Craftsman 944.361420 Bedienungsanleitung

Model No.

944.361420

CAUTION:

Read and follow all

Safety Rules and Instructions

before operating this equipment

Owner’s Manual

6.0 HORSEPOWER

21" MULTI-CUT

POWER PROPELLED

ROTARY LAWN MOWER

• Safety

• Assembly

• Operation

• Maintenance

• Repair Parts

Sears Canada, Inc., Toronto, Ontario M5B 2B8

178400 Rev. 1 04.13.01 BY Printed in U.S.A.

Warranty ............................................... 2

Safety Rules ..................................... 2-4

Assembly .......................................... 4-5

Operation ........................................ 6-10

Maintenance Schedule ...................... 11

Maintenance ................................. 11-14

Product Specifications ........................ 12

Service and Adjustments .................... 15

Storage ......................................... 16-17

Troubleshooting ........................... 17-18

Repair Parts .................................. 19-29

Parts Ordering ..................... Back Cover

SAFETY RULES

WARRANTY

TABLE OF CONTENTS

LIMITED TWO YEAR WARRANTY ON CRAFTSMAN POWER MOWER

For Two years from date of purchase Sears Canada, Inc. will repair or replace at Sears

option free of charge parts which are defective as a result of material or workmanship.

COMMERCIAL OR RENTAL USE:

Warranty on Power Mower (Gas) will be ninety (90) days from date of purchase if used

for commercial or rental purposes.

This Warranty does NOT cover:

•Pre-delivery set-up.

•Expendable items which become worn during normal use, such as rotary mower

blades, blade adapters, belts, air cleaners and spark plug.

•Repairs necessary because of operator abuse or negligence, including bent

crankshafts and the failure to maintain the equipment according to the instructions

contained in the owner’s manual.

Warranty service is available by returning the Craftsman Power Mower to the nearest

Sears Service Centre/Department in Canada. This warranty applies only while this

product is in use in Canada.

This warranty is in addition to any statutory warranty and does not exclude or limit

legal rights you may have but shall run concurrently with applicable provincial

legislation. Furthermore, some provinces do NOT allow limitation on how long an

implied warranty will last so the above limitations may not apply to you.

SEARS CANADA, INC., TORONTO, ONTARIO M5B 2B8

I. GENERAL OPERATION

•Read, understand, and follow all

instructions on the machine and in the

manual(s) before starting. Be thor-

oughly familiar with the controls and

the proper use of the machine before

starting.

•Do not put hands or feet near or under

rotating parts. Keep clear of the

discharge opening at all times.

•Only allow responsible individuals,

who are familiar with the instructions, to

operate the machine.

•Clear the area of objects such as

rocks, toys, wire, bones, sticks, etc.,

which could be picked up and thrown

by the blade.

•Be sure the area is clear of other

people before mowing. Stop machine if

anyone enters the area.

•Do not operate the mower when

barefoot or wearing open sandals.

Always wear substantial foot wear.

•Do not pull mower backwards unless

absolutely necessary. Always look

down and behind before and while

moving backwards.

•Do not operate the mower without

proper guards, plates, grass catcher or

other safety protective devices in place.

•See manufacturer’s instructions for

proper operation and installation of

accessories. Only use accessories

approved by the manufacturer.

•Stop the blade(s) when crossing gravel

drives, walks, or roads.

•Stop the engine (motor) whenever you

leave the equipment, before cleaning

the mower or unclogging the chute.

IMPORTANT: This cutting machine is capable of amputating hands and feet and

throwing objects. Failure to observe the following safety instructions could result in

serious injury or death.

SERVICE NOTES

•Shut the engine (motor) off and wait

until the blade comes to complete stop

before removing grass catcher.

•Mow only in daylight or good artificial

light.

•Do not operate the machine while

under the influence of alcohol or drugs.

•Never operate machine in wet grass.

Always be sure of your footing: keep a

firm hold on the handle and walk; never

run.

•Disengage the self-propelled mecha-

nism or drive clutch on mowers so

equipped before starting the engine

(motor).

