Crux ACPBM-77Z Bedienungsanleitung

Smart-Play

Power/Video Harness

USB Extension Cable Microphone

ACPBM-77Z

Smart-Play Integration with Rear-View Camera Input

for F Series BMW with 6.5”, 7”, 8.8”, & 10.25” Monitor and 4+2 LVDS Connector

INTERFACING SOLUTIONS

Crux Interfacing Solutions • 21541 Nordhoff Street, Unit C, Chatsworth, CA 91311

phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com

rev.0712191 of 13

- Smart-Play Integraon system allows connecon of Android and other devices to the iDrive infotainment system

- Control Apps using smartphone’s voice control feature or the factory iDrive (High/Low) Knob

- Adds aermarket rear view camera input.

- Forced rear-view camera opon (only on vehicles with PDC buon)

- Picture-in-picture mode combining aer-market rear-view picture with factory parking sensor graphics.

- Interacve parking guide lines with calibraon funcon.

- Simultaneous use of picture-in-picture factory parking sensor graphics and interacve lane lines

- Built-in on-screen display and setup.

- 1 trigger output (+12V max. 1A) for the camera power.

*NOTE: Android Phones must have a rmware version of 8 and above.

The vehicle needs to have a factory AUX input.*

PRODUCT FEATURES:

PARTS INCLUDED:

ACPBM-77Z Module Power/CAN Harness ACPBM-77Z Vehicle Harness

CRUX LVDS Cable 3.5mm to RCA Adapter Smart-Play Interface Module

Setting the DIP switches of the Interface Box.

DIPs 1 and 2 on the back of the interface-box is used to set the monitor size. DIP 3 must be set to OFF.

After each change of the DIP switch settings you have to execute a power reset of the interface box!

Crux Interfacing Solutions • 21541 Nordhoff Street, Unit C, Chatsworth, CA 91311

phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com

rev.071219

2 of 13

INSTALLATION DIAGRAM:

INTERFACING SOLUTIONS

ACPBM-77Z

Smart-Play Integration with Rear-View Camera Input

for F Series BMW with 6.5”, 7”, 8.8”, & 10.25” Monitor and 4+2 LVDS Connector

DIP SWITCH SETTINGS:

Vehicle/ Navigation Dip 1 Dip 2 Dip 3

6.5“ monitor. OFF OFF No function

7“ monitor OFF OFF No function

8.8“ monitor ON OFF No function

10.25“ monitor (ver.1) ON OFF No function

10.25“ monitor (ver.2) ON ON No function

+12V Switching

Output 1 (Pink Wire)

Rear-View

Camera

(Not Included)

Pink factory

LVDS Cable

Back of Headunit

Aftermarket Crux

LVDS Cable

Back-Side of Factory

LCD Screen

*If using OEM Back-up

camera, leave REAR CAM

input unoccupied.*

*If installing after-market Back-Up

camera, use the pink wire to provide power to

to the camera, if not, please ignore this connection*

ACPBM-77Z

Vehicle Harness

UART

POWER/VIDEO

Smart-Play Module

Vehicle Auxiliary

Input (AUX input)

Female RCA to

3.5mm jack

Male L & R RCA

Outputs (Audio)

AUX

POWER / CAN

FRONT

CAM

REAR

CAM

UPDATE

Smartphone Cable

USB Input

12V Green Output 2

to ACC power

(on Smart-Play Harness)

Power/CAN

Harness

iDrive Knob

Retention Cable

LVDS

OUT

123

Intelligent Solution

ACPBM-77Z Module

ACC Power

Ground

Constant

LVDS OUT

LVDS IN

Crux Interfacing Solutions • 21541 Nordhoff Street, Unit C, Chatsworth, CA 91311

phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com

rev.071219

3 of 13

INTERFACING SOLUTIONS

ACPBM-77Z

Smart-Play Integration with Rear-View Camera Input

for F Series BMW with 6.5”, 7”, 8.8”, & 10.25” Monitor and 4+2 LVDS Connector

INSTALLATION INSTRUCTIONS:

1. Installaon is done behind the front

panel.

2. Remove the dashboard front panel. 3. Remove the front panel.

4. We must now remove the four

screws behind the front panel.

5. Use a T-20 bit to remove these 4

screws.

6. Remove the panel below the A/C

control.

7. Remove the two torques behind the

panel.

8. Remove the LCD monitor. 9. Unplug the pink LVDS connector

from behind the LCD monitor.

Crux Interfacing Solutions • 21541 Nordhoff Street, Unit C, Chatsworth, CA 91311

phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com

rev.071219

4 of 13

INTERFACING SOLUTIONS

ACPBM-77Z

Smart-Play Integration with Rear-View Camera Input

for F Series BMW with 6.5”, 7”, 8.8”, & 10.25” Monitor and 4+2 LVDS Connector

10. Remove the A/C control panel. 11. Remove the two torques bracing

the radio unit.

