Concourse SMART WHEELS Bedienerhandbuch
1
1300 650 059 | concoursegolf.com
SMART WHEELS
USER INSTRUCTION MANUAL
Version 3.0
1300 650 059 | concoursegolf.com 2
CONGRATULATIONS ON YOUR PURCHASE OF THE CONCOURSE GOLF SMART WHEELS.
Whilst designed to be simple and intuitive to operate, please read the charging instructions prior to
connecting to power for the very first time.
We recommend you read and familiarise yourself with this User Manual prior to operation, to help you get
the most enjoyable ownership experience with your Smart Wheels.
User Instruction Manual | Version 3.0
User Instruction Manual | Version 1.71300 650 059 | concoursegolf.com
WE’RE HERE TO HELP
CUSTOMER SUPPORT OR PRODUCT ENQUIRES PLEASE CONTACT CONCOURSE GOLF ON 1300 650 059
OR EMAIL INFO@CONCOURSEGOLF.COM
1.0 Product Registration .........................................................4
2.0 What’s Inside - Equipment Check .............................................4
3.0 Charging Instructions ........................................................5
4.0 Connecting The Smart Wheels To Your Clicgear Push Buggy....................8
5.0 Connecting The Smart Wheels To Your CBM3 Push Buggy......................10
6.0 Connecting The Smart Wheels To Other Push Buggy Models ...................11
7.0 Removing your Smart Wheels ................................................12
8.0 Remote Control Function.....................................................13
9.0 Remote Control Mount.......................................................13
10.0 Operating & Power Assited Manual Steering ..................................14
11.0 Important Information .......................................................15
12.0 Warranty & Service ..........................................................15
CONTENTS:
3
1300 650 059 | concoursegolf.com 4
IMPORTANT: TO MAXIMISE YOUR BATTERY LIFE, PLEASE READ THE CHARGING INSTRUCTIONS (SECTION 3)
PRIOR TO CONNECTING TO A POWER POINT FOR THE FIRST TIME.
1.0 PRODUCT REGISTRATION
2.0 EQUIPMENT CHECK
SMART WHEELS AXLE CHARGER POWER
CABLE (PART 1)
SOFTWARE
UPGRADE CABLE
CHARGER POWER
CABLE (PART2)
REMOTE CONTROL
CHARGING CABLE
REMOTE
REMOTE
CONTROL
MOUNT
SMART WHEELS
CARRY CASE
REMOTE CONTROL
POUCH
OPTIONAL
To assist with any future software updates and expedite any service enquires throughout the lifetime of your ownership, please ensure
you register your Concourse Smart Wheel purchase online at www.concoursegolf.com
In the unlikely event you may need to complete any warranty returns, the following items will assist with swift service.
• Please retain the carboard box you received your Smart Wheels in for convienient return/shipping.
• Proof of Purchase – Receipt
For details regarding warranty return visit concoursegolf.com or call 1300 650 059
User Instruction Manual | Version 3.0
3.1 Remove Smart Wheels from packaging and place face down.
3.2 Remove the two charger power cables )(2 parts) and connect
to each other as shown below.
3.3 Now connect corresponding charging sockets to each wheel.
Ensure these cables are firmly connected to the wheels, and
charger power cables connected before connecting to the
power point in step 6.
1300 650 059 | concoursegolf.com 5
3.0 CHARGING INSTRUCTIONS
IMPORTANT: DO NOT CONNECT CHARGER TO POWER POINT UNTIL BOTH CHARGER POWER CABLES ARE
CONNECTED TO THE WHEELS .
User Instruction Manual | Version 3.0
1 2
ENSURE BOTH WHEELS
ARE CONNECTED
If you have purchased the
optional Travel Case and once
you are familiar with the charging
process you may connect
and charge the wheels whilst
remaining in the Travel Case.
3 4
5 6 7
User Instruction Manual | Version 1.71300 650 059 | concoursegolf.com 6
1300 650 059 | concoursegolf.com
IMPORTANT: PLEASE ENSURE BOTH THE WHEELS AND REMOTE ARE FULLY CHARGED AND KEPT ON CHARGE AT ALL
TIMES BETWEEN ROUNDS OF GOLF. ONLY REMOVE THE CHARGER FROM THE WHEELS WHEN YOU ARE READY TO
PLAY. ALSO AVOID PARTIAL CHARGING WHICH MAY AFFECT LONG TERM BATTERY LIFE.
CHARGING FULL CHARGE
3.4 You may now connect the charging unit to a Power Point and
begin charging for the first time. You will notice an LED light just
below the wheels charging point that should appear RED when
charging begins, and then turn GREEN once the wheels are fully
charged.
3.5 Remove the remote control unit from it’s packaging and
connect the USB charging cable. Now connect the Remote USB
Charging Cable to a USB Charging Port .
Whilst this can be done via a computer’s USB, it is
recommended to use a USB charger that connects directly to
mains power for the most effective and quickest charge.
