CommScope FDH1204-24SE2 Bedienungsanleitung
www.commscope.com Bulletin # 7689527 Rev. L 1
Technical Publication
Related Support and Learning Opportunities Offered by the CommScope Infrastructure Academy
The insights and expertise contained in this manual represent just one small part of CommScope's
global learning initiative. Few industries are evolving as quickly as wireless communications. Every
technological innovation impacts what happens in the field. Our customers look to the CommScope
Infrastructure Academy to make sure their technicians and installers are well trained, well-prepared,
and well-educated to take advantage of opportunities as they evolve. To access a course, go to
www.commscopetraining.com/coursecatalog.php, course #6107
Section 1: Direct Breakout Components / Accessories ……………………………………………………….…02
Section 2: General Specifications / Color Coding………………………………….....……………………….…03
Section 3: HELIAX®Trunk Cable Hoisting ......................................………………………………………..………04
Section 4: HELIAX®Tails ...............................……............……………………..…….…………………………….....06
Section 5: Supporting Fiber Tails .......................................................................……………………..……...…07
Section 6: FullAXS Installation ...............……............……………………….…….………...…………………….....09
Section 7: Breakout Procedure / Connection Considerations ......…....……………………………..……...…11
Section 8: All-in-One Cleaner / Inspecting .....…...........................................................…………………....…12
Section 9: Excess Cable Management .................................................……………….…….……………..……13
Section 10: Jacketing Removal Procedure / Check List .......................……………….…….……………..……14
Installation Guidelines – HELIAX®
Solution: Hybrid Direct Fiber
www.commscope.com Bulletin # 7689527 Rev. L 2
Technical Publication
Section 1: HELIAX®Direct Components
Accessories
PART NUMBER DESCRIPTION
UG12158-15B4-T Universal grounding kit
FCCT-L LC interface cleaner
FCCT-ODC ODC compatible interface cleaner
!
WARNING:
CommScope
cables require the
use of approved
installation
accessories.
CABLE SERIES HOISTING GRIP SnapStak®PLUS STANDAR HANGER
FDH1210-24SE2 19256B-C SSH-L 42396A-1 (add grommet HG-24-114)
FDH1206-24SE2 19256B-C SSH-XL 42396A-1 (add grommet HG-33-114)
FDH1204-24SE2 29961-C SSH-XL 42396A-2 (add grommet HG-44-158)
FDH1204-48SE2 29961-C SSH-XL 42396A-2 (add grommet HG-44-158)
Power breakout tail NA SSH-1014 43211A (add grommet HG-10MM-12)
Fiber breakout tail NA SSH-47 43211A (add grommet HG-5MM-12)
Breakout
Fiber tail
with ODC
compatible
connector
Equipment
cabinet / shelter
Hybrid
FiberFeed
Cable
Separate fiber and
power conductors
Maximum hanger spacing
0.9 m (3 ft) - 1.2 m (4 ft)
Mounting Kit Included
Part Number: DCM-U
(additional components
maybe required
based on installation
configuration)
Minimum Distance
0.5 m (1.6 ft)
3 RRU configuration utilizing
one 3 x 6 solution shown
RRU RRU RRU
www.commscope.com Bulletin # 7689527 Rev. L 3
Technical Publication
FDH1206-24SE2-XXX
UL Type TC-OF-ER
6 AWG
12
24
Single mode fiber
2370 kg/km | 1590 lb/kft
36.0 mm | 1.40 in
1000 mm | 39 in
5000 mm | 196 in
1700 mm | 67 in
1700 mm | 67 in
444.5 mm | 17.5 in
FDH1210-24SE2-XXX
UL Type TC-OF-ER
10 AWG
12
24
Single mode fiber
1050.0 kg/km | 705.5 lb/kft
25.14 mm | 0.99 in
1000 mm | 39 in
5000 mm | 196 in
1700 mm | 67 in
1700 mm | 67 in
251.5 mm | 9.9 in
FDH1204-24SE2-XXX
UL Type TC-OF-ER
4 AWG
12
24
Single mode fiber
3400 kg/m | 2285 lb/ft
44.8 mm | 1.76 in
1000 mm | 39 in
5000 mm | 196 in
1700 mm | 67 in
1700 mm | 67 in
523.2 mm | 20.6 in
FDH1204-48SE2-XXX
UL Type TC-OF-ER
4 AWG
12
48
Single mode fiber
3576 kg/km | 2403 lb/kft
44.70 mm | 1.76 in
1000 mm | 39 in
5000 mm | 196 in
1110 mm | 44 in
1700 mm | 67 in
523.2 mm | 20.6 in
Color Coding Power: 24 and 48 bers
End 1 Label Color End 2 Label Color
1RED 1RED
1RED
2BLUE 2BLUE
2BLUE
3GREEN 3 GREEN
3 GREEN
4YELLOW 4YELLOW
4YELLOW
5WHITE 5WHITE
5WHITE
6BLACK 6BLACK
6BLACK
End 1 Color End 2 Color
1RED 1RED
2GREEN 2GREEN
3BLUE 3BLUE
4YELLOW 4YELLOW
5WHITE 5WHITE
6BLACK 6BLACK
7RED (X2) 7RED (X2)
8GREEN (X2) 8GREEN (X2)
9BLUE (X2) 9BLUE (X2)
10 YELLOW (X2) 10 YELLOW (X2)
11 WHITE (X2) 11 WHITE (X2)
12 BLACK (X2) 12 BLACK (X2)
Cable Type
Center Conductor Gauge
Conductors, quantity
Total Fiber Quantity
Fiber Type
Dimensions
Cable Weight
Diameter Over Jacket
Breakout Length, Fiber end 1
Breakout Length, Power end 1
Breakout Length, Fiber end 2
Breakout Length, Power end 2
Physical Specifications
Minimum Bend Radius
Section 2: General Specifications 6x12 Conguration
ODC
compatible
connector
DLC
connector
End 1
RRU
End 2
BBU
Cable
Assembly
Length
Power
cords
Power
conductors
Color Coding Fiber: 24 bers
Torque Specications
Description Tightening Torque, N●m, (in-lb)
M63 cable gland 18 (13.3)
www.commscope.com Bulletin # 7689527 Rev. L 4
Technical Publication
Section 3: Hoisting Considerations
Hoisting Recommendations
Reminder:
Plan grip location by
measuring distance (D)
from ODC compatible
connector to tower
support member.
