspectEdge, Inspection Designer, MVS, NotchMax, OCRMax,

PatMaxRedLine, ProofRead, SmartSync, ProfilePlus, SmartDisplay, SmartSystem, SMD4, VisiFlex, Xpand

Other product and company trademarks identified herein are the trademarks of their respective owners.

Legal Notices

Precautions

To reduce the risk of injury or equipment damage, observe the following precautions when you install the Cognex

product:

lConnectivity is possible through the following options:

l24 VDC (+/- 10%) output connection using a UL or NTRL listed power supply

lPower over Ethernet (PoE) 13 W power supply

Any other voltage creates a risk of fire or shock and can damage the components. Applicable national and local

wiring standards and rules must be followed.

lThis product is intended for industrial use in automated manufacturing or similar applications.

lThe safety of any system incorporating this product is the responsibility of the assembler of the system.

lDo not install Cognex products where they are exposed to environmental hazards such as excessive heat, dust,

moisture, humidity, impact, vibration, corrosive substances, flammable substances, or static electricity.

lRoute cables and wires away from high-current wiring or high-voltage power sources to reduce the risk of

damage or malfunction from the following causes: over-voltage, line noise, electrostatic discharge (ESD), power

surges, or other irregularities in the power supply.

lDo not expose the image sensor to laser light. Image sensors can be damaged by direct, or reflected, laser light.

If your application requires laser light that might strike the image sensor, use a lens filter at the corresponding

laser wavelength. For suggestions, contact your local integrator or application engineer.

lThis product does not contain user-serviceable parts. Do not make electrical or mechanical modifications to

product components. Unauthorized modifications can void your warranty.

lChanges or modifications not expressly approved by the party responsible for regulatory compliance could void

the user’s authority to operate the equipment.

lInclude service loops with cable connections.

lEnsure that the cable bend radius begins at least six inches from the connector. Cable shielding can be

degraded or cables can be damaged or wear out faster if a service loop or bend radius is tighter than 10X the

cable diameter.

lThis device should be used in accordance with the instructions in this manual.

lAll specifications are for reference purposes only and can change without notice.

Precautions

Symbols

The following symbols indicate safety precautions and supplemental information:

WARNING:This symbol indicates a hazard that could cause death, serious personal injury or electrical shock.

CAUTION:This symbol indicates a hazard that could result in property damage.

Note: This symbol indicates additional information about a subject.

Tip: This symbol indicates suggestions and shortcuts that might not otherwise be apparent.

Symbols

Table of Contents

Legal Notices 2

Precautions 3

Symbols 4

Table of Contents 5

Getting Started 7

About the DataMan 280 Series 7

Supporting Documentation 8

Accessories 9

Lenses 9

Lens Covers and Internal Illumination 10

Mounting Brackets 12

Cables 13

DataMan 280 Systems 14

Illumination Options 14

Setting Up Your DataMan Reader 16

Reader Layout 16

Indicator LEDs 17

Dimensions 18

DataMan 280 with 6.2 mm Lens 18

DataMan 280 with 16 mm Lens 19

DataMan 280 with L-shaped extension, equipped with 6.2 mm lens 19

DataMan 280 with L-shaped extension, equipped with 16 mm lens 20

Field of View and Reading Distance 21

DataMan 280 readers with a 6.2 mm lens 21

DataMan 280 readers with a 16 mm lens 22

Installing and Changing Lenses 24

Installing a C-Mount Lens 24

Changing a 6.2 mm Lens to a 16 mm Lens 28

Installing a High Speed Liquid Lens 32

Mounting the Reader 35

Setting Focus 36

Manual Focus Lens 37

Focus Feedback 37

Best Practices 38

Connection options 38

Connecting the Ethernet Cable 38

Connecting the Power and I/OBreakout Cable 39

Using your device through USB 39

Using Your DataMan Reader 42

Installing the DataMan Setup Tool 42

Trigger Types 42

External Triggers 43

Training the Reader 43

Table of Contents

Manual Training 44

Training Feedback 45

Incremental Training for Multiple Symbologies 45

Industrial Protocols 47

Specifications 48

DataMan 280 Series Reader 48

DataMan 280 Series Reader Image Sensor 49

Acquisition Trigger Input 49

High-Speed Outputs 51

High Speed Output Wiring 52

Ethernet Cable 53

Power and I/O Breakout Cable (CCB-M12x12Fy-xx) 54

Power and I/O Breakout Cable (CCBL-05-01) 55

Power and I/O Breakout Cable (CCB-PWRIO-05) 56

Cleaning and Maintenance 57

Clean the Housing 57

Clean the Reader Image Sensor Window 57

Clean the Reader Lens Cover 57

Regulations and Conformity 58

中国大陆RoHS (Information for China RoHS Compliance) 59

For European Community Users 59

Table of Contents

Getting Started

This section provides general information about the DataMan 280 series reader and the accessories and systems.

