Craftsman ASF 486.246213 Bedienungsanleitung

Owner's Manual

I:RRFrSMRH°

TRACTOR BRUSH GUARD

DO NOT RETURN TO STORE

For Missing Parts or Assembly

Questions Call 1-866-576-8388

Model No's. 486.246213, 486.246222 & 486.246232

CAUTION:

Before using this product, read

this manual and follow all Safety

Rules and Operating Instructions.

,, Safety

,, Assembly

,, Operation

,, Maintenance

,, Parts

Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.

www.sears.com/craftsman

PRINTED IN U.S.A. FORM NO. 40865 (09/04/07)

WARRANTY _)

ONE YEAR LIMITED WARRANTY

When operated and maintained according to the instructions

supplied with it, ifthis Tractor Brush Guard fails due to a defect

in material or workmanship within one year from the date of

purchase, call 1-800-4-MY-HOME®to arrange for free repair.

If this product is used for commercial or rentaJ purposes, this

warranty applies for only 90 days from the date of purchase.

This warranty gives you specific legal rights, and you may aJso

have other rights which vary from state to state.

C SAFETY

Any power equipment can cause injury if operated

improperly or if the user does not understand how to

operate the equipment. Exercise caution at all times,

when using power equipment.

oRefer to your tractor owners manual for "Rules For

Safe Operation".

Look for this symbol to point out important safety

precautions. It means -- AttentionH Become

aerr !Your safety s nvo veal.

Sears, Roebuck and Co., D817WA, Hoffman Estates, IL

60179

TOOLS REQUIRED

(2) 9/16" Wrenches

(1) 1/2" Wrench (for heat shield on page 5)

CARTON CONTENTS

REF PART NO. QT_

1 25038 1

2 25037 1

3 64862 2

4 64614B 1

64614S 1

64614C 1

BEFORE YOU BEGIN

CARTON CONTENTS

DESCRIPTION

Right Mounting Bracket

Left Mounting Bracket

Locking Lever

Bumper (71-246213)

Bumper (71-246222)

Bumper (71-246232)

C DETERMINE IFYOUR TRACTOR HAS ASINGLE SUSPENSION BRACKET -"_

OR DUAL SUSPENSION BRACKETS ,

SINGLE SUSPENSION DUAL SUSPENSION BRACKETS

BRACKET

SUSPENSION

BRACKET

FIGURE 1A (page 3)

SUSPENSION BRACKET SUSPENSION

Look under the front of your tractor (Figure 1A & 1B). Ifthere is a single mower deck suspension bracket located underneath

the middle of the front axle, continue on to INSTRUCTIONS FOR SINGLE SUSPENSION BRACKET TRACTORS on

page 3. If your tractor does not have a mower deck suspension bracket underneath the middle of the front axle, skip to

INSTRUCTIONS FOR DUAL SUSPENSION BRACKET TRACTORS on page 5.

2 Call 1-866-576-8388 for missing parts or assembly help

DO NOT RETURN TO STORE

BRACKET

FIGURE 1B (page 5)

iNSTRUCTiONS FOR SINGLE SUSPENSION BRACKET TRACTORS

STEP 1 : (SEE FIGURE 2)

Open parts bag labelled "A" and verify that all parts are

present.

NOTE: Place cardboard or a mat on work surface to prevent

scratching of parts removed from carton and tractor.

CAUTION! Muffler is hot! Allow engine to

cool down before proceeding with bumper

installation.

NOTE: Right hand (RH) and left hand (LH) are

determined from the operator's position while seated on

the tractor.

SHOWN FULL SiZE

PARTS BAG "A"

.... D

"1 I

...... F

NOT SHOWN

FULL SIZE

FIGURE 2

STEP 2: (SEE FIGURE 3)

Remove hood from tractor using instructions in your

tractor owner's manual. Place hood on cardboard or

on a mat to protect paint.

Remove the browning shield from the front of the

tractor as shown.

IMPORTANT: Be sure to reattach the browning shield

after bumper is installed.

