Curt Manufacturing 11435 Bedienungsanleitung

MAKE: STYLE:

WARNING: NEVER EXCEED YOUR VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY

For more information log onto www.curtmfg.com & for helpful towing tips log onto www.hitchinfo.com

WEIGHT CARRYING:

INSTALLATION TIPS:

INSTALLATION REQUIRES:

VEHICLE PHOTO:

HITCH ILLUSTRATION:

REPRESENTATIVE PHOTO

MAKE SURE YOUR HITCH MATCHES

LEVEL OF DIFFICULTY:

MODERATE

EASY MODERATE CHALLENGING

1. BEFORE YOU BEGIN INSTALLATION, READ ALL

INSTRUCTIONS THOROUGHLY.

2. TO EASE INSTALLATION, 2 PEOPLE MAY BE

REQUIRED.

3. USING PROPER TOOLS WILL GREATLY IMPROVE

THE QUALITY OF THE INSTALL AND REDUCE THE

TIME REQUIRED.

4. NEED HELP OR HAVE SOME QUESTIONS?

CALL TECHNICAL SUPPORT AT 800.798.0813

Safety glasses should be

worn at all times while

installing this product

YEARS: 2016-CURRENT MAZDA MODEL: MX-5 MIATA CONVERTIBLE

2,000

200

TRAILER WEIGHT:

TONGUE WEIGHT:

11435 INSTALLATION INSTRUCTIONS

LBS.

WARNING:

WE RECOMMEND THE USE OF 18050 STABILIZING STRAPS FOR ALL NON-TRAILER

(WHEEL-LESS) LOADS. PLEASE SEE THE CURT CATALOG OR VISIT US ONLINE AT

WWW.CURTMFG.COM FOR FURTHER INFORMATION.

90 MIN.

MIN.

PRO INSTALL TIME:

NOVICE INSTALL TIME:

IF YOU ARE HESITANT TO UNDERTAKE

THIS TASK ON YOUR OWN, CONTACT AN AUTHORIZED

CURT INSTALLER FOR ADDITIONAL ASSISTANCE.

SCAN FOR

MORE INFO

PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE ALL FASTENERS ARE TIGHT AND ALL STRUCTURAL COMPONENTS ARE SOUND

CURT Manufacturing LLC. warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,

CURT Manufacturing LLC. may repair or replace the product at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of this product

voids the warranty. CURT Manufacturing LLC.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or consequential loss or damage.

For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com

This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C.Regulation V-5 and SAE J684.

3/24/2016

SOCKET

10mm

11/16"

7/16"

SOCKET

EXTENSION

RATCHET

TORQUE

WRENCH DIE GRINDER SAFETY

GLASSES

PART REMOVAL

ENLARGE ACCESS HOLE

FISHWIRE HARDWARE

LOWER EXHAUST

REPLACE FASCIA SUPPORT

INSTALLATION WALKTHROUGH:

For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com

Parts List

DESCRIPTION

PART NUMBER

QTY

ITEM

FASCIA TAB11435-FT21

CARRIAGE BOLT1_4 - 20 x 3_4 CARRIAGE

NYLOCK HEX NUT1_4 - 2023

CARRIAGE BOLT7/16-14 x 1 1/244

HEX FLANGE NUT7/16-14

.250 x .88 x 2.25" SQUARE HOLE SPACERCM-SP246

7/16" FISHWIRE7_16 FISHWIRE4

EXISTING FASCIA

SUPPORT SCREW

(BOTH SIDES)

EXISTING FASCIA

SUPPORT TAB

(BOTH SIDES)

DESIGNED FOR USE WITH

BALL MOUNT # 45521

EURO MOUNT

OPTION AVAILABLE

# 45571 ( 1 7/8" BALL)

# 45572 (2" BALL)

PASSENGER SIDE

FRAME RAIL

DRIVER SIDE

FRAME RAIL

1. Lower exhaust by detaching (5) exhaust hangers. (4) hangers are

located on the muffler and (1) hanger is located forward of the muffler.

2. Using a 10mm socket, remove plastic fascia tab supports attaching

fascia tab to bottom of frame rails on driver and passenger corners of

vehicle. Return both supports and (2) support screws to vehicle owner.

Retain the remaining (2) support screws for reinstallation.

ENLARGE HOLE

(BOTH SIDES)

INSTALLATION WALKTHROUGH:

For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com

3. Enlarge rear mounting hole on the driver and passenger side of vehicle

to allow CM-SP2 spacers and 7/16" carriage bolts to enter into the

frame rails.