About the DataMan 280 Series

The DataMan 280 series readers are high-performance readers that offer:

lPremium class performance in a compact package

lFlexible Industry 4.0 connectivity options

lUnmatched Modularity and Ease of Use

Getting Started

Supporting Documentation

This document provides basic information about the DataMan 280 series readers. Additional information is available

through the Windows Start menu or the DataMan Setup Tool Help menu after you install the DataMan software on your

PC.

Note: For the latest documentation, visit: support.cognex.com/documentation/dataman.

lThe DataMan Communications and Programming Guide shows you how to integrate your DataMan reader into

your particular automation and factory environment.

Cognex > DataMan Software Revision: x.x.x> Documentation > Communications > DataMan Communications

and Programming Guide

lThe DataMan Industrial Protocols Manual provides information on how to integrate DataMan readers into your

particular environment using industrial protocols.

Cognex > DataMan Software Revision: x.x.x> Documentation > Communications > DataMan Industrial Protocols

Manual

lThe DataMan Reader Configuration Codes document provides printable 2-D codes that you can use to

configure the DataMan reader.

Cognex > DataMan Software Revision: x.x.x > Documentation > English > Reader Configuration Codes

lThe DM280 Quick Reference Guide provides essential information about the DM280 reader.

Cognex > DataMan SoftwareRevision: x.x.x > Documentation > English > DM280 Series > DM280 Quick

Reference Guide

lThe DataMan Fixed-Mount Readers Reference is a complete online hardware reference for the DataMan fixed-

mount ID readers.

Cognex > DataMan Software Revision: x.x.x > Documentation > English > DM280 > Fixed-Mount Reference

Manual

lThe DataMan Questions and Answers document provides context-sensitive information. You can view this help

inside the DataMan Setup Tool or as a stand-alone help file.

Cognex > DataMan Software Revision: x.x.x > Documentation > DM280 > Questions and Answers

lThe DataMan Control Commands lists DataMan Control Commands with all relevant information. You can view

this help inside the Setup Tool or as a stand-alone help file.

Cognex > DataMan Software Revision: x.x.x > Documentation > English > DataMan Control Commands

lThe Setup Tool Reference Manual describes the user interface of the DataMan Setup Tool software.

Cognex > DataMan Software Revision: x.x.x> Documentation > English > Setup Tool Reference Manual

lThe Release Notes list detailed system requirements and additional information about the DataMan software

release.

Cognex > DataMan Software Revision: x.x.x > Documentation > DataMan Revision: x.x.x > Release Notes

Getting Started

Accessories

You can purchase the following components separately. For a list of options and accessories, contact your local Cognex

sales representative.

Lenses

Accessory Product Number Illustration

6.2 mm lens kit that includes:

l6.2 mm optics mount

l6.2 mm lens

lManual lens cap (assembled)

lScrews

DM280-LENS-62

16 mm lens kit with extended optics mount (requires the use of an extended front

cover and high-powered red LED). The kit includes:

l16 mm optics mount

l16 mm lens

lManual lens cap (assembled)

lScrews

DM260-LENS-16

IR 6.2 mm lens kit, 3-position with IR LED includes:

l6.2 mm optics mount

l6.2 mm lens (IR)

lIR Light for 6.2mm (Risk Group Exempt acc. IEC62471)

lManual lens cap (not assembled)

lScrews

DM280-KIT-IR-62

IR16 mm lens kit that includes:

l16 mm optics mount

l16 mm lens (IR)

lIR Light for 16mm (Risk Group Exempt acc. IEC62471)

lManual lens cap (assembled)

lScrews

DMA-KIT-IR-16

High Speed Liquid Lens Module (HSLL) to be used with 6.2 mm lens or 16 mm lens DMA-HSLL-280

Getting Started

Accessory Product Number Illustration

16 mm lens with ImageMax kit that includes:

l16 mm optics mount

l16 mm lens

lHigh Speed Liquid Lens Module (DMA-HSLL-280)

lHigh Powered red LED illumination (DM280-LED-RED-HP) (Risk Group

Exempt acc. IEC62471)

l2-LED half-polarized extended cover (DM260-LENS-16CVR-P) (Risk Group

Exempt acc. IEC62471)