•If the equipment should start to vibrate

abnormally, stop the engine (motor)

and check immediately for the cause.

Vibration is generally a warning of

trouble.

•Always wear safety goggles or safety

glasses with side shields when

operating mower.

II. SLOPE OPERATION

Slopes are a major factor related to slip

and fall accidents which can result in

severe injury. All slopes require extra

caution. If you feel uneasy on a slope, do

not mow it.

DO:

•Mow across the face of slopes: never

up and down. Exercise extreme caution

when changing direction on slopes.

•Remove obstacles such as rocks, tree

limbs, etc.

•Watch for holes, ruts, or bumps. Tall

grass can hide obstacles.

DO NOT:

•Do not trim near drop-offs, ditches or

embankments. The operator could lose

footing or balance.

•Do not trim excessively steep slopes.

•Do not mow on wet grass. Reduced

footing could cause slipping.

III. CHILDREN

Tragic accidents can occur if the operator

is not alert to the presence of children.

Children are often attracted to the

machine and the mowing activity.

Never

assume that children will remain where

you last saw them.

•Keep children out of the trimming area

and under the watchful care of another

responsible adult.

•Be alert and turn machine off if children

enter the area.

•Before and while walking backwards,

look behind and

down

for small

children.

•Never allow children to operate the

machine.

•Use extra care when approaching blind

corners, shrubs, trees, or other objects

that may obscure vision.

IV. SERVICES

•Use extra care in handling gasoline

and other fuels. They are flammable

and vapors are explosive.

- Use only an approved container.

- Never remove gas cap or add fuel

with the engine running. Allow engine

to cool before refueling. Do not

smoke.

- Never refuel the machine indoors.

- Never store the machine or fuel

container inside where there is an

open flame, such as a water heater.

•Never run a machine inside a closed

area.

•Never make adjustments or repairs

with the engine (motor) running.

Disconnect the spark plug wire, and

keep the wire away from the plug to

prevent accidental starting.

•Keep nuts and bolts, especially blade

attachment bolts, tight and keep

equipment in good condition.

•Never tamper with safety devices.

Check their proper operation regularly.

•Keep machine free of grass, leaves, or

other debris build-up. Clean oil or fuel

spillage. Allow machine to cool before

storing.

•Stop and inspect the equipment if you

strike an object. Repair, if necessary,

before restarting.

•Never attempt to make wheel height

adjustments while the engine (motor) is

running.

•Grass catcher components are subject

to wear, damage, and deterioration,

which could expose moving parts or

allow objects to be thrown. Frequently

check components and replace with

manufacturer’s recommended parts,

when necessary.

•Mower blades are sharp and can cut.

Wrap the blade(s) or wear gloves, and

use extra caution when servicing them.

•Do not change the engine governor

setting or overspeed the engine.

SERVICE NOTES

ASSEMBLY

Read these instructions and this manual

in its entirety before you attempt to

assemble or operate your new lawn

mower.

IMPORTANT: This lawn mower is

shipped WITHOUT OIL OR GASOLINE in

the engine.

Your new lawn mower has been as-

sembled at the factory with the exception

of those parts left unassembled for

shipping purposes. All parts such as

nuts, washers, bolts, etc., necessary to

complete the assembly have been placed

in the parts bag. To ensure safe and

proper operation of your lawn mower, all

parts and hardware you assemble must

be tightened securely. Use the correct

tools as necessary to ensure proper

tightness.

Look for this symbol to point out

important safety precautions. It means

CAUTION!!! BECOME ALERT!!! YOUR

SAFETY IS INVOLVED.

CAUTION: Always disconnect spark

plug wire and place wire where it cannot

contact spark plug in order to prevent

accidental starting when setting up,

transporting, adjusting or making repairs.

CAUTION: Muffler

and other engine parts

become extremely hot

during operation and

remain hot after engine

has stopped. To avoid

severe burns on contact,

stay away from these

areas.

TO REMOVE LAWN MOWER FROM

CARTON

1. Remove loose parts included with

mower.

2. Cut down two end corners of carton

and lay end panel down flat.