4. Fishwire CM-SP2 spacers and 7/16" carriage bolts through enlarged

holes and out forward mounting holes. Reverse fishwire CM-SP2

spacers and 7/16" carriage bolts into enlarged holes.

5. Raise hitch into position and secure with 7/16" hex flange nuts.

6. Attach 11435-FT brackets to hitch side plates using 1/4" carriage bolts

and 1/4" nylock nuts, as shown. Attach driver and passenger side

vehicle fascia tabs to 11435-FT brackets using the existing M6 fascia

support screws.

1.00"

INSTALLATION WALKTHROUGH:

For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com

7. Torque 7/16" hardware to 60 lb-ft, 1/4" hardware to 122 in-lb and M6

hardware to 7 lb-ft

8. Raise exhaust back into position and reattach all exhaust hangers.

GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH: LBS. TRAILER WEIGHT & LBS. TONGUE WEIGHT.

WARNING: ALL NON-TRAILER LOADS APPLIED TO THIS PRODUCT MUST BE SUPPORTED BY 18050 STABILIZING STRAPS.

WARNING: ** FAILURE TO PROPERLY SUPPORT NON-TRAILER LOADS WILL VOID PRODUCT WARRANTY **

WARNING: *** DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY ***

FOR MORE INFORMATION LOG ONTO WWW.CURTMFG.COM & FOR HELPFUL TOWING TIPS LOG ONTO WWW.HITCHINFO.COM

HAVING INSTALLATION QUESTIONS? CALL TECHNICAL SUPPORT AT 1-800-798-0813

HITCH WEIGHT: LBS.

INSTALL TIME

PROFESSIONAL: MINUTES

NOVICE (DIY): MINUTES

INSTALL NOTES:

PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE THAT ALL FASTENERS

ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND.

CURT Manufacturing LLC., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser.

If the product is found to be defective, CURT Manufacturing LLC., may repair or replace the product, at their option, when the product is returned, prepaid,

with proof of purchase. Alteration to, misuse of, or improper installation of this product voids the warranty. CURT Manufacturing LLC.'s liability is limited to

repair or replacement of products found to be defective, and specifically excludes liability for incidental or consequential loss or damage.

This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C.Regulation V-5 and SAE J684.

2,000 200

MAZDA MX-5 MIATA

3/24/2016

11435

Scan

for more

information

PAGE 1 of 2

Parts List DESCRIPTIONPART NUMBERQTYITEM FASCIA TAB

11435-FT21 CARRIAGE BOLT1_4 - 20 x 3_4 CARRIAGE22 NYLOCK HEX NUT1_4 - 2023 CARRIAGE BOLT7/16-14 x 1 1/244 HEX FLANGE NUT7/16-144

5.250 x .88 x 2.25" SQUARE HOLE SPACERCM-SP2

67/16" FISHWIRE7_16 FISHWIRE

1.00"Ø

DRIVER SIDE

FRAME RAIL

PASSENGER SIDE

FRAME RAIL

EXISTING FASCIA

SUPPORT TAB

(BOTH SIDES)

EXISTING FASCIA

SUPPORT SCREW

(BOTH SIDES) DESIGNED FOR USE WITH

BALL MOUNT # 45521

EURO MOUNT

OPTION AVAILABLE

# 45571 ( 1 7/8" BALL)

# 45572 (2" BALL)

- ENLARGE HOLES

- FISHWIRE HARDWARE

- LOWER EXHAUST

- REPLACE FASCIA SUPPORT

BRACKETS

ENLARGE HOLE

(BOTH SIDES)

HAVING INSTALLATION QUESTIONS? CALL TECHNICAL SUPPORT AT 1-800-798-0813

INSTALLATION STEPS

PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE THAT ALL FASTENERS

ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND.

CURT Manufacturing LLC., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective, CURT

Manufacturing LLC., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of this product voids the

warranty. CURT Manufacturing LLC.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or consequential loss or damage.

This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C.Regulation V-5 and SAE J684.

MAZDA MX-5 MIATA

3/24/2016

11435

PAGE 2 of 2

1. Lower exhaust by detaching (5) exhaust hangers. (4) hangers are located on the muffler and (1) hanger is

located forward of the muffler.

2. Using a 10mm socket, remove plastic fascia tab supports attaching fascia tab to bottom of frame rails on driver

and passenger corners of vehicle. Return both supports and (2) support screws to vehicle owner. Retain the

remaining (2) support screws for reinstallation.

