CONDTROL XP4 PRO Bedienungsanleitung

PROFESSIONAL

XP4

PRO

Руководство по эксплуатации

User manual

Bedienungsanleitung

XP4 PRO CONDTROL

INTENDED USE 4

SET 4

TECHNICAL SPECIFICATIONS 4

PRODUCT DESCRIPTION 6

OPERATION 7

MEASUREMENTS 9

CALCULATIONS 14

MESSAGE CODES 25

SAFETY REGULATIONS 26

CARE AND MAINTENANCE 27

UTILIZATION 27

WARRANTY 28

EN CONTENT

BESTIMMUNGSGEMÄSSER GEBRAUCH 29

LIEFERUMFANG 29

TECHNISCHE DATEN 29

PRODUKTBESCHREIBUNG 31

GERÄTEBEDIENUNG 32

MESSUNGEN 35

BERECHNUNGEN 39

FEHLERCODES 50

SICHERHEITSHINWEISE 51

PFLEGE 52

ENTSORGUNG 52

GARANTIE 52

WARTUNG UND REPARATUR 53

DE INHALT

XP4 PRO CONDTROL

НАЗНАЧЕНИЕ ПРИБОРА 54

КОМПЛЕКТАЦИЯ 54

ТЕХНИЧЕСКИЕ ХАРАКТЕРИСТИКИ 54

ОПИСАНИЕ ПРИБОРА 56

РАБОТА С ПРИБОРОМ 57

ИЗМЕРЕНИЯ 60

ВЫЧИСЛЕНИЯ 64

КОДЫ СООБЩЕНИЙ 75

УКАЗАНИЯ ПО ТЕХНИКЕ БЕЗОПАСНОСТИ 76

УХОД И ЭКСПЛУАТАЦИЯ 76

УТИЛИЗАЦИЯ 77

ГАРАНТИЙНЫЕ ОБЯЗАТЕЛЬСТВА 78

RU

User manual

LASER DISTANCE METER

XP4 PRO CONDTROL

Congratulations on your purchase of laser distance meter CONDTROL XP4 PRO.

Safety instructions can be found in the end of this user manual and should be

carefully read before you use the product for the first time.

INTENDED USE

Laser distance meter XP4 PRO is intended to measure distance, to stake out a line,

to calculate area and volume of measured objects as well as perform calculations

by tilt sensor and Pythagoras’ Theorem and able to transmit measuring results

via Bluetooth. The product is suitable for use at both indoor and outdoor building

areas.

SET

1. Laser distance meter– 1pc.

2. Carry pouch with a strap - 1 pc.

3. User manual – 1 pc.

4. Batteries (AAA) – 3 pcs.

5. Charging cable – 1 pc.

TECHNICAL SPECIFICATIONS

Working range* 0,05– 150 m

Measuring accuracy ** ± 1,5 mm

Smallest unit displayed 1 mm

Automatic shutdown

- Laser

- Instrument

Adjustable in menu

Display backlight +

Reference point setting +

Continuous measurement (tracking) +

Max./min. value +

Addition/subtraction +

Area/ wall surface/volume/triangle area/

trapezium area +

Addition/subtraction of areas/volumes +

Calculations by tilt sensor +

User manual

LASER DISTANCE METER

XP4 PRO CONDTROL

Calculations by Pythagoras’ Theorem +

Stake-out function +

Digital viewfinder +

Bluetooth +

Digital vial +

Timer +

Memory up to 50 values

Laser type Class II, 635 nm, power <1 mW

Working temperature –10 °С ... +50 °С

Storage temperature –20 °С ... +60 °С

Dust and water protection IP54

Dimensions 136х59х28 mm

Weight 170 g

Power supply 3 х battery AAA 800 mAh

1,2V Ni-MH

* Use a reflector to increase the measurement range during daylight or if the

target has poor reflection properties.

** Accuracy can decrease in unfavorable conditions, such as intense sunshine or

when measurements are made against glossy or transparent surfaces, moving

objects, objects with rough surface.

In unfavourable conditions or when measured distance is over 100 m the

maximum permissible accuracy is calculated in the following way:

± (Y + 0,25хDх10-3) mm, where

D (mm) - measured distance

Y (mm) - permissible accuracy according to technical data.