3. Remove all packing materials except

padding between upper and lower

handle and padding holding operator

presence control bar to upper handle.

4. Roll lawn mower out of carton and

check carton thoroughly for additional

loose parts.

MODEL NUMBER 12H802-2389-B1

BRIGGS & STRATTON 4-CYCLE ENGINE

KEY PART

NO. NO. DESCRIPTION

332 690662 Nut (Flywheel)

333 802574 Armature-Magneto

334 691061 Screw (Armature Magneto)

337 802592 Spark Plug

356 692390 Wire-Stop

358 497316 Engine Gasket Set

363 19069 Flywheel Puller

365 692524 Screw (Carburetor)

383 89838 Wrench-Spark Plug

404 690272 Washer (Governor Crank)

425 690670 Screw (Air Cleaner Cover)

443 692523 Screw (Air Cleaner Primer Base)

445 491588 Filter-Air Cleaner Cartridge

455 695161 Cup-Flywheel

456 692299 Plate-Pawl Friction

459 281505 Pawl-Ratchet

505 231082 Nut (Governor Control Lever)

523 495264 Dipstick

524 692296 •Seal-Dipstick Tube

525 495265 Tube-Dipstick

529 691923 Grommet

562 92613 Bolt (Governor Control Lever)

584 692342 Cover-Breather Passage

585 691879 •Gasket-Breather Passage

592 690800 Nut (Rewind Starter)

597 691696 Screw (Pawl Friction Plate)

601 95162 Clamp-Hose

608 497680 Starter-Rewind

613 691340 Screw (Muffler)

615 690340 Retainer-Governor Shaft

616 691308 Crank-Governor

617 270344 •Ø‡Seal-O Ring (Intake Manifold)

621 692310 Switch-Stop

633 691321 Ø‡ Seal-Choke/Throttle Shaft

635 66538 Boot-Sparkplug

668 493823 •Spacer (Includes 2)

670 692294 Spacer-Fuel Tank

684 690345 Screw (Breather Passage Cover)

689 691855 Spring-Friction

741 691830 Gear-Timing

KEY PART

NO. NO. DESCRIPTION

745 691648 Screw (Brake)

842 691031 •Seal-O Ring (Dipstick Tube)

847 692017 Assembly-Dipstick/Tube

851 493880 Terminal-Sparkplug

869 691155 Seat-Valve (Intake)

870 690380 Seat-Valve (Exhaust)

871 262001 Bushing-Guide (Exhaust)

63709 Bushing-Guide (Intake)

921 695889 Cover-Blower Housing

922 692135 Spring-Brake

923 695891 Brake

957 397974 Cap-Fuel Tank

966 496116 Base-Air Cleaner Primer

968 692298 Cover-Air Cleaner

969 691138 Screw (Blower Housing Cover)

970 691669 Screw (Air Cleaner Primer Bracket)

972 495224 Tank-Fuel

975 493640 Bowl-Float

976 694395 Primer-Carburetor

977 498261 Set-Carburetor Gasket

1019 494256 Kit-Label

1036 695111 Label-Emissions

1059 692311 Kit-Screw/Washer

1095 498528 Set-Valve Gasket

1210 498144 Assembly-Pulley/Spring (Pulley)

1211 498144 Assembly-Pulley/Spring (Spring)

RPM Settings: Low Speed: 1900-2100

High Speed: 3000-3200

•Included in Engine Gasket Set, Key No. 358

ØIncluded in Carburetor Overhaul Kit, Key No. 121

‡Included in Carburetor Gasket Set, Key No. 977

+ Included in Valve Overhaul Kit, Key No. 1095

NOTE: All component dimensions given in U.S.

inches. 1 inch = 25.4 mm

TO INSTALL ATTACHMENTS

Your lawn mower was shipped ready to

be used as a mulcher. To convert to

bagging or discharging, see "TO CON-

VERT MOWER" in the Operation section

of this manual.

TO ASSEMBLE GRASS CATCHER

1. Put grass catcher frame into grass bag

with rigid part of bag on the bottom.

Make sure the frame handle is outside

of the bag top.