12. Remove the radio unit.

13. Remove the Quadlock connector

from behind the radio.

14. Insert the CRUX LVDS Cable into

the LVDS OUT port on the ACPBM-77Z

module.

15. Funnel the CRUX LVDS cable from

the radio cavity to the LCD screen

cavity.

16. Connect the otherside of the CRUX

LVDS Cable to the LVDS port on the LCD

screen and place it to rest.

17. Funnel the Pink LVDS cable to the

radio cavity and connect it to the LVDS

IN port on the ACPBM-77Z module.

18. Tap the Black GND wire from the

Smart-Play Power/Video harness to the

black Ground wire on the ACPBM-77Z

vehicle harness (Male Side).

Crux Interfacing Solutions • 21541 Nordhoff Street, Unit C, Chatsworth, CA 91311

phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com

rev.071219

5 of 13

INTERFACING SOLUTIONS

ACPBM-77Z

Smart-Play Integration with Rear-View Camera Input

for F Series BMW with 6.5”, 7”, 8.8”, & 10.25” Monitor and 4+2 LVDS Connector

18. Tap the Yellow constant wire from

the Smart-Play Power/Video harness to

the Red constant wire on the ACPBM-

77Z vehicle harness (Male Side).

19 Connect the male side of the

ACPBM-77Z vehicle harness to the fac-

tory female Quadlock connector that

was originally connected to the radio.

20. Connect the female side of the

ACPBM-77Z vehicle harness to the

factory radio.

22. If installing an aermarket back-up

camera, plug the camera’s video out

to the REAR CAM input on ACPBM-77Z

module. You will also need to power

the camera for it to work. Use the

PINK power output 1 wire provided

on the Power/CAN harness to do this.

An image is displayed in step 23. If

retaining an OEM camera, skip steps 22

and 23.

21. Plug the Video Out from the Smart-

Play Power/Video harness into the

FRONT CAM input on the module.

23. Connect the camera power wires to

the PINK power output 1 wire.

25. Tap the RED ACC wire from the

Power/Video harness to the green

+12V output, from the previous step’s

8-pin male connector.

24. Connect the male 8-pin connector

from the vehicle harness to the female

8-pin connector on the Power/CAN

harness.

26. Connect the male audio RCA

outputs from the Power/Video harness

to the Female RCA-to-3.5mm cable.

Crux Interfacing Solutions • 21541 Nordhoff Street, Unit C, Chatsworth, CA 91311

phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com

rev.071219

6 of 13

INTERFACING SOLUTIONS

ACPBM-77Z

Smart-Play Integration with Rear-View Camera Input

for F Series BMW with 6.5”, 7”, 8.8”, & 10.25” Monitor and 4+2 LVDS Connector

27. Connect the 3.5mm jack from the

convertor to the vehicle auxiliary input

(AUX IN).

28. Mount the microphone to a loca-

on of your choice.

29. Connect the 3.5mm microphone

jack to the MIC input on the Power/

Video harness.

30. Connect the Power/CAN harness to

the POWER/CAN input on the ACPBM-

77Z module.

31. Connect the white wire with the

4-pin connector from the Power/CAN

harness to the UART port on the Smart-

Play module.

32. Connect the Power/Video harness

to the POWER/VIDEO port on the

Smart-Play module.

35. Check the OSD sengs and

makesure they match those on the

next page. Test the Back-Up camera.

Put gear in reverse and check for rear

camera image on screen. Go to Smart-

Play mode and test for funconality.

Once the cameras and Smart-Play

validaon is complete, mount the

ACPBM-77Z and Smart-Play modules,

reinstall all the components to their

original set-up.

33. Connect the USB extenon cable

to the USB input on the Power/

Video harness for easier access when

connecng your smart-phone or USB.

34. Test the communicaon. Turn on

the ignion and check if LEDs are on.

