CYP PRO-3GSDI44 Bedienungsanleitung

PRO-3GSDI44

3G-SDI 4 to 4 Switching

Distribution Amplier

OPERATION MANUAL

Safety Precautions

Please read all instructions before attempting to unpack or install or

operate this equipment, and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

Always follow basic safety precautions to reduce the risk of

ﬁre, electrical shock and injury to persons.

To prevent ﬁre or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

Never spill liquid of any kind on or into this product.

Never push an object of any kind into this product through

module openings or empty slots, as you may damage parts.

Do not attach the power supply cabling to building surfaces.

Do not allow anything to rest on the power cabling or allow it to

be abused by persons walking on it.

To protect the equipment from overheating, do not block the

slots and openings in the module housing that provide

ventilation.

Revision History

Version No Date Summary of Change

VR0 20110103 Preliminary Release

v1.01 20140120 Corrected RS-232

Command

Table of Contents

1. Introduction ……………………..……………………...…........….…….

2. Applications …………………..………………….……...................…..

3. Package Contents ………………………...........……….................…

4. System Requirements ……………..……….........………............…….

5. Features …………………………………………......……........…...……

6. Specications ………………………………...……..........………....….

7. Operation Controls and Functions ……………...……..............……

7.1 Front Panel ..............................................................................

7.2 Rear Panel .…………………………………..…….......…...….…

8. RS-232 Protocols .......................…......……......…..........…..…....…...

8.1 Pin Assignment ..................…......………..……..........…..…....….

8.2 Commands .........…..…........................................................…...

9. Remote Control ................................................................................

10. Connection and Installation ….………………….........…..…..…......

11. Acronyms …......................................................................................

1. Introduction

The 3G-SDI 4 by 4 Switcher allows SD-SDI, HD-SDI and 3G-SDI signals to be

shown on SDI display while ensuring high bit rates of 2.970 Gbit/s to give you

fast signal transmission without signal loss. For professionals this means that

it is now easier to switch four 3G-SDI signals and split it up to four SDI signal

outputs.

2. Applications

Video broadcasting display

Professional video program display

Film studios program monitoring

Video program switching display

3. Package Contents

3G-SDI 4 by 4 Switcher

Remote Control (CR-23)

5V/2.6A DC power adaptor

Operation Manual

4. System Requirements

Input connects with SDI sources and output connects with SDI displays, all

input/output with SDI cables.

5. Features

Four 3G-SDI input sources can selected as the source and split to four

3G-SDI displays simultaneously

Operation at 2.970Gb/s, 2.970/1.001Gb/s, 1.485Gb/s, 1.485/1.001Gb/s

and 270Mb/s

Supports SMPTE 425M (Level A and Level B), SMPTE 424M, SMPTE 292M,

SMPTE 259M-C

Provides the Equalized and re-clocked transmission

Control by RS-232, IR Remote and on panel buttons

Supports signal input and output distance of up to 300M for SD signals,

200M for HD signals and 100M for 3G signals.

Note: Cable tested with Belden 1694A. Operating distances may vary if

used with another type of cable.

6. Specications

SMPTE Standard 425M Level A & B, 424M, 292M, 259M-C

SDI Transmit ion Rates 2.970 Gbit/s and 2.970/1.001 Gbit/s

Input/Output Ports 4/4 BNC (SD-SDI/HD-SDI/3G-SDI)

Support Timing SD-SDI: 480i / 576i

HD-SDI: 720p@50/60, 1080i@50/60, 1080p@24/50/60

3G-SDI: 1080p@50/60

Power Supply 5V DC/ 2.6A (US/EU standards, CE/FCC/UL certiﬁed)

ESD Protection Human body model: ± 8kV (air-gap discharge)

± 4kV (contact discharge)

SDI Cable Distance 3G-SDI up to 100M (BELDEN 1694A)

HD-SDI up to 200M (BELDEN 1694A)