2. Slip vinyl bindings over frame.

NOTE: If vinyl bindings are too stiff, hold

them in warm water for a few minutes. If

bag gets wet, let it dry before using.

CAUTION: Do not run your lawn

mower without clipping deflector or

approved grass catcher in place. Never

attempt to operate the lawn mower with

the rear door removed or propped open.

HOWTO SET UPYOUR LAWN

MOWER

TO UNFOLD HANDLE

IMPORTANT: Unfold handle carefully so

as not to pinch or damage control cables.

1. Raise handles until lower handle

section locks into place in mowing

position.

2. Remove protective padding, raise

upper handle section into place on

lower handle and tighten both handle

knobs.

3. Remove handle padding holding

operator presence control bar to

upper handle.

Your lawn mower handle can be adjusted

for your mowing comfort. Refer to "AD-

JUST HANDLE" in the Service and

Adjustments section of this manual.

Lift up

Operator presence

control bar

Upper handle

Mowing

position

Lift up

Lower handle

Catcher

frame

handle

Vinyl

bindings

Frame

opening

MODEL NUMBER 12H802-2389-B1

BRIGGS & STRATTON 4-CYCLE ENGINE

KEY PART

NO. NO. DESCRIPTION

1 493260 Cylinder Assembly

2 399269 Kit-Bushing/Seal

3 299819 •Seal-Oil (Magneto Side)

4 493279 Sump-Engine

5 691160 Head-Cylinder

7 692249 •+ Gasket-Cylinder Head

8 695250 Breather Assembly

9 272481 •+ Gasket-Breather

10 691125 Screw (Breather Assembly)

11 691781 Tube-Breather

12 692232 •Gasket-Crankcase

13 690912 Screw (Cylinder Head)

15 691680 Plug-Oil Drain

16 691451 Crankshaft

20 399781 •Seal-Oil (PTO Side)

22 691092 Screw (Engine Sump)

23 692315 Flywheel

24 222698 Key-Flywheel

25 499429 Piston Assembly (Standard)

499430 Piston Assembly (.010”O.S.)

499431 Piston Assembly (.020" O.S.)

499432 Piston Assembly (.030" O.S.)

26 499425 Ring Set-Piston (Standard)

499426 Ring Set-Piston (.010”O.S.)

499427 Ring Set-Piston (.020”O.S.)

499428 Ring Set-Piston (.030”O.S.)

27 691866 Lock-Piston Pin

28 499423 Pin-Piston

29 499424 Rod-Connecting

32 691664 Screw (Connecting Rod)

32A 695759 Screw (Connecting Rod)

33 262651 Valve-Exhaust

34 262652 Valve-Intake

35 691270 Spring-Valve (Intake)

36 691270 Spring-Valve (Exhaust)

40 692194 Retainer-Valve

43 691997 Slinger-Governor/Oil

45 690548 Tappet-Valve

46 691449 Camshaft

KEY PART

NO. NO. DESCRIPTION

48 498826 Short Block (Replacement Engine

12J802-2915-B1)

50 497465 Manifold-Intake

51 272199 •Gasket-Intake

54 691650 Screw (Intake Manifold)

55 691421 Housing-Rewind Starter

58 692259 Rope-Starter (Cut to Req. Length)

60 281434 Grip-Starter Rope

65 690837 Screw (Rewind Starter)

81 691740 Lock-Muffler Screw

95 691636 Screw (Throttle Valve)

97 493267 Shaft-Throttle

104 691242 ØPin-Float Hinge

117 494870 Jet-Main (Standard)

497315 Jet-Main (High Altitude)

121 498260 Kit-Carburetor Overhaul

125 498170 Carburetor

127 694468 ØPlug-Welch

130 691203 Valve-Throttle

133 398187 Float-Carburetor

134 398188 ØValve-Needle/Seat

137 693981 Ø‡Gasket-Float Bowl

146 690979 Key-Timing

159 691753 Bracket-Air Cleaner Primer

163 272653 •Ø‡Gasket-Air Cleaner

187 691050 Line-Fuel (Cut to Required Length)

