Cognex DataMan 302L Bedienungsanleitung

DataMan®300 Series

Reference Manual

2021 January 29

Legal Notices

The software described in this document is furnished under license, and may be used or copied only in accordance with

the terms of such license and with the inclusion of the copyright notice shown on this page. Neither the software, this

document, nor any copies thereof may be provided to, or otherwise made available to, anyone other than the licensee.

Title to, and ownership of, this software remains with Cognex Corporation or its licensor. Cognex Corporation assumes

no responsibility for the use or reliability of its software on equipment that is not supplied by Cognex Corporation.

Cognex Corporation makes no warranties, either express or implied, regarding the described software, its

merchantability, non-infringement or its fitness for any particular purpose.

The information in this document is subject to change without notice and should not be construed as a commitment by

Cognex Corporation. Cognex Corporation is not responsible for any errors that may be present in either this document or

the associated software.

Companies, names, and data used in examples herein are fictitious unless otherwise noted. No part of this document

may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, nor

transferred to any other media or language without the written permission of Cognex Corporation.

Portions of the hardware and software provided by Cognex may be covered by one or more U.S. and foreign patents, as

well as pending U.S. and foreign patents listed on the Cognex web site at: cognex.com/patents.

The following are registered trademarks of Cognex Corporation:

Cognex, 2DMAX, Advantage, AlignPlus, Assemblyplus, CheckitwithChecker, Checker, CognexVisionforIndustry,

CognexVSOC, CVL, DataMan, DisplayInspect, DVT, EasyBuilder, Hotbars, IDMax, In-Sight, LaserKiller, MVS-8000,

OmniView, PatFind, PatFlex, PatInspect, PatMax, PatQuick, SensorView, SmartView, SmartAdvisor, SmartLearn,

UltraLight, VisionSolutions, VisionPro, VisionView

The following are trademarks of Cognex Corporation:

The Cognex logo, 1DMax, 3D-Locate, 3DMax, BGAII, CheckPoint, CognexVSoC, CVC-1000, FFD, iLearn, In-Sight

(design insignia with cross-hairs), In-Sight2000, InspectEdge, Inspection Designer, MVS, NotchMax, OCRMax,

PatMaxRedLine, ProofRead, SmartSync, ProfilePlus, SmartDisplay, SmartSystem, SMD4, VisiFlex, Xpand

Other product and company trademarks identified herein are the trademarks of their respective owners.

Legal Notices

Table of Contents

Legal Notices 2

Table of Contents 3

Symbols 5

Getting Started 6

About the DataMan 300 Reader 6

Configuration 6

DataMan 300 Series Accessories 7

Lens Options 7

Lens Covers 8

External Lights (Red LED) 9

Laser Aimers 10

High Power Illumination Accessories 10

Cables 10

Power Supplies 11

Mounting Brackets 11

DataMan 300 Systems 12

Setting Up Your DataMan 300 Reader 13

Reader Layout 13

Dimensions 14

Installing the Lens 16

Installing an M12 Lens with Manual Focus 16

Installing a Liquid Lens 18

Installing the 24 mm Liquid Lens Module with DM360-HPIL-RE-01 or DM360-HPIL-RE-P-01 20

Installing a C-Mount Lens 23

Installing a Filter 26

External Light Mounting Brackets 30

Setting Focus 32

Liquid Lens 32

Manual Focus Lens 34

Focus Feedback 34

Best Practices 35

Field of View and Reading Distances 36

Reading Distance and Field of View (DataMan 300 Readers with a 10.3 mm Liquid Lens) 36

Reading Distance and Field of View (DataMan 300 Readers with a 16 mm Lens) 37

Reading Distance and Field of View (DataMan 300 Readers with a 19 mm Lens with a Liquid Lens) 38

Reading Distance and Field of View (DataMan 300 Readers with a 24 mm Lens with Liquid Lens) 39

Reading Distance and Field of View (DataMan 300 Readers with a 25 mm Lens) 40

DataMan 300 Series Specifications 42

DataMan 300 Series Imager Specifications 43

LED Wavelengths 43

Illumination Options 44

Using Your DataMan 300 Reader 45

Installing DataMan Software and Connecting the Reader 45

Troubleshooting an Ethernet Connection 45

Industrial Protocols 46

Table of Contents

DataMan 300 Series Triggering 46

External Triggers 48

DataMan 300 Series Multi-Reader Sync Option 49

DataMan 300 Series Tuning 50

DataMan 300 Series Image Filtering 52

Training the Reader 53

Training Feedback 53

Incremental Training for Multiple Symbologies 54

Package Detection Support 54

Connections, Optics, and Lighting 56

External Light Control (CCB-M12XFLY-05) 56

5 m Breakout Cable (CCBL-05-01) 57

5m Breakout Cable (CCB-M12x12Fy-xx) 58

15m Breakout Cable (CCB-PWRIO-15) 59

High-Speed Outputs 60

High-Speed Output Wiring 61

5m RS-232 Connection Cable (CCB-M12XDB9Y-05) 62

Ethernet M12 to RJ45 Cable (CCB-84901-y00x-xx) 63

Acquisition Trigger 63

Connecting the Encoder to a DataMan Reader 64

Multi-Port Connections 64

Cleaning and Maintenance 67

Cleaning the Reader Housing 67

Cleaning the Reader Lens Cover 67

Compliance Information, Warnings and Notices 68

Precautions 68

Regulations/Conformity 68

Laser Safety Statement 69

LED Safety Statement 69

For European Community Users 69

Reader Programming Codes 70

Table of Contents

Symbols

The following symbols indicate safety precautions and supplemental information:

WARNING:This symbol indicates a hazard that could cause death, serious personal injury or electrical shock.