SD-SDI up to 300M (BELDEN 1694A)

Dimension (mm) 200 (W) x 138 (D) x 30 (H)

Weight (g) 900

Chassis Material Metal

Silkscreen Color Black

Operating Temperature 0˚C ~ 40˚C / 32˚F ~ 104˚F

Storage Temperature -20˚C ~ 60˚C / -4˚F ~ 140˚F

Relative Humidity 20 ~ 90% RH (Non-condensing)

Power Consumption (W) 5W

7. Operation Controls and Functions

7.1 Front Panel

POWER

INPUT

SDI OUTPUT

PRO-3GSDI44

① ② ③ ④

①Power LED: This green LED will illuminate when the device is connected

with power supply.

②IR receiver: This IR window receives IR signal from the remote control

included in the package.

③3G-SDI Input select/Indicator 1~4: Press the input button sequentially to

switch to your desired SDI input source, the LED will illuminate to indicate

which input source is selected.

④SDI OUTPUT: These slots are to connect to the SDI displays with an SDI

cables for displaying images. Or it can be connect with another SDI

converter/extender to extend the signal.

7.2 Rear Panel

12 3 4

SDI INPUT

RS-232

DC 5V

① ② ③

①SDI INPUT: These slots are to connect to the SDI source equipments such

as video camcorder or SDI player.

②RS-232: Connect with D-Sub 9pin cable from the PC/NB for RS-232 control.

③DC 5V: Plug the 5V DC power supply into the unit and connect the

adaptor to AC wall outlet. Green LED will illuminate when the power is

connected.

8. RS-232 Protocols

8.1 Pin Assignment

Pins deﬁnition of modem cable

Remote Controller

PIN Deﬁnition PIN Deﬁnition

1 NC 1 NC

2 TxD 2 RxD

3 RxD 3 TxD

4 NC 4 NC

5 GND 5 GND

6 NC 6 NC

7 NC 7 NC

8 NC 8 NC

9 NC 9 NC

Baud Rate: 19200bps

Data bit: 8 bits

Parity: None

Stop bit: 1 bit

8.2 Commands

Command Action

pc Enter into /exit PC Command

power00 Power OFF

power01 Power ON

input01 Input selction 1

input02 Input selection 2

input03 Input selection3

input04 Input selection4

All commands must be followed by a carriage return

9. Remote Control

①Power: Press the button to turn on/off the

unit.

②Direct input selector: Press 1, 2, 3 or 4 to

select the desired input source.

①

②

10. Connection and Installation

Acronyms A

Acronym Complete Term

3G Bandwidth 2.97Gbit/s ≈ 3G

BNC Bayonet Neill-Concelman

SDI Serial Digital Interface

Inhaltsverzeichnis

Andere CYP Verstärker Handbücher

Beliebte Verstärker Handbücher anderer Marken

ASTRO

ASTRO HVO V40 P Bedienungsanleitung

Marantz

Marantz SUPERSCOPE BLA-545 Montageanleitung

NAD

NAD CI980 Bedienungsanleitung

Technics

Technics SE-CH770 Bedienungsanleitung

Harman Kardon

Harman Kardon HK6300 Bedienungsanleitung

NAD

NAD T975 Bedienungsanleitung

McIntosh

McIntosh MA6850 Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Bedienungsanleitung

Viatron

Viatron Autrix Bedienungsanleitung

GME

GME GA9800 Bedienungsanleitung

Atlas

Atlas CP700 Bedienungsanleitung

Roland

Roland KC-1000 Bedienungsanleitung

Pyle

Pyle PFMRA350BW Bedienungsanleitung

Advantage

Advantage S-250 Bedienungsanleitung

IRT Electronics

IRT Electronics DVA-3007 Bedienungsanleitung

Dimavery

Dimavery BA-100 Series Bedienungsanleitung

Sony

Sony XM-S400D Bedienungsanleitung

Schertler

Schertler ROY X Bedienungsanleitung