188 690877 Screw (Control Bracket)

190 690940 Screw (Fuel Tank)

202 691829 Link-Mechanical Governor

209 690319 Spring-Governor

222 692031 Bracket-Control

227 690783 Control Lever-Governor

276 271716 Ø‡ Sealing Washer

287 690940 Screw (Dipstick Tube)

300 692038 Muffler

304 695892 Housing-Blower

305 691108 Screw (Blower Housing)

306 690450 Shield-Cylinder

307 690345 Screw (Cylinder Shield)

OPERATION

KNOW YOUR LAWN MOWER

READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR LAWN

MOWER. Compare the illustrations with your lawn mower to familiarize yourself with the

location of various controls and adjustments. Save this manual for future reference.

Starter handle

Gasoline filler cap

Housing

Primer

Wheel adjuster

(on each wheel)

Handle knob

Grass catcher

Engine oil cap w/dipstick

Operator presence control bar

Engine zone control cable

MEETS CPSC SAFETY REQUIREMENTS

Sears rotary walk-behind power lawn mowers conform to the safety standards of the American

National Standards Institute and the U.S. Consumer Product Safety Commission. The blade

turns when the engine is running.

Operator presence control bar - must be

held down to the handle to start the engine.

Release to stop the engine.

Primer - pumps additional fuel from the

carburetor to the cylinder for use when

starting a cold engine.

Mulcher door –allows conversion to

discharging or bagging operation.

These symbols may appear on your lawn mower or in literature supplied with the product. Learn and

understand their meaning.

IMPORTANT: This lawn mower is shipped

WITHOUT OIL OR GASOLINE in the engine.

Drive control lever –used to engage

power-propelled forward motion lawn

mower.

Starter handle - used for starting the engine.

Throttle control –used for starting the

engine and allows you to select either

fast or slow engine speed.

Drive cover

Drive control lever

Muffler

Air filter

Mulcher door

Throttle control

MODEL NUMBER 12H802-2389-B1

BRIGGS & STRATTON 4-CYCLE ENGINE

334

851

333

202

209

356

562

505

227

616

404

615

922

621

923

358 ENGINE GASKET SET

320

585

163

524 668

842

745

617

ENGINE ZONE CONTROL

CAUTION: Federal regulations require

an engine control to be installed on this

lawn mower in order to minimize the risk

of blade contact injury. Do not under any

circumstances attempt to defeat the

function of the operator control. The blade

turns when the engine is running.

•Your lawn mower is equipped with an

operator presence control bar which

requires the operator to be positioned

behind the lawn mower handle to start

and operate the lawn mower.

The operation of any lawn

mower can result in foreign

objects thrown into the

eyes, which can result in

severe eye damage.

Always wear safety glasses or eye

shields while operating your lawn mower

or performing any adjustments or repairs.

We recommend a wide vision safety

mask over spectacles or standard safety

glasses.

HOWTO USEYOUR LAWN MOWER

ENGINE SPEED

The engine speed is controlled by a

throttle located on the side of the upper

handle. Fast position is for starting,

normal cutting, trimming and better grass

bagging. Slow position is for light cutting,

trimming and fuel economy.

Slow

Fast

TO ADJUST CUTTING HEIGHT

Raise wheels for low cut and lower

wheels for high cut. Adjust cutting height

to suit your requirements. Medium

position is best for most lawns.

•To change cutting height, squeeze

adjuster lever toward wheel. Move

wheel up or down to suit your require-

ments. Be sure all wheels are in the

same setting.

NOTE: Adjuster is properly positioned

when plate tab inserts into hole in lever.

Also, 9-position adjusters (if so equipped)

allow lever to be positioned between the

plate tabs.

To engage

drive control

Drive

control

Drive control

disengaged

Operator presence control bar

Lower Wheels for High Cut

Raise Wheels for Low Cut

Plate Tab

Lever

DRIVE CONTROL

•Self-propelling is controlled by holding

the operator presence control bar down

to the handle and pushing the drive

control lever forward until it clicks; then

releasing the lever.