REF PART NO. QTY. DESCRIPTION

A 43350 2 Carriage Bolt, 3/8-16 x 1"

B 43062 2 Hex Bolt, 3/8-16 x 1-1/2"

C 44072 4 Whizlock Nut, 3/8"

D 44742 4 Plug

E 48866 2 Pivot Spacer

F 1643-60 2 Plastic Grip

REMOVE

FRONTSCREWS

REMOVE

BROWNING SHIELD

FIGURE 3

Catt1-866-576-8388formissingpartsorassemblyhelp 3

DO NOT RETURN TO STORE

STEP 3: (SEE FIGURE 4)

• Place plug (D) on a work bench or solid table and

push end of bumper down onto plug. Repeat for all

four plugs.

STEP 4: (SEE FIGURE 5)

• Attach ]eft mounting bracket to hole shown in ]eft side

of tractor frame using a carriage bolt (A) and whizlock

nut (C). Align middle hole in bracket with empty hole

in tractor frame. Tighten whizlock nut (C) only enough

to keep bracket in alignment until step 5. Repeat for

right mounting bracket.

STEP 5: (SEE FIGURE 6)

• Fasten bumper to mounting bracket using a hex bolt

(B), pivot spacer (E), a locking lever and a whizlock

nut (C) as shown. The pivot spacer inserts into hole in

bumper. Tighten both nuts on mounting bracket at

this time. Repeat for other side.

• Assemble plastic grips (F) onto locking levers.

• Lift up on bumper until pins in locking levers snap into

holes in mounting brackets.

IMPORTANT: You must lower bumper before raising tractor

hood. Pull out on locking levers and push bumper down as

far as it will go.

BUMPER

PUSH DOWN

WITH EVEN

PRESSURE

WORK BENCH

OR SOLID TABL__

(GT) FRAME SHOWN

CARRIAGE LEFT MOUNTING

BUMPER STOPS BOLT (A) BRACKET

FACE OUT .......... WHIZLOCK

NUT (C)

AUGNTRESEROLES

LEFT SIDE VIEW FIGURE 5

HEX BOLT (B) WHIZLOCK_-

(C)

PIVOT

SPACER (E)_

STEP 6: (SEE FIGURE 7)

• Replace the front screws and browning shield you

removed in Step 2 as shown.

LEVER

FIGURE 6

GRIP (F)

LEFT SIDE VIEW

REPLACE

FRONT SCREWS

REPLACE

BROWNING SHIELD

FIGURE 7 LEFT SIDE VIEW

4 Call 1-866-576-8388 for missing parts or assembly help

DO NOT RETURN TO STORE

INSTRUCTIONS FOR DUAL SUSPENSION BRACKET TRACTORS

STEP 1 : (SEE FIGURE 2)

Open parts bags labelled "A" and "B" and verify that all

parts are present.

NOTE: Place cardboard or a mat on work surface to prevent

scratching of parts removed from carton and tractor.

CAUTION! Muffler is hot! Allow engine to

cool down before proceeding with bumper

installation.

NOTE: Right hand (RH) and left hand (LH) are

determined from the operator's position while seated on

the tractor.

SHOWN FULL SiZE

PARTS BAG "B" EXCEPT WHERE NOTED

(parts bag "A")

(parts bag "A") FIGURE 2

REF PART NO. QT_

A 48894 2

B 43062 2

C 43001 2

D 48866 2

E 1643-60 2

F 43003 4

G 43070 4

H 44742 4

DESCRiPTiON

SelfThreadingScrew,3/8-16x 1-1/2"

Hex Bolt, 3/8-16 x 1-1/2"

Hex Bolt, 3/8-16 x 1"

Pivot Spacer

Plastic Grip

Lock Washer, 3/8"

Washer, 3/8"

Plug

STEP 2: (SEE FIGURE 3)

Remove tractor hood. (Refer to tractor manual.) Place

hood on cardboard or on a mat to protect paint.