(D)
(D)
Direct
Breakout
Grip
Location
• Be sure that the Direct breakout is not damaged by attachment of a hoisting grip or during the hoisting process.
Attach a hoisting grip on the jacketed cable no less than .3 m (1 ft) below the fibre breakout point. Prevent the
fibre tails and power conductors from undue movement during hoisting by securing with tie ropes every 1 m (3 ft)
to the hoisting line.
• Installation temperature range is -20°C to +60°C (-4°F to +140°F).
• Minimum cable bend radii and tensile load can be found on-line in our eCatalog section at commscope.com.
• CommScope Lace-Up Hoisting Grip 19256B-C required for 1210 and 1206 series. Hoisting Grip 29961-C required for
1204 series.
• Hoisting Grips are the primary support for the cable weight and must be anchored to the support structure with
tension applied, then the cable hangers are fastened to the support structure in 0.9 m (3 ft) intervals.
• During final connections to RRU, do not bend the fibre ends tighter than 30 mm (1.2 in) bend radius or you take
the risk of breaking the glass fibres.
Hybrid Fiber Cables weigh more than traditional coaxial cables. Be sure to follow proper hoisting and
attachment procedures.
!
ODC
compatible
Connectors
Color Coding Fiber: 48 bers
End 1 Color End 2 Color
13 RED GREEN 13 GREEN RED
14 GREEN GREEN 14 GREEN GREEN
15 BLUE GREEN 15 GREEN BLUE
16 YELLOW GREEN 16 GREEN YELLOW
17 WHITE GREEN 17 GREEN WHITE
18 BLACK GREEN 18 GREEN BLACK
19 RED BLUE 19 BLUE RED
20 GREEN BLUE 20 BLUE GREEN
21 BLUE BLUE 21 BLUE BLUE
22 YELLOW BLUE 22 BLUE YELLOW
23 WHITE BLUE 23 BLUE WHITE
24 BLACK BLUE 24 BLUE BLACK
End 1 Color End 2 Color
1RED - 1- RED
2GREEN - 2- GREEN
3BLUE -3-BLUE
4YELLOW - 4- YELLOW
5WHITE - 5- WHITE
6BLACK -6-BLACK
7RED WHITE 7WHITE RED
8GREEN WHITE 8WHITE GREEN
9BLUE WHITE 9WHITE BLUE
10 YELLOW WHITE 10 WHITE YELLOW
11 WHITE WHITE 11 WHITE WHITE
12 BLACK WHITE 12 WHITE BLACK
www.commscope.com Bulletin # 7689527 Rev. L 5
Technical Publication
Required
Apply provided Tie
Wrap to the base of
the hoisting grip before
applying tension to
the line.
!
Clevis
Steel cable
or rope
hoist line
Hoisting
grip
Minimum
leader
5.3 M
(17 ft)
Maximum between hoisting grips
1210 and 1206 series 60 M (200 ft),
1204 series 45.7 M (150 ft)
Protective
sock
Hoisting Considerations
Tie back ropes
1 M (3 ft)
www.commscope.com Bulletin # 7689527 Rev. L 6
Technical Publication
General Specifications
Cable Type DFJ-2S109N-xxM
Brand HELIAX®
Total Fiber Quantity 2
Fiber Type Bend insensitive single mode
fiber (G.657.A2)
Jacket Color Black
Dimensions
Cable Weight 48.0 kg/km | 105.8 lb/kft
Diameter Over Jacket 6 mm | .24 in
Physical Specifications
Minimum Bend Radius, unloaded 6 cm | 2.4 in
Tensile Load, short term, maximum 1110 N | 250 lbf
• The terminated fiber ends however are fragile and must be protected during installation. Leave the packaging
around the fiber ends in place until ready to make final connect of the jumper at the RRU or BBU.
• DO NOT BEND THE FIBER ENDS TIGHTER THAN 30 mm (1.2 in) BEND RADIUS ELSE THERE IS A RISK OF BREAKING THE GLASS
FIBERS.
• Attach the main cable securely to the structure or equipment using hangers to prevent strain on connections from
movement in wind or snow/ice conditions.
• Ensure the fiber and power connections and seated firmly in the RRU.
• Installation temperature range is -20°C to +60°C (-4°F to +140°F).
Section 4: General Specifications Tails
ODC
compatible
connector
DLC
connector
End 1
RRU
End 2
Direct
Breakout
Cable
Assembly
Length
Torque Specications
Interface Type Tightening Torque, N●m, (in-lb)
ODC compatible connector 1 (8.8)
Lengths Available 1 2 3 5 10 30
Weather
shroud
installed
Weather
shroud not
shown
www.commscope.com Bulletin # 7689527 Rev. L 7
Technical Publication
Section 5: Supporting Fiber Tails
Open grommet and place
it over the fiber tail.
Place the hanger over the grommet
and place in support structure.
Stack hangers as required. Repeat
with tails being routed to the RRU
and spare fibers.
Connectors are fully weather sealed and do not
require additional weatherizing. Unused power
conductors should be left with the protective cap
in place.
Option 2
123
www.commscope.com Bulletin # 7689527 Rev. L 8
Technical Publication
UP
If additional hangers are not available
slide the protection sleeve from the BBU
end over any spare fibers to protect
them.
Place tape over fiber tails and
protective sleeve end to hold in
place. Support protection sleeve
using tie wraps.
12
Spare Fiber Handling
www.commscope.com Bulletin # 7689527 Rev. L 9
Technical Publication
Section 6: FA-FWS-E-1 Weatherproong Shroud Installation
1
2
Carefully feed compression nut over DLC connector and slide onto jacketing.
Do not twist or bend the DLC connector or ber. Excessive force or bending may break the ber.
Carefully feed weather shroud body over DLC connector.
3
Wrap the rubber split grommet around the jacketing with the stepped end towards shroud body. Push gasket
into the clamping tynes. Approximately 0.9 mm will protrude from the tynes when fully installed.
4
Engage the compression nut one full revolution to keep the grommet in place but do not tighten fully to allow
for adjustment during RRU connection.
5
Slide weather shroud down jacketing to allow full access to the DLC connector during the RRU connection.
If a Weather Shroud is pre-installed care-
fully remove the end cap by holding it
stationary and turning the top nut coun-
ter-clock wise. Skip to step #6.
Scan to view installation video
www.commscope.com Bulletin # 7689527 Rev. L 10
Technical Publication
6
7
8
Slide the weather shroud up to the RRU. Turn top nut clockwise to secure to RRU bulkhead connector.
Finish hand tightening the compression nut onto jacketing to complete instal-
lation. The compression nut must be tightened until it is completely against the
cable gland body. The grommet will protrude slightly from the compression nut.
Reverse steps 7 and 8 to remove sleeve for maintenance.
21
12
Correct support
clamp locations
!
WARNING
Remove the dust caps from DLC connector and seat
into the RRU. Listen for a distinct click. Do not twist
DLC connector or kink the ber during installation.
Dieses Handbuch passt für folgende Modelle
3
Inhaltsverzeichnis
Andere CommScope Kabel und Steckverbinder Handbücher
CommScope
CommScope 760230938 Bedienungsanleitung
CommScope
CommScope AMP NETCONNECT 1933352 Series Bedienungsanleitung
CommScope
CommScope LightCrimp Plus ST Bedienungsanleitung
CommScope
CommScope SYSTIMAX 360 iPatch... Bedienungsanleitung
CommScope
CommScope FIST-RSKG-1 Bedienungsanleitung
CommScope
CommScope SYSTIMAX 360 iPatch PATCHMAX Bedienungsanleitung
CommScope
CommScope OSP-CLPFEC-LG Bedienungsanleitung
CommScope
CommScope SCIL-B Bedienungsanleitung
CommScope
CommScope HELIAX FiberFeed HTC1006 Series Merkblatt
CommScope
CommScope HELIAX MFJS6UDHNA00 Bedienungsanleitung
CommScope
CommScope HELIAX FiberFeed FDH1206-12M50 Series Merkblatt
CommScope
CommScope NOVUX Bedienungsanleitung
CommScope
CommScope FOSC-400BG Bedienungsanleitung
CommScope
CommScope OFDC-A4 SPLICE/PATCH Bedienungsanleitung
CommScope
CommScope AMP NETCONNECT SL Series Bedienungsanleitung
CommScope
CommScope FACT Bedienungsanleitung
CommScope
CommScope SYSTIMAX 360 760150144 Bedienungsanleitung
CommScope
CommScope OmniReach FTTX Bedienungsanleitung
CommScope
CommScope FOSC-450D Bedienungsanleitung
CommScope
CommScope ETHERSEAL 1479563-2 Bedienungsanleitung