DM280-KIT-IMGMAX

Blue bandpass filter DM150-BP470

Red bandpass filter DM150-BP635

Lens Covers and Internal Illumination

Accessory Product Number Illustration

Red LED Light for 6.2 mm Lens (Risk Group Exempt acc. IEC 62471) DM150-LED-RED

White LED Light for 6.2 mm Lens (Risk Group Exempt acc. IEC 62471) DM150-LED-WHT

Blue LED Light for 6.2 mm Lens (Risk Group Exempt acc. IEC 62471) DM150-LED-BLU

High-Powered Red LED Light for 16 mm Lens (Risk Group Exempt acc. IEC

62471)*

DM280-LED-RED-HP

High-Powered White LED Light for 16 mm Lens (Risk Group Exempt acc. IEC

62471)*

DM280-LED-WHT-HP

Front cover. Use with a 6.2 mm lens only. DM280-CVR-62

Polarized front cover. Use with a 6.2 mm lens only. DM280-LENS-62CVR-

Half-Polarized front cover. Use with a 6.2 mm lens only. DM280-LENS-62CVR-

Extended front cover. Use with a 16 mm lens only. DM260-LENS-16CVR

Extended front cover, half-polarized. Use with a 16 mm lens only. DM260-LENS-16CVR-

Extended front cover, fully-polarized.Use with a 16 mm lens only. DM260-LENS-16CVR-

C-mount adapter, IP40 DM280-CMNT-00

C-mount cover, IP65 DM280-CMNT-CVR

Getting Started

Andere Handbücher für DataMan 280 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Cognex Barcode-Lesegerät Handbücher

Cognex

Cognex DataMan 300 Series Bedienungsanleitung

Cognex

Cognex DataMan 70 Bedienungsanleitung

Cognex

Cognex DataMan 150 Series Bedienungsanleitung

Cognex

Cognex DataMan 300 Series Bedienungsanleitung

Cognex

Cognex Advantage 182 Series Montageanleitung

Cognex

Cognex DM 8072DL Bedienungsanleitung

Cognex

Cognex DataMan 7550 Bedienungsanleitung

Cognex

Cognex DataMan 503 Bedienungsanleitung

Cognex

Cognex DataMan 60 Series Bedienungsanleitung

Cognex

Cognex DataMan 370 Series Bedienungsanleitung

Cognex

Cognex DataMan 8700 Bedienungsanleitung

Cognex

Cognex DataMan 360 Series Bedienungsanleitung

Cognex

Cognex DataMan 380 Series Bedienungsanleitung

Cognex

Cognex DataMan 8072 DL Bedienungsanleitung

Cognex

Cognex DataMan 470 Series Bedienungsanleitung

Cognex

Cognex DataMan 50 Series Bedienungsanleitung

Cognex

Cognex DataMan 8700 DX Bedienungsanleitung

Cognex

Cognex DataMan 260 Bedienungsanleitung

Cognex

Cognex DataMan 260 Series Bedienungsanleitung

Cognex

Cognex In-Sight 2800 Series Bedienungsanleitung

Cognex

Cognex DataMan 8072 Bedienungsanleitung

Cognex

Cognex DataMan 475 Bedienungsanleitung

Cognex

Cognex DataMan 470 Series Bedienungsanleitung

Cognex

Cognex DataMan 8600 Series Bedienungsanleitung

Beliebte Barcode-Lesegerät Handbücher anderer Marken

POSMicro

POSMicro Datalogic PowerScan D7100 Bedienungsanleitung

Marson

Marson MT780 Kurzanleitung zur Einrichtung

NCR

NCR RealPOS Bedienungsanleitung

Motorola

Motorola SE3300 Kurzanleitung zur Einrichtung

Element

Element P130BT Bedienungsanleitung

Motorola

Motorola Symbol LS3008 Installations- und Betriebshandbuch

Meec tools

Meec tools OBD-II / VAG Bedienungsanleitung

SICK

SICK CLP 100 Bedienungsanleitung

Royal Tag SA

Royal Tag SA I-Read Bedienungsanleitung

Welch Allyn

Welch Allyn IMAGETEAM 3800 Bedienungsanleitung

Meteor

Meteor 8310 Bedienungsanleitung

Denso

Denso BHT-500B Bedienungsanleitung

Datalogic

Datalogic Heron HD3130 Bedienungsanleitung

Motorola

Motorola MP6000 Montageanleitung

Newland

Newland NLS-HR15-BT Bedienungsanleitung

ARTDEV

ARTDEV AS-1310 Bedienungsanleitung

Aopos

Aopos AS290 Bedienungsanleitung

ENS

ENS 367-5455 Bedienungsanleitung