CAUTION:This symbol indicates a hazard that could result in property damage.

Note: This symbol indicates additional information about a subject.

Tip: This symbol indicates suggestions and shortcuts that might not otherwise be apparent.

Symbols

Getting Started

This section provides general information about the DataMan 300 series reader and the DataMan 300 accessories and

systems.

About the DataMan 300 Reader

The DataMan 300 series readers are high-performance, fixed-mount ID readers that offer:

lHighest Read Rates on 1-D and 2-D codes

lMost flexible optics and lighting

lIntelligent tuning and express setup

The DataMan 300 series readers provide advanced Ethernet connectivity, support for serial RS-232 and discrete I/O,

and advanced options for lighting and optics.

The DataMan 300 series readers are packaged in a rugged, IP65-rated housing, and provide numerous ease-of-use

features, including one button to trigger and one to start tuning.

Configuration

This document provides basic information about the DataMan 300 series readers. Additional information is available

through the Windows Start menu or the DataMan Setup Tool Help menu after you install the DataMan software on your

PC:

lThe DataMan Communications and Programming Guide shows you how to integrate your DataMan reader into

your particular automation and factory environment.

Cognex->DataMan Software v x.x.x->Documentation->Communications->DataMan Communications and

Programming Guide

lThe DataMan Industrial Protocols Manual provides information on how to integrate DataMan readers into your

particular environment using industrial protocols.

Cognex->DataMan Software v x.x.x->Documentation->Communications->DataMan Industrial Protocols Manual

lThe DataMan Reader Configuration Codes document provides printable 2-D codes that you can use to

configure the DataMan reader.

Cognex->DataMan Software v x.x.x->Documentation->English->Reader Configuration Codes

lThe DM300Quick Reference Guide provides essential information about the DM300 reader.

Cognex->DataMan Software v x.x.x->Documentation->English->DM300 Series->DM300 Quick Reference Guide

Getting Started

lThe DataMan Fixed-Mount Readers Reference is a complete online hardware reference for the DataMan fixed-

mount ID readers.

Cognex->DataMan Software v x.x.x->Documentation->English->DM300 ->Fixed-Mount Reference Manual

lThe DataMan Questions and Answers document provides context-sensitive information. You can view this help

inside the DataMan Setup Tool or as a stand-alone help file.

Cognex->DataMan Software v x.x.x->Documentation->DM300->Questions and Answers

lThe DataMan Control Commands lists DataMan Control Commands with all relevant information. You can view

this help inside the Setup Tool or as a stand-alone help file.

Cognex->DataMan Software v x.x.x->Documentation->English->DataMan Control Commands

lThe Setup Tool Reference Manual describes the user interface of the DataMan Setup Tool software.

Cognex->DataMan Software v x.x.x->Documentation->English->Setup Tool Reference Manual

lThe Release Notes list detailed system requirements and additional information about this DataMan software

release.

Cognex->DataMan Software v x.x.x->Documentation->DataMan v x.x.x Release Notes

DataMan 300 Series Accessories

Lens Options

10.3 mm M12 lens with locking* and

10.3 mm IR M12 lens with locking**

DM300-LENS-10

DM300-LENS-10-

Liquid lens module and pre-focused 10.3 mm IR M12 lens with

wrench**

Liquid lens module and pre-focused 10.3 mm M12 lens with

wrench*

DM300-LENS-

10LL-IR

DM300-LENS-

10LL

19 mm liquid lens module* DM300-LENS-

19LL

8 mm F5.6 fixed aperture lens

12 mm F8 fixed aperture lens

16 mm F8 fixed aperture lens

16 mm F11 fixed aperture lens

25 mm F8 fixed aperture lens

25 mm F11 fixed aperture lens

35 mm F8 fixed aperture lens

35 mm F11 fixed aperture lens

LEC-CFF08-F5.6

LEC-CFF16-F8

LEC-CFF16-F11

LEC-CFF25-F8

LEC-CFF25-F11

LEC-CFF35-F8

LEC-CFF35-F11

24 mm F6 liquid lens module* DM360-LENS-

24LL

Getting Started

16 mm M12 lens with locking** DM300-LENS-16

25 mm M12 lens with lens spacer and hex wrench (also requires

Extension kit)**

DM300-LENS-25

Extension kit DM300-EXT

DM500 C-Mount cover DM500-CMTLC-

000

DM500 Lens cover extender DM500-LNSEXT-

000

Blue,

red,

green,

orange bandpass filters

CKR-BP470

CKR-BP635

CKR-BP525

CKR-BP590

* With built-in IR blocking filter

** Without built-in IR blocking filter

Lens Covers

Clear lens cover DM300-CLCOV

Clear lens cover with white LED illumination