3. Enlarge rear mounting hole on the driver and passenger side of vehicle to allow CM-SP2 spacers and 7/16"

carriage bolts to enter into the frame rails.

4. Fishwire CM-SP2 spacers and 7/16" carriage bolts through enlarged holes and out forward mounting holes.

5. Reverse fishwire CM-SP2 spacers and 7/16" carriage bolts into enlarged holes.

6. Raise hitch into position and secure with 7/16" hex flange nuts.

7. Attach 11435-FT brackets to hitch side plates using 1/4" carriage bolts and 1/4" nylock nuts, as shown.

8. Attach driver and passenger side vehicle fascia tabs to 11435-FT brackets using the existing M6 fascia

support screws.

9. Torque 7/16" hardware to 60 lb-ft, 1/4" hardware to 122 in-lb and M6 hardware to 7 lb-ft

10. Raise exhaust back into position and reattach all exhaust hangers.

TOOLS REQUIRED

10mm SOCKET

11/16" SOCKET

7/16" SOCKET

3" SOCKET EXTENSION

RATCHET

TORQUE WRENCH

DIE GRINDER

SAFETY GLASSES

Inhaltsverzeichnis

Andere Curt Manufacturing Autozubehör Handbücher

Curt Manufacturing

Curt Manufacturing 16600 Bedienungsanleitung

Curt Manufacturing

Curt Manufacturing 13118 Bedienungsanleitung

Curt Manufacturing

Curt Manufacturing 70103 Bedienungsanleitung

Curt Manufacturing

Curt Manufacturing 18101 Bedienerhandbuch

Curt Manufacturing

Curt Manufacturing 13081 Bedienungsanleitung

Curt Manufacturing

Curt Manufacturing 15809 Bedienungsanleitung

Curt Manufacturing

Curt Manufacturing CHT-56438 Bedienungsanleitung

Curt Manufacturing

Curt Manufacturing 55525 Bedienungsanleitung

Curt Manufacturing

Curt Manufacturing 11419 Bedienungsanleitung

Curt Manufacturing

Curt Manufacturing 18100 Bedienerhandbuch

Curt Manufacturing

Curt Manufacturing 18100 Bedienungsanleitung

Curt Manufacturing

Curt Manufacturing 12113 Bedienungsanleitung

Curt Manufacturing

Curt Manufacturing 51453 Bedienungsanleitung

Curt Manufacturing

Curt Manufacturing Quick Goose II Bedienungsanleitung

Curt Manufacturing

Curt Manufacturing RockerBall 40047 Bedienungsanleitung

Curt Manufacturing

Curt Manufacturing 18152 Bedienungsanleitung

Curt Manufacturing

Curt Manufacturing 13287 Bedienungsanleitung

Curt Manufacturing

Curt Manufacturing 70001 Bedienungsanleitung

Curt Manufacturing

Curt Manufacturing 13454 Bedienungsanleitung

Curt Manufacturing

Curt Manufacturing 58963 Bedienungsanleitung

Curt Manufacturing

Curt Manufacturing 70108 Bedienungsanleitung

Curt Manufacturing

Curt Manufacturing ECHO Bedienungsanleitung

Curt Manufacturing

Curt Manufacturing 58957 Bedienungsanleitung

Curt Manufacturing

Curt Manufacturing ECHO Bedienungsanleitung

Beliebte Autozubehör Handbücher anderer Marken

James Baroud

James Baroud Odyssey Bedienungsanleitung

Motorola

Motorola i50sx Bedienungsanleitung

Yakima

Yakima 9MM STANDARD BIKE MOUNT Bedienungsanleitung

Feniex

Feniex T3 Bedienungsanleitung

Renault

Renault 77 11 423 180 Bedienungsanleitung

Kia

Kia E8300-4D000 Bedienungsanleitung

Brink

Brink 756843 Bedienungsanleitung

Whispbar

Whispbar K085W Bedienungsanleitung

v.link

v.link CI-VL2-PC-HSD Bedienungsanleitung

Viking

Viking Stack-Rack Kurzanleitung zur Einrichtung

Aries

Aries 203015 Bedienungsanleitung

Choetech

Choetech AT0005 Bedienungsanleitung

ZZ2

ZZ2 ZZAIR-PRO Bedienungsanleitung

Holman

Holman 4A80L Bedienungsanleitung

Thule

Thule 2075 Bedienungsanleitung

Motorola

Motorola T325 Bedienungsanleitung

TAUBENREUTHER

TAUBENREUTHER 16-3950 Installationsanleitung

DV8

DV8 FBJL-02 Bedienungsanleitung