User Instruction Manual | Version 3.0
1 2 3
1300 650 059 | concoursegolf.com 7
IMPORTANT : ONCE BOTH YOUR WHEELS ARE FULLY CHARGED AND A GREEN LED IS
SHOWING ON BOTH WHEELS, FIRST TURN OFF THE CHARGER AND THEN REMOVE THE
POWER LEAD FROM THE OUTLET BEFORE DISCONNECTING THE WHEELS.
FULL CHARGE
(LIGHT TURNS OFF)
CHARGING
3.7 Once both your Smart Wheels and remote are fully charged
please follow the disconnection instructions below very carefully.
3.6 When charging of the remote begins, you will notice the
middle light on the remote illuminate to Red indicating
charging is required or in process. Once the remote is
completely charged there will be no light showing.
CHARGER DISCONNECTION
User Instruction Manual | Version 3.0
1 2 3
8
1300 650 059 | concoursegolf.com
4.0 CONNECTING THE SMART WHEELS TO YOUR CLICGEAR
4.1 Position your buggy in a safe manner then remove the original
Clicgear buggy wheels by unscrewing the lock-nut. Please
ensure you use a 19mm Ring spanner to avoid damaging the
nut.
4.2 Position your buggy in a safe manor then remove the lock nut
on your original buggy wheel using a 19mm ring spanner and
then remove the Wheel.
4.3 Locate the 2 small metal Smart Wheel Axles – Left and Right
are the same and fit on either side. You will notice for Clicgear
buggies the axles are attached using a lock nut.
4.4 Connect both Smart Wheels axles to your existing push
buggy where you removed the original buggy wheels from as
indicated below.
MOST CLICGEAR MODELS
PUSH MODELS ONLY
19MM RING
SPANNER REQUIRED
User Instruction Manual | Version 3.0
4.5 The Smart Wheels are labelled Left and Right.
Left and Right of the buggy is determined by standing behind
the buggy holding the handle as you would do during play.
Now pick up one wheel and guide it onto the Axle already
connected to your buggy. To avoid excess dirt clogging the
charging socket it is recomended to position the charging
socket at the highest point from the ground as you slide the
wheel into positon. Press the red button on the outside of the
wheel as you guide it onto the axle. Release the red button
when the wheel is in position.
4 .6 To ensure each Smart Wheels is securely locked in place you
may need to slightly rotate (up to ¼ turn) so the raised point
on outside of the axle neatly slots into the corresponding
indentation on the hub of the wheel.
This ensures the central hub of each Smart Wheel locks in place
and does not free-wheel.
Once both wheels are connected in the same manner they will
be able to drive the buggy.
2
1
1300 650 059 | concoursegolf.com 9
SECURELY LOCKED IN POSITION
User Instruction Manual | Version 3.0
5.0 CONNECTING THE SMART WHEELS TO YOUR CBM3 BUGGY
As an owner of the Concourse CBM3 Push Buggy you will not need to fit different axles (as opposed to other push buggy models).
The Smart Wheels will connect directly to the CBM3 axle, however, you do require locking pins to secure the central hub of the
Smart Wheels so the outer drives your buggy.
Before installing the CBM3 axle locking pins, please ensure you position your buggy in a safe and stable manner then remove the
two large free spinning wheels.
5.1 Enclosed you will find two locking pins and a 3mm allen key
as shown below.
5.2 You will notice a hole [also shown below] to thread the
locking pin screw through using the allen key.
5.3 Remove the original buggy wheels. Hold the locking pin,
then using the allen key thread the locking pin screw on
smoothly until it’s secure and tight. Repeat this process with
the opposite side of the CBM3 buggy.
5.4 The Smart Wheels are labelled Left and Right.
Left and Right of the buggy is determined by standing behind
the buggy holding the handle as you would during play.
Now pick up one wheel and guide it onto the Axle already
connected to your buggy. To avoid excess dirt clogging the
charging socket it is recomended to position the charging
socket at the highest point from the ground as you slide the
wheel into positon. Press the red button on the outside of the
wheel as you guide it onto the axle. Release the red button
when the wheel is in position.
5.5 To ensure each Smart Wheels is securely locked in place you
may need to slightly rotate (up to ¼ turn) so the raised point
on outside of the axle neatly slots into the corresponding
indentation on the hub of the wheel.
This ensures the central hub of each Smart Wheel locks in place
and does not free-wheel.
Once both wheels are connected in the same manner they will
be able to drive the buggy.
1300 650 059 | concoursegolf.com 10
1300 650 059 | concoursegolf.com User Instruction Manual | Version 3.0
1 2
LOCKED IN POSITION
3
PLEASE NOTE:
THE LOCKING PINS WILL SUIT EITHER SIDE OF THE BUGGY.
Andere Handbücher für SMART WHEELS
4
Inhaltsverzeichnis
Beliebte Roller Handbücher anderer Marken
First Choice Mobility
First Choice Mobility Roma Medical Corella S741 Bedienungsanleitung
Carrera
Carrera impel Bedienungsanleitung
Afikim
Afikim Superlight SL-3 Bedienungsanleitung
CareCo
CareCo ZOOM Bedienungsanleitung
Douglas
Douglas Vespa G.S. Bedienungsanleitung
Gazelle
Gazelle with BOSCH System Bedienungsanleitung