If you have an (LT) Lawn Tractor with a heat shield

like the one shown, remove the heat shield.

iMPORTANT: Be sure to re-attach the heat shield after

bumper is installed.

Catt 1-866-576-8388 for missing parts or assembly help

DO NOT RETURN TO STORE

(LT) LAWN TRACTOR

......... -----1 MUFFLER HEATSHIELD

)

FIGURE 3

STEP 3: (SEE FIGURE 4)

• Place plug (H) on a work bench or solid table and

push end of bumper down onto plug. Repeat for all

four plugs.

BUMPER

PUSH DOWN

WITH EVEN

PRESSURE

WORK BENCH

OR SOLIDTABLE _/PLUG (H)

FIGURE 4

STEP 4: (SEE FIGURE 5)

IMPORTANT: Do not remove any bolts from the tractor

frame while the mower deck is raised. Misalignment of

holes in frame could result.

Lower mower deck to rest on ground.

Remove bolts from mounting holes on both sides of

tractor frame. Use a mounting bracket to help identify

holes.

(LT) LAWN TRACTOR

REMOVE BOLT

IF PRESENT

SUSPENSION BRACKET

(LT) LAWN TRACTOR

REMOVE BOLT

IF PRESENT

JSUSPENSION

BRACKET

(GT) GARDEN TRACTOR

REMOVE BOLT

IF PRESENT

SUSPENSION BRACKET

FIGURE 5

6 Call 1-866-576-8388 for missing parts or assembly help

DO NOT RETURN TO STORE

STEP 5: (SEE FIGURE 6)

• Attach left mounting bracket to hole shown in ]eft

side of tractor frame using bolt (C), lock washer (F)

and flat washer (G). Align middle hole in bracket

with empty hole in tractor frame and tighten bolt (C)

to hold bracket in place. Repeat for right mounting

bracket.

(GT) FRAME SHOWN

LEFT MOUNTING FLAT

BRACKET WASHER

(G)

ATTACH TO

THiS HOLE

BUMPER STOPS

FACE OUT

LOCK

WASHER

(F)

BOLT

(C)

LEFT SiDE ViEW ALIGN THESE HOLES

FIGURE 6

STEP 6: (SEE FIGURES 7 & 8)

• Assemble plastic grips (E) onto locking levers.

To attach bumper to tractor:

1. Place flattened ends of bumper onto mounting

brackets. Insert pin of locking lever through front

hole in bumper and into front hole in mounting

bracket to support bumper on mounting bracket.

2. Insert pivot spacers (D) into rear holes in bumper.

PIVOT

SPACER

(D)

LEFT SIDE VIEW

GRiP (E)

FIGURE 7

,Fasten locking lever and bumper to mounting bracket

using a screw (A) or bolt (B), a lock washer (F) and a

flat washer (G). Use screw (A) for LT tractors and bolt

(B) for GT tractors. Assemble screw or bolt through

pivot spacer in rear hole in bumper and into tractor

frame. Tighten. Repeat for other side.

NOTE: If hole in (LT) tractor frame is not threaded, push

in while turning screw (A) to create threads in hole.

IMPORTANT: You must lower bumper before raising tractor

hood. Pull out on locking levers and push bumper down as

far as it will go.

LEFT SIDE VIEW

FLAT

WASHER(G)

BOLT (B)

FIGURE 8

Catt 1-866-576-8388 for missing parts or assembly help 7

DO NOT RETURN TO STORE

Your Home

For repair - in your home - of all major brand appliances,

lawn and garden equipment, or heating and cooling systems,

no matter who made it, no matter who sold it !

For the replacement parts, accessories and

owner's manuals that you need to do-it-yourself.

For Sears professional installation of home appliances

and items like garage door openers and water heaters.

