CommScope ETHERSEAL 1479563-2 Bedienungsanleitung

Instruction Sheet

1 of 2

To obtain information on CommScope®products,

contact your local CommScope®account

representative, PartnerPRO™Network Partner

or visit our website at www.commscope.com

This product is covered by one or more U.S.patents

or their foreign equivalents. For patents, see

www.commscope.com /ProductPatent/ProductPatent.aspx

408-8875

DEC. 2016 Rev E

RECEPTACLE KIT

DESCRIPTION

INSTRUCTION SHEET

1479563-2

SL Series Jack, Unshielded Twisted Pair Category 5e

408-8417

1479564-2

SL Series Jack , Shielded Category 5e

408-8602

1479565-2

SL Series Jack , Unshielded Twisted Pair Category 6

408-8417

1479566-2

SL Series Jack , Shielded Category 6

408-8417

1479599-2

In-Line Coupler , Unshielded Twisted Pair Category 5e

1479600-2

In-Line Coupler , Shielded Category 5e

1933589-2

AMP-TWIST 6S Jack

411-93007

Figure 1

Each kit consists of a receptacle and either an in-line coupler or jack (with strain relief or dust cover). A nut and

O-ring is included for installing the receptacle in a panel or faceplate. The SL series jack kit includes a shield.

See Figure 1.

NOTE

Dimensions in this instruction sheet are in metric units [with U.S. customary units in brackets]. Figures are not drawn to scale.

Reasons for re-issue of this instruction sheet are provided in Section 2, REVISION SUMMARY.

1. ASSEMBLY

1.1. Wire Preparation and Jack Termination

Prepare the wire and terminate the jack according to the instruction sheet listed in Figure 1.

NOTE

The jacks accepts 4-pair, twisted-pair cable having sizes 24 to 22 AWG solid conductors. The SL series jack also accepts

cable having sizes 26 to 24 AWG stranded conductors with a maximum conductor insulation diameter of 1.27 mm [.050 in.].

1.2. Panel or Faceplate Cutout

Cut the panel or faceplate according to Figure 2.

ETHERSEAL®Receptacle Kits

Receptacle

O-Ring

Nut

Shield

(Included with

SL Series Kit Only)

AMP-TWIST

6S Jack

SL Series

Jack

Dust Cover

Bend-Limiting

Strain Relief

408-8875

Rev E

2 of 2

Figure 2

1.3. Installation

1. Slide the O-ring over the threaded portion of the receptacle. See Figure 2.

2. Insert the threaded portion of the receptacle through the front of the panel or faceplate. Orient the

receptacle in the cutout so that the white arrow indicator on the front of the receptacle is facing up.

See Figure 2.

3. From the back of the panel or faceplate, thread the nut onto the threaded portion of the receptacle.

See Figure 2. Tighten the nut to a torque of 2.26 Nm [20 in.-lb].

4. Refer to Figure 3, and insert the jack or coupler into the receptacle as follows:

a. From the back of the receptacle, align the fixed latch of the jack or coupler with the white arrow

indicator of the receptacle.

b. Tilt the back of the jack or coupler up at a slight angle, and slide it into the opening of the

receptacle. Hook the fixed latch into the slot inside the receptacle.

c. Rotate the back of the jack or coupler down so that the movable latch deflects and locks into the

receptacle.

Figure 3

2. REVISION SUMMARY

Revisions to this instruction sheet include:

Rebranded to CommScope®

Nut

O-Ring

Back of

Faceplate (Ref)

White Arrow Indicator

of Receptacle

Recommended Panel or Faceplate Cutout

Installing Receptacle

Note: Not to Scale

25.65 mm

[1.010 in.]

⌀28.45 mm

⌀[1.120 in.]

White Arrow Indicator

of Receptacle

Front of Receptacle

Movable Latch

Jack (Ref)

Slot Inside of

Receptacle

Fixed Latch

Opening of

Receptacle

Fixed Latch

Movable Latch

Rotate

Jack

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere CommScope Kabel und Steckverbinder Handbücher

CommScope

CommScope QWIK MPO Series Bedienungsanleitung

CommScope

CommScope LC Bedienungsanleitung

CommScope

CommScope LC Bedienungsanleitung

CommScope

CommScope HELIAX FiberFeed HFA208 Series Merkblatt

CommScope

CommScope FIBER INDEXING TERMINAL Bedienungsanleitung

CommScope

CommScope FIST-RSKG-16 Bedienungsanleitung

CommScope

CommScope LightCrimp Plus SC Simplex Bedienungsanleitung

CommScope

CommScope HELIAX FiberFeed HTC1006 Series Merkblatt

CommScope

CommScope BUDI-S Bedienungsanleitung

CommScope

CommScope HELIAX FiberFeed FDH1210-24SE2 Series Merkblatt

CommScope

CommScope HELIAX FiberFeed HFE810 Series Merkblatt

CommScope

CommScope HELIAX FiberFeed Bedienungsanleitung

CommScope

CommScope SYSTIMAX 360 iPatch... Bedienungsanleitung

CommScope

CommScope FDH1204-24SE2 Bedienungsanleitung

CommScope

CommScope HELIAX MFJS6UDHNA00 Bedienungsanleitung

CommScope

CommScope LSX-288 Bedienungsanleitung

CommScope

CommScope SYSTIMAX VisiPatch CPC5562 Bedienungsanleitung

CommScope

CommScope HELIAX FiberFeed FDH1206-12M50 Series Merkblatt

CommScope

CommScope ION-M7P Bedienungsanleitung

CommScope

CommScope FOSC450 C Bedienungsanleitung

CommScope

CommScope NOVUX SEC 100 Bedienungsanleitung

CommScope

CommScope 760230938 Bedienungsanleitung

CommScope

CommScope FOSC-350C Bedienungsanleitung

CommScope

CommScope LightCrimp Plus LC Bedienungsanleitung

Beliebte Kabel und Steckverbinder Handbücher anderer Marken

Philips

Philips SWA6310 Bedienungsanleitung

StarTech.com

StarTech.com CRJ4550PK Bedienungsanleitung

Nohau

Nohau EMUL-IP2K-PC Bedienungsanleitung

Foxun

Foxun SX-SP144E-HD4K2K Bedienungsanleitung

Philips

Philips SWA3305W Bedienungsanleitung

opticis

opticis Stretch DVIM1-1P0x Bedienungsanleitung

Volkswagen

Volkswagen VAS 6558A Bedienungsanleitung

NEXIBO

NEXIBO N-13 Bedienungsanleitung

CYP

CYP PU-1H3HBTL Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1784-u2dhp Bedienungsanleitung

Global Caché

Global Caché Flex Link Blaster Bedienungsanleitung

Hauppauge

Hauppauge USB-Live2 Bedienungsanleitung

Fenix

Fenix MPSV 15 Bedienungsanleitung

BEGA

BEGA 71 085 Bedienungsanleitung

Tesla

Tesla HPWC Bedienungsanleitung

GAMERON

GAMERON LUXURY TV CABLE Bedienungsanleitung

molex

molex Milli-Grid Dual row 87568 Series Bedienungsanleitung

Burndy

Burndy Continental Industries thermOweld CRE-7 Bedienungsanleitung