•Forward motion will stop when the

operator presence control bar is

released. To stop forward motion

without stopping engine, release the

operator presence control bar slightly

until the drive control disengages. Hold

operator presence control bar down

against handle to continue mowing

without self-propelling.

•To keep drive control engaged when

turning corners, push down on handle

and lift front wheels off ground while

turning lawn mower.

MODEL NUMBER 12H802-2389-B1

BRIGGS & STRATTON 4-CYCLE ENGINE

332

304

305

363

455

1036 EMISSIONS LABEL

456

459

689

597

608 65

592

921

969

190

670

957

972

1059

601

187

1211

1210

Mulcher Door

Open mulcher door

Discharge

deflector

TO CONVERT MOWER

Your lawn mower was shipped ready to

be used as a mulcher. To convert to

bagging or discharging:

REAR BAGGING

•Lift rear door of the lawn mower and

place the grass catcher frame hooks

onto the door pivot pins.

•To convert to mulching or discharging

operation, remove grass catcher and

close rear door.

Pivot pins Grass

catcher

handle

Catcher frame hook

Rear

door

SIDE DISCHARGING

•Rear door must be closed.

•Open mulcher door and install dis-

charge deflector under guard as

shown.

•Mower is now ready for discharging

operation.

•To convert to mulching or bagging

operation, discharge deflector must be

removed and mulcher door must be

closed.

SIMPLE STEPS TO REMEMBER WHEN

CONVERTING YOUR LAWN MOWER

FOR MULCHING -

1. Rear door closed.

2. Mulcher door closed.

FOR REAR BAGGING -

1. Grass catcher installed.

2. Mulcher door closed.

FOR SIDE DISCHARGING -

1. Rear door closed.

2. Side discharge deflector installed.

CAUTION: Do not run your lawn

mower without rear door closed or

approved grass catcher in place.

Never attempt to operate the lawn mower

with the rear door removed or propped

open.

MODEL NUMBER 12H802-2389-B1

BRIGGS & STRATTON 4-CYCLE ENGINE

104

137

276

127

633

617 276

130

365

125 134

975

133

117

163

968

445

425

443

163

529

159

970

966

976

188

104

137

276 127

633

121 CARBURETOR OVERHAUL KIT

617

137

276

633

617

977 CARBURETOR

GASKET SET

163

134

613

300

668

621

222

BEFORE STARTING ENGINE

ADD OIL

Your lawnmower is shipped without oil in

the engine. Engine holds 20 oz. of oil.

For type and grade of oil to use, see

“ENGINE”in Maintenance section of this

manual.

1. Be sure lawnmower is level and area

around oil fill is clean.

2. Remove engine oil cap and fill to the

full line on the dipstick. Pour oil slowly.

Do not over fill.

NOTE: Allow oil to settle down into engine

for accurate reading. To read proper level,

tighten engine oil cap, then remove it to

read the dipstick.

3. Reinstall engine oil cap and tighten.

•Check oil level before each use. Add

oil if needed. Fill to full line on dipstick.

•Change the oil after every 25 hours of

operation or each season. You may

need to change the oil more often

under dusty, dirty conditions.

ADD GASOLINE

NOTE: Before filling fuel tank, remove

and discard the debris plug that is inside

the tank.

•Fill fuel tank. Use fresh, clean, regular

unleaded gasoline with a minimum of

87 octane. Do not mix oil with gaso-

line. Purchase fuel in quantities that

can be used within 30 days to assure

fuel freshness.

WARNING: Experience indicates that

alcohol blended fuels (called gasohol or

using ethanol or methanol) can attract

moisture which leads to separation and

formation of acids during storage. Acidic

gas can damage the fuel system of an

engine while in storage. To avoid engine

problems, the fuel system should be

emptied before storage of 30 days or

longer. Drain the gas tank, start the

engine and let it run until the fuel lines

and carburetor are empty. Use fresh fuel

next season. See Storage Instructions for

additional information. Never use engine

or carburetor cleaner products in the fuel

tank or permanent damage may occur.