User manual

LASER DISTANCE METER

XP4 PRO CONDTROL

1315 6

11 12

1. Display

2. Keyboard

3. Turn on the product/turn

on laser beam/single distance

measurement/continuous

measurement

4. Addition/up/increase the value/

flip through measuring results in

memory (forward)

5. Subtraction/down/decrease

the value/flip through measuring

results in memory (backwards)

6. Menu/choose menu option/

activate setting of menu function/

scroll measuring results down

7. Area/volume/triangle area/

trapezium area

8. Calculations by tilt sensor and

Pythagoras’ Theorem

9. Timer/reference point setting

10. Memory/digital vial

11. Bluetooth/stake-out function

12. Digital viewfinder

13. Turn off the product / clear/

exit menu/exit mode

14. Strap location

15. End-piece

16. Type-C charging port

PRODUCT DESCRIPTION

User manual

LASER DISTANCE METER

XP4 PRO CONDTROL

Display

1. Main line

2. Additional lines

3. Mode indicator

4. Charge level indicator

5. Unit of measurement

6. Laser beam indicator

7. Reference point

OPERATION

Install/charge batteries

Insert batteries observing correct polarity. Use nickel metal-hydride batteries.

Charge level is shown on display. Charge batteries when symbol appears on

the display. Use USB charger delivered in the set.

Don’t use the product while charging.

It takes approximately 4 hours to fully charge the batteries.

Turn on/off

Turn on: press .

Turn off: press and hold for 1 second.

Turn on: press .

User manual

LASER DISTANCE METER

XP4 PRO CONDTROL

Menu navigation

Press Enter menu

Display backlight timer

Automatic shutdown of laser

beam

Automatic shutdown of the

product

Turn on/off sound signal

Measuring unit

Measuring unit of angle

Press or Choose menu option

Press Confirm the choice

Press or Menu option setting*

Press Confirm the setting

Press Exit menu

* If press and hold or the speed is increased.

User manual

LASER DISTANCE METER

XP4 PRO CONDTROL

Reference point setting

Press and hold

for 1 sec.

Change reference point

Appropriate image appears on the

display.

Front

Tripod

Rear

End-piece

MEASUREMENTS

Single distance measurement

Press Turn on the product.

Press Turn on laser beam. Aim the product at measured

object.

User manual

LASER DISTANCE METER

1010

XP4 PRO CONDTROL

Press Take measurement.

– measuring result

Press Delete the last measuring result.

Continuous measurement (tracking)

Press and hold

for 1 sec.

Activate continuous measurement (tracking)

function. Laser beam turns on simultaneously.

The product will take measurements one after

another, showing the last measured value. Besides it

will show maximal and minimal measured values.

– maximal value

– minimal value

– difference between maximal and minimal values

– current value

Press or Stop taking measurements. The last measured values

are shown on the display .

Press or

Andere Handbücher für XP4 PRO

Inhaltsverzeichnis

Sprachen:

Andere CONDTROL Messgerät Handbücher

CONDTROL

CONDTROL Auto RotoLaser Bedienungsanleitung

CONDTROL

CONDTROL WheelPRO Bedienungsanleitung

CONDTROL

CONDTROL NEO G200 Bedienungsanleitung

CONDTROL

CONDTROL NEO X200 Bedienungsanleitung

CONDTROL

CONDTROL Wheel Bedienungsanleitung

CONDTROL

CONDTROL xMarker Bedienungsanleitung

CONDTROL

CONDTROL Paint PRO Bedienungsanleitung

CONDTROL

CONDTROL Vector 100 Bedienungsanleitung

CONDTROL

CONDTROL Ranger 3 Bedienungsanleitung

CONDTROL

CONDTROL Wheel Bedienungsanleitung

CONDTROL

CONDTROL MicroX Bedienungsanleitung

CONDTROL

CONDTROL Qb Bedienungsanleitung

CONDTROL

CONDTROL NEO X1-360 Bedienungsanleitung

CONDTROL

CONDTROL Laser 3D CONDTROL Bedienungsanleitung

CONDTROL

CONDTROL GFX 200 Bedienungsanleitung

CONDTROL

CONDTROL Qb Bedienungsanleitung

CONDTROL

CONDTROL XLiner Duo Bedienungsanleitung

CONDTROL

CONDTROL Digi Staff Bedienungsanleitung

CONDTROL

CONDTROL Vector 30 Bedienungsanleitung

CONDTROL

CONDTROL XP3 Bedienungsanleitung

CONDTROL

CONDTROL Auto RotoLaser Bedienungsanleitung

CONDTROL

CONDTROL NEO G220 Bedienungsanleitung

CONDTROL

CONDTROL XS Bedienungsanleitung

CONDTROL

CONDTROL Beton Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung