Cognex DataMan 8072 Bedienungsanleitung
DataMan®8072 Verifier
Quick Reference Guide
2022 August 04
Revision: 6.3.2.3
Precautions
WARNING: LASER LIGHT, DO NOT STARE INTO BEAM: CLASS 2
LASER PRODUCT. FAILURE TO FOLLOW THESE INSTRUCTIONS
MAY CAUSE SERIOUS INJURY.
To reduce the risk of injury or equipment damage, observe the following precautions
when you install the Cognex product:
lThis product is intended for industrial use in automated manufacturing or
similar applications.
lThe safety of any system incorporating this product is the responsibility of
the assembler of the system.
lThis product does not contain user-serviceable parts. Do not make
electrical or mechanical modifications to product components.
Unauthorized modifications can void your warranty.
lRoute cables and wires away from high-current wiring or high-voltage
power sources to reduce the risk of damage or malfunction from the
following causes: over-voltage, line noise, electrostatic discharge (ESD),
power surges, or other irregularities in the power supply.
lChanges or modifications not expressly approved by the party responsible
for regulatory compliance could void the user’s authority to operate the
equipment.
lEnsure that the cable bend radius begins at least six inches from the
connector. Cable shielding can be degraded or cables can be damaged or
wear out faster if a service loop or bend radius is tighter than 10X the cable
diameter.
2
lThis device should be used in accordance with the instructions in this
manual.
lAll specifications are for reference purposes only and can change without
notice.
lThis product is intended for industrial use in automated manufacturing or
similar applications.
lThe safety of any system incorporating this product is the responsibility of
the assembler of the system.
lThis product does not contain user-serviceable parts. Do not make
electrical or mechanical modifications to product components.
Unauthorized modifications can void your warranty.
3
Symbols
The following symbols indicate safety precautions and supplemental information:
WARNING:This symbol indicates a hazard that could cause death, serious personal injury or electrical
shock.
CAUTION:This symbol indicates a hazard that could result in property damage.
Note: This symbol indicates additional information about a subject.
Tip: This symbol indicates suggestions and shortcuts that might not otherwise be apparent.
4
Product Overview
WARNING:LASER LIGHT, DO NOT STARE INTO BEAM
1 Imager and Lens Optical System
2 Illumination
3 Removable Standoff
4 Trigger (press and release)
5 Lanyard hook
6 Indicator light
7 Communication module insertion point
5
Status indicators:
lCommunication:
oGREEN = good verification
oRED = bad verification
6
DataMan 8072 Verifier Kits
The DataMan 8072 Verifier is available in the following kits:
Model number Description
DMV-8072V-S-0200U (USA power adapter)
DMV-8072V-S-0200E (EU power adapter) DataMan 8072 Verifier Ethernet Kit with Stand:
lDataMan 8072 Verifier
lStandoff
lEthernet Slide-In
lEthernet Cable Attachment
lStandard Ethernet Cable
lPOE Injector
lBasic Calibration Card
lStand Accessory
DMV-8072V-S-0100 DataMan 8072 Verifier USB Kit with Stand:
lDataMan 8072 Verifier
lStandoff
lUSB Slide-In
lUSB Cable
lPower Supply
lBasic Calibration Card
lStand Accessory
7
DMV-8072V-0200 (USA power adapter)
DMV-8072V-0200-EU (EU power adapter) DataMan 8072 Verifier Ethernet Kit:
lDataMan 8072 Verifier
lStandoff
lEthernet Slide-In
lEthernet Cable Attachment
lPOE Injector
lBasic Calibration Card
DMV-8072V-0100 DataMan 8072 Verifier USB Kit
lDataMan 8072 Verifier
lStandoff
lUSB Slide-In
lUSB Cable
lPower Supply
lBasic Calibration Card
DMV-8072V-0000 DataMan 8072 Verifier Kit No Slide-In
lDataMan 8072 Verifier
lStandoff
lBasic Calibration Card
8
DMV-8072VHD-0100 DataMan 8072 Verifier Kit No Slide-In
lDataMan 8072 Verifier-HD
lStandoff
lUSB Slide-in
lUSB Cable
lPower Supply
lBasic Calibration Card
lStand Accessory
DMV-8072VHD-02 (USA power adapter)
DMV-8072VHD-02EU (EU power adapter) DataMan 8072 Verifier-HD Ethernet Kit:
lDataMan 8072 Verifier-HD
lStandoff
lEthernet Slide-in
lEthernet Cable Attachment
lPOE Injector
lBasic Calibration Card
DMV-8072VHD-S-01 DataMan 8072 Verifier-HD USB Kit with Stand:
lDataMan 8072 Verifier-HD S-model
lStandoff
lUSB Slide-in
lUSB Cable
lPower Supply
lBasic Calibration Card
lStand Accessory
9
DMV-8072VHD-02U (USA power adapter)
DMV-8072VHD-02E (EU power adapter) DataMan 8072 Verifier-HD Verifier Ethernet Kit with
Stand:
lDataMan 8072 Verifier-HD S-model
lStandoff
lEthernet Slide-in
lEthernet Cable Attachment
lStandard Ethernet Cable
lPOE Injector
lBasic Calibration Card
lStand Accessory
DataMan 8072V Verifier and stand-off Ethernet or USB slide-in
Stand accessory Calibration Cards
10
Andere Handbücher für DataMan 8072
3
Inhaltsverzeichnis
Andere Cognex Laborausrüstung Handbücher
Beliebte Laborausrüstung Handbücher anderer Marken
Agilent Technologies
Agilent Technologies 5800 ICP-OES Bedienungsanleitung
Endress+Hauser
Endress+Hauser Cleanfit CPA875 Bedienungsanleitung
NI
NI PXI-5422 Handbuch
Collomix
Collomix Aqix Bedienungsanleitung
SPEX SamplePrep
SPEX SamplePrep 6875 Freezer/Mill Series Bedienungsanleitung
Ocean Insight
Ocean Insight FLAME-NIR+ Bedienungsanleitung
Parker
Parker ALIGN-MG-NA Bedienungsanleitung
BD
BD 644787 Bedienungsanleitung
DENTAURUM
DENTAURUM Compact Megaplus Bedienungsanleitung
Biuged Laboratory Instruments
Biuged Laboratory Instruments BGD 626 Bedienungsanleitung
VWR
VWR SAS Super IAQ Bedienungsanleitung
illumina
illumina MiSeqDx Bedienungsanleitung