TO START ENGINE

NOTE: Due to protective coatings on the

engine, a small amount of smoke may be

present during the initial use of the

product and should be considered

normal.

1. To start a cold engine, push primer

three (3) times before trying to start.

Use a firm push. This step is not

usually necessary when starting an

engine which has already run for a

few minutes.

2. Move throttle control lever to fast

position.

3. Hold operator presence control bar

down to the handle and pull starter

handle quickly. Do not allow starter

rope to snap back.

TO STOP ENGINE

•To stop engine, release operator

presence control bar.

NOTE: In cooler weather it may be

necessary to repeat priming steps. In

warmer weather over priming may cause

flooding and engine will not start. If you

do flood engine, wait a few minutes

before attempting to start and do not

repeat priming steps.

CAUTION: Fill to bottom of gas tank

filler neck. Do not overfill. Wipe off any

spilled oil or fuel. Do not store, spill or

use gasoline near an open flame.

Gasoline filler cap

(discard debris plug

inside)

Engine

oil cap

MODEL NUMBER 12H802-2389-B1

BRIGGS & STRATTON 4-CYCLE ENGINE

307

337

635

383

REQUIRES SPECIAL TOOLS

TO INSTALL. SEE REPAIR

INSTRUCTION MANUAL.

306 11

910

584

585

684 287

525

524

842

1019 LABEL KIT

847

523

869

870

871

26 28

25 29

741

146

1095 VALVE

GASKET SET

32A

Max 1/3

MULCHING MOWINGTIPS

IMPORTANT: For best performance,

keep mower housing free of built-up

grass and trash. See “CLEANING”in

Maintenance section of this manual.

•The special mulching blade will recut

the grass clippings many times and

reduce them in size so that as they fall

onto the lawn they will disperse into the

grass and not be noticed. Also, the

mulched grass will biodegrade quickly

to provide nutrients for the lawn.

Always mulch with your highest engine

(blade) speed as this will provide the

best recutting action of the blades.

•Avoid cutting your lawn when it is wet.

Wet grass tends to form clumps and

interferes with the mulching action.

The best time to mow your lawn is the

early afternoon. At this time the grass

has dried and the newly cut area will

not be exposed to the direct sun.

•For best results, adjust the lawn mower

cutting height so that the lawn mower

cuts off only the top one-third of the

grass blades. If the lawn is overgrown

it will be necessary to raise the height

of cut to reduce pushing effort and to

keep from overloading the engine and

leaving clumps of mulched grass. For

extremely heavy mulching, reduce your

width of cut by overlapping previously

cut path and mow slowly.

•Certain types of grass and grass

conditions may require that an area be

mulched a second time to completely

hide the clippings. When doing a

second cut, mow across or perpendicu-

lar to the first cut path.

•Change your cutting pattern from week

to week. Mow north to south one week

then change to east to west the next

week. This will help prevent matting

and graining of the lawn.

MOWINGTIPS

•Under certain conditions, such as very

tall grass, it may be necessary to raise

the height of cut to reduce pushing

effort and to keep from overloading the

engine and leaving clumps of grass

clippings. It may also be necessary to

reduce ground speed and/or run the

lawn mower over the area a second

time.

•For extremely heavy cutting, reduce the

width of cut by overlapping previously

cut path and mow slowly.

•For better grass bagging and most

cutting conditions, the engine speed

should be set in the fast position.

•Pores in cloth grass catchers can

become filled with dirt and dust with

use and catchers will collect less grass.

To prevent this, regularly hose catcher

off with water and let dry before using.

•Keep top of engine around starter clear

and clean of grass clippings and chaff.

This will help engine air flow and

extend engine life.