Crux Interfacing Solutions • 21541 Nordhoff Street, Unit C, Chatsworth, CA 91311

phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com

rev.071219

7 of 13

INTERFACING SOLUTIONS

ACPBM-77Z

Smart-Play Integration with Rear-View Camera Input

for F Series BMW with 6.5”, 7”, 8.8”, & 10.25” Monitor and 4+2 LVDS Connector

OSD Menu

Use the following buons to enter the ACPBM-77Z OSD Menu:

BMW

OSD SETTINGS:

To ensure that Smart-Play works, make sure

these input sengs are in eect:

FRONTCAM (FVC) = SmartPhone

To retain the factory Back-Up Camera:

REARCAM (RVC) = OEM

To acvate an aermarket Back-Up Camera:

REARCAM (RVC) = ON

Use knob to navigate menu

and make selections

Hold for 3 sec to enter

OSD menu

to exit, hold for 3 sec

Hold for 3 sec to enter

Smart-Play menu

to exit, hold for 3 sec

Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311

phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com

rev.070919

11 of 13

INTERFACING SOLUTIONS

ACPAD-81Y

Smart-Play Integration with Multi Camera Inputs & USB Player

for AUDI Vehicles with MMI MIB/MIB2 Systems

OSD Menu Menu Item

OSD

POS. X 0-xxx

POS. Y 0-xxx

Size Small Small OSD menu window

Large Large OSD menu windows

Osd TimeOut 2-20

Info Version X.XX.XX Displays the current SW-version

Factory Reset

CONNECTING THE SMART-PLAY INTERFACE:

plugged in to the USB port using the smartphone’s OEM charger/data cable. The USB port on the

ACPBM-77Z can be used to charge the Apple device or play videos or music from a USB thumb drive.

to the next enabled input. If all inputs are enabled the order is:

Rear CAM > Video Input (Smart-Play) > Repeat ...

The ACPBM-77Y utilizes wireless technology for Apple devices. Android devices are required to be

ACPBM-77Y

To exit the Smart-Play menu, hold the “Menu” button for 3-5 sec.

Crux Interfacing Solutions • 21541 Nordhoff Street, Unit C, Chatsworth, CA 91311

phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com

rev.071219

8 of 13

INTERFACING SOLUTIONS

ACPBM-77Z

Smart-Play Integration with Rear-View Camera Input

for F Series BMW with 6.5”, 7”, 8.8”, & 10.25” Monitor and 4+2 LVDS Connector

Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311

phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com

rev.070919

12 of 13

INTERFACING SOLUTIONS

ACPAD-81Y

Smart-Play Integration with Multi Camera Inputs & USB Player

for AUDI Vehicles with MMI MIB/MIB2 Systems

1. Picture above shows the HOME screen of the Smart-

with a USB thumb drive plugged in to the USB port.

2. Using the iDrive knob of the vehicle, navigate the

cursor to the Bluetooth icon (scrolling right). Image above

will appears on the screen the BT device name and

pairing code (0000).

device and connect to “CRUX Smart-Play_XXXX”.

4. Once the ACPBM-77Z has connected via Bluetooth, it

5. Use the iDrive knob to navigate the cursor to the 6. Image above shows the “Home Screen” once the

smartphone is connected.

NOTE:

Make sure the audio source on the factory system is set to AUX mode (not bluetooth). Also, if your smartphone is set to

automatically connect to your factory bluetooth, make sure you forget that connection on your phone. This is becase your

phone can only connect to 1 bluetooth device at a time, therefore, it will interfere with the wireless Smart-Play connection.

OSD Menu Menu Item Seng Descripon

Input FRONTCAM

(FVC)

OFF Smart-Play will be deacvated.

SmartPhone Allows Smart-Play to acvate.

Opon 1 Park Logic

Intelligent For vehicles with front-PDC. Enabled while parking

process and up to 12 mph

RGearOnly Enabled while parking process

(not suitable for front camera operaon)

RGearSpeed Enabled while parking process and up to

e.g. 7 mph (speed adjustable)

RGearTime Enabled while parking process and up to 20 seconds

Opon 2 R/F Cam ON XX Speed seng for deacvang of the camera image

Opon 2 PDC Graphic

OFF OEM PDC display of the vehicle deacvated

Horizontal Vehicles with horizontal OEM PDC display

Vercal Vehicles with vercal OEM PDC display

Crux Interfacing Solutions • 21541 Nordhoff Street, Unit C, Chatsworth, CA 91311

phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com

rev.071219

9 of 13

INTERFACING SOLUTIONS

ACPBM-77Z

Smart-Play Integration with Rear-View Camera Input

for F Series BMW with 6.5”, 7”, 8.8”, & 10.25” Monitor and 4+2 LVDS Connector

Seng the Rear Aermarket Camera

(Use the PINK (12V Output 1) wire to power the Rear camera)

In the OSD Menu, set “Opon 1” > menu item “Power

Out 1” to “CAM”

Crux Interfacing Solutions • 21541 Nordhoff Street, Unit C, Chatsworth, CA 91311

phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com

rev.071219

10 of 13

INTERFACING SOLUTIONS

ACPBM-77Z

Smart-Play Integration with Rear-View Camera Input

for F Series BMW with 6.5”, 7”, 8.8”, & 10.25” Monitor and 4+2 LVDS Connector

OSD Menu Menu Item Seng Descripon

Input REARCAM (RVC)

OFF Rear View camera deacvated

ON Switches to rear-view camera if reverse gear is engaged

or PDC is acvate

OEM Retains the factory Back-up Camera.

