CREE LIGHTING 304 Series Montageanleitung

304 Series

Includes: Mounting 0, R and Y

DISASSEMBLY INSTRUCTIONS

Tools:

Disassembly Instructions

Light Source (LS)

For End User (EU)

LS-EU

I.Follow points "a-b" of paragraph PS-EU

II.Unscrew screws 19 to remove optical pac-

kage 17 from heatsink 18

III.Replace all damaged optical package 17

with a new one

IV.Screw back screws 19 to attach the new

optical package to the heatsink 18, with a

torque of 2.7 Nm

V.Reconnect the socket to the plug of the

connectors 5 on the LED bar cables

For Control Authority (CA)

LS-CA

1.Follow points "I-II" of paragraph LS-EU

2.Remove gasket 20 from cover 17.1

3.Remove components 17.2 and 17.3 to re-

move the LED bar 17.4

N° DOC: DI022RLER0 Rev: 00 Latest release date: 19/11/2021

Models :

304 Mnt 0, R, Y Light Sources

codes

Power Supply

codes

LYD#

LXD#

XA-Q#

LE#

PH#

X-30X-#

Warning: Before opening the appliance, remove voltage from the mains line.

17.1

19 5

17.2

17.3

17.4

Disassembly Instructions

Power Supply (PS)

For End User (EU)

PS-EU

a.Remove frame 1 from housing 2

of the appliance, unscrewing

screws 4

b.Disconnect the socket from the

plug of connectors 5 on the LED

bar cables

c.Loosen the cable press 6 so as to

allow the outgoing cable to slide

d.Unscrew screws 7 to free power

supply unit 8 from the appliance

e.Disconnect the heads of the po-

wer cord from terminal block 9

(see section PS-AC)

f.Remove all power supply group 8

g.Replace power supply group 8

with a new one

h.Reconnect the heads of the po-

wer cord on terminal block 9 of

the new group 8

i. Screw 7 back to fix the new

group 8

j.Tighten the cable press 6 to lock

the outgoing cable

k.Reconnect the socket to the plug

of the connectors 5 on the LED

bar cables

l. Screw back 4 to fix the frame on

the appliance

N° DOC: DI022RLER0 Rev: 00 Latest release date: 19/11/2021

See www.creelighng.com/warranty for warranty and specicaons. Cree® and the Cree logo are registered trademarks of Cree, Inc.

www.creelighng-europe.com

Dissassembly instructions

End of Life (EL)

Light Source (LS) Follow instructions of the paragraph LS-CA

Power Supply (PS) Follow instructions of the paragraph PS-CA

Disassembly Instructions

Power Supply (PS)

For Control Authority (CA)

PS-CA

A.Follow points "a-f" of paragraph PS-EU

B.Unscrew the ground screws 12

C.Unscrew screws 13 that attach metal plate 11 to lid 3

D.Unscrew screws 14 that attach driver 10 to plate 11

and remove driver 10

E. Disconnect the cables of the surge 15 and unscrew

its screws from plate 11; remove the surge 15

F.Detach module 16 from plate 11

DIRECTIVE 2012/19/EU (WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT – WEEE): Information for users.

This product complies with EU Directive 2012/19/EU. The crossed-out wastebasket symbol on the appliance means that at the end of its useful lifespan, the product must be dispo-

sed of separately from ordinary household wastes. The user is responsible for delivering the appliance to an appropriate collection facility at the end of its useful lifespan. Appropriate

separate collection to permit recycling, treatment and environmentally compatible disposal helps prevent negative impact on the environment and human health and promotes recy-

cling of the materials making up the product. For more information on available collection facilities, contact your local waste collection service or the shop where you bought this ap-

pliance.

Andere CREE LIGHTING Außenleuchte Handbücher