ROTARY LAWN MOWER - - MODEL NUMBER 944.361420

KEY PART

NO. NO. DESCRIPTION

KEY PART

NO. NO. DESCRIPTION

1 145755 Control Cable Assembly

3 751152 Locknut #10-24

4 158755 Hex Washer Head Screw 1/4-20 x 2.12

5 175436 V-Belt

6 150495 Spring Retainer

8 175012 Hubcap

9 145212 Locknut

11 150340 Wheel & Tire Assembly

12 12000058 E-Ring

13 137054 Pinion

14 88080 Dust Cover

15 88118 Felt Washer

16 67725 Washer 1/2 x 1-1/2 x .134

18 701037 Selector Knob

26 175262 Pan Head Tapping Screw #10-24 x 2-3/4

28 178843 Drive Cover

31 132010 Hex Flange Nut

32 137052 Drive Pulley

35 151521 Wheel Adjuster Assembly (Left)

36 175258 Gear Case Assembly

37 137090 Spring

38 63601 Locknut 1/4-20

40 75192 Spring

41 151520 Wheel Adjuster Assembly (Right)

54 177426 Grassbag Assembly

55 175739 Driveshaft Cover

57 175058 Frame

NOTE: All component dimensions given in U.S.

inches. 1 inch = 25.4 mm

Inhaltsverzeichnis

Andere Craftsman Rasenmäher Handbücher

Craftsman

Craftsman 917.273860 Bedienungsanleitung

Craftsman

Craftsman 917.370604 Bedienungsanleitung

Craftsman

Craftsman 917.378411 Bedienungsanleitung

Craftsman

Craftsman 3One 917.384150 Bedienungsanleitung

Craftsman

Craftsman 917.273222 Bedienungsanleitung

Craftsman

Craftsman 917.28861 Bedienungsanleitung

Craftsman

Craftsman 917.374040 Bedienungsanleitung

Craftsman

Craftsman EZ3 917.270781 Bedienungsanleitung

Craftsman

Craftsman EZ3 917.377200 Bedienungsanleitung

Craftsman

Craftsman 917.378551 Bedienungsanleitung

Craftsman

Craftsman 917.28936 Bedienungsanleitung

Craftsman

Craftsman 917.388300 Bedienungsanleitung

Craftsman

Craftsman 247.38528 Bedienungsanleitung

Craftsman

Craftsman 944.364680 Bedienungsanleitung

Craftsman

Craftsman 917.374021 Bedienungsanleitung

Craftsman

Craftsman 247.887360 Bedienungsanleitung

Craftsman

Craftsman EZ3 917.258591 Bedienungsanleitung

Craftsman

Craftsman 917.377152 Bedienungsanleitung

Craftsman

Craftsman 141 Bedienungsanleitung

Craftsman

Craftsman EZ3 917.387120 Bedienungsanleitung

Craftsman

Craftsman 917.377592 Bedienungsanleitung

Craftsman

Craftsman 917.370431 Bedienungsanleitung

Craftsman

Craftsman 944.360490 Bedienungsanleitung

Craftsman

Craftsman 917.27582 Bedienungsanleitung

Beliebte Rasenmäher Handbücher anderer Marken

RHINO

RHINO 1958 Bedienungsanleitung

Wolf Garten

Wolf Garten Compact plus 40 B Bedienungsanleitung

Cub Cadet

Cub Cadet LTX 1045 Bedienungsanleitung

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Bedienungsanleitung

Challenge

Challenge CH18V2 Betriebsanleitung

TALEN TOOLS

TALEN TOOLS AVR HGM30 Bedienungsanleitung

DEWEZE

DEWEZE ATM-725 Bedienungsanleitung

Weed Eater

Weed Eater 180083 Bedienungsanleitung

Husqvarna

Husqvarna Poulan Pro PP185A42 Bedienungsanleitung

Better Outdoor Products

Better Outdoor Products Quick Series Bedienungsanleitung

Cub Cadet

Cub Cadet 23HP Z-Force 60 Betriebsanleitung

MTD

MTD 795, 792, 791, 790 Bedienungsanleitung

Toro

Toro Groundsmaster 3505-D Bedienungsanleitung

Dennis

Dennis FT 610 Bedienungsanleitung

MTD

MTD 126-220-000 Bedienungsanleitung

Toro

Toro 74806 Bedienungsanleitung

Stihl

Stihl RMA 443 PV Bedienungsanleitung

Yard-Man

Yard-Man 3700-0 Bedienungsanleitung