Opon 1 Park Logic

Intelligent

For vehicles with PDC. Enabled while parking process

and up to 12 mph (not suitable for front camera

operaon for vehicles without front PDC)

RGearOnly Enabled while parking process

(not suitable for front camera operaon)

RGearSpeed Enabled while parking process and up to

e.g. 7 mph (speed adjustable)

RGearTime Enabled while parking process and up to 20 seconds

Opon 1 RVC Lines ON Interacve lane lines acvated

Opon 2 R/F Cam Till XX Speed seng for deacvang of the camera image

Opon 2 PDC Graphic

OFF OEM PDC display of the vehicle deacvated

Horizontal Vehicles with horizontal OEM PDC display

Vercal Vehicles with vercal OEM PDC display

Opon 2 Cam Trigger CAN Rear gear and blinker signal detecon over CAN Bus

Analog Rear gear signal detecon over analog +12V signals

OSD Menu Menu Item Seng Descripon

Input RVC OEM

If a factory rear-view camera is present. The interface

turns o, if reverse gear is enabled and it displays

factory rear-view camera

Opon 1 Park Logic

Intelligent For vehicles with front-PDC. Enabled while parking

process and up to 12 mph.

RGearSpeed Enabled while parking process and up to

e.g. 7 mph (speed adjustable)

RGearTime Enabled while parking process and up to 20 seconds

Opon 2 R/F Cam Till XX Speed seng for deacvang of the camera image

Inhaltsverzeichnis

Andere Crux Autozubehör Handbücher

Crux

Crux RVCCH-75F Bedienungsanleitung

Crux

Crux Sightline VIMMB-85N Bedienungsanleitung

Crux

Crux Sightline VIMGM-94 Bedienungsanleitung

Crux

Crux Sightline RVCAD-81 Bedienungsanleitung

Crux

Crux BEEBG-25 Bedienungsanleitung

Crux

Crux RVCVL-82S Bedienungsanleitung

Crux

Crux F Series Bedienungsanleitung

Crux

Crux ACPGM-80N Bedienungsanleitung

Crux

Crux AVIGM-04S Bedienungsanleitung

Crux

Crux RVCAD-81M Gebrauchs- und Pflegehandbuch

Crux

Crux VIMBM-86B Bedienungsanleitung

Crux

Crux ACPAD-01W Bedienungsanleitung

Crux

Crux CFD-03E Bedienungsanleitung

Crux

Crux RVCMZ-72D Bedienungsanleitung

Crux

Crux RVCCH-75 Bedienungsanleitung

Crux

Crux SOOCR-26 Bedienungsanleitung

Crux

Crux RVCCH-75W Bedienungsanleitung

Crux

Crux VIMMB-85S Bedienungsanleitung

Crux

Crux BEECR-35D Bedienungsanleitung

Crux

Crux DKGM-51 Bedienungsanleitung

Crux

Crux MRVFD-79Q Bedienungsanleitung

Crux

Crux Sightline RVCCH-75E Bedienungsanleitung

Crux

Crux BEELINE Series Bedienungsanleitung

Crux

Crux ACPBM-77X Bedienungsanleitung

Beliebte Autozubehör Handbücher anderer Marken

James Baroud

James Baroud Odyssey Bedienungsanleitung

Motorola

Motorola i50sx Bedienungsanleitung

Yakima

Yakima 9MM STANDARD BIKE MOUNT Bedienungsanleitung

Feniex

Feniex T3 Bedienungsanleitung

Kia

Kia E8300-4D000 Bedienungsanleitung

Brink

Brink 756843 Bedienungsanleitung

Whispbar

Whispbar K085W Bedienungsanleitung

v.link

v.link CI-VL2-PC-HSD Bedienungsanleitung

Viking

Viking Stack-Rack Kurzanleitung zur Einrichtung

Aries

Aries 203015 Bedienungsanleitung

Choetech

Choetech AT0005 Bedienungsanleitung

ZZ2

ZZ2 ZZAIR-PRO Bedienungsanleitung

Holman

Holman 4A80L Bedienungsanleitung

Thule

Thule 2075 Bedienungsanleitung

Motorola

Motorola T325 Bedienungsanleitung

TAUBENREUTHER

TAUBENREUTHER 16-3950 Installationsanleitung

DV8

DV8 FBJL-02 Bedienungsanleitung

Prorack

Prorack K1163 Bedienungsanleitung