1-800-4-MY-HOME ® (1-800-469-4663)

Call anytime, day or night (U.S.A. and Canada)

www.sears.com www.sears.ca

For expert home solutions advice: www.managemyhome.com

Our Home

For repair of carry-in items like vacuums, lawn equipment,

and electronics, call or go on-line for the location of your nearest

Sears Parts & Repair Service Center

1-800-488-1222 (U.S.A.) 1-800-469-4663 (Canada)

Call anytime, day or night

www.sears.com www.sears.ca

To purchase a protection agreement on a product serviced by Sears:

1-800-827-6655 (U.S.A.) 1-800-361-6665 (Canada)

Para pedir servicio de reparaci6n Au Canada pour service en frangais:

a domicilio, y para ordenar piezas: 1-800-LE-FOYER M°

1-888-SU-HOGAR ® (1-800-533-6937)

(1-888-784-6427) www.sears.ca

TM SM

® Registered Trademark / ' Trademark /_Service Mark of Sears Brands, LLC

® Marca Registrada /TM Marca de F&brica /sMMarca de Servicio de Sears Brands, LLC

Mc Marque de commerce /_,TDMarque d_posCe de Sears Brands, LLC ® Sears Brands, LLC

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Craftsman Zubehör Handbücher

Craftsman

Craftsman 358.792401 Bedienungsanleitung

Craftsman

Craftsman Door Kit Bedienungsanleitung

Craftsman

Craftsman 240.74295 Bedienungsanleitung

Craftsman

Craftsman 486.24586 Bedienungsanleitung

Craftsman

Craftsman 358.792421 Bedienungsanleitung

Craftsman

Craftsman 486.24608 Bedienungsanleitung

Craftsman

Craftsman Floor Cabinet Bedienungsanleitung

Craftsman

Craftsman 139.53784 Bedienungsanleitung

Craftsman

Craftsman 875.59750 Bedienungsanleitung

Craftsman

Craftsman 486.24275 Bedienungsanleitung

Craftsman

Craftsman 316.792410 Bedienungsanleitung

Craftsman

Craftsman 292660 Bedienungsanleitung

Craftsman

Craftsman 509347 Bedienungsanleitung

Craftsman

Craftsman 358.792440 Bedienungsanleitung

Craftsman

Craftsman Trimmer Products Bedienungsanleitung

Craftsman

Craftsman 486.244122 Bedienungsanleitung

Craftsman

Craftsman 320.16495 Bedienungsanleitung

Craftsman

Craftsman 358.792442 Bedienungsanleitung

Craftsman

Craftsman 183.287660 Kurzanleitung zur Einrichtung

Craftsman

Craftsman 486.246212 Bedienungsanleitung

Craftsman

Craftsman 113.29931 Bedienungsanleitung

Craftsman

Craftsman 139.53724 Bedienungsanleitung

Craftsman

Craftsman CMXZDCG480 Bedienungsanleitung

Craftsman

Craftsman 152.298890 Bedienungsanleitung

Beliebte Zubehör Handbücher anderer Marken

Hillco

Hillco 2810 Bedienungsanleitung

Siemens

Siemens QSA2700D Bedienerhandbuch

Contours

Contours ZY024 Bedienungsanleitung

Saivod

Saivod VS621 Bedienungsanleitung

Virtuox

Virtuox VirtuCLEAN 2.0 Bedienungsanleitung

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Bedienungsanleitung

Z-Wave

Z-Wave HSD-200Z Bedienungsanleitung

turck

turck FMX-IM-2UPLI63FX Bedienungsanleitung

Decagon Devices

Decagon Devices 10HS Bedienungsanleitung

UPPAbaby

UPPAbaby Cup Holder Bedienungsanleitung

Elko

Elko SmartSensor Leakage Wireless Bedienungsanleitung

Grizzly

Grizzly H8371 Bedienungsanleitung

Panasonic

Panasonic HG-T Series Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 250 Series Referenzhandbuch

DigiDesign

DigiDesign 888/24 I/O Bedienungsanleitung

PROZIS

PROZIS QUAY Bedienungsanleitung

patagonia

patagonia PSI Vest Bedienungsanleitung

SFC Energy

SFC Energy EFOY GO! Bedienungsanleitung