CYP CLUX-1H8CAT Bedienungsanleitung

CLUX-1H8CAT

1 by 8 HDMI to CAT 6

V1.3 Splitter

Operation Manual

CLUX-1H8CAT

Disclaimers

The information in this manual has been carefully checked and

is believed to be accurate. Cypress Technology assumes no

responsibility for any infringements of patents or other rights of third

parties which may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies

that may be contained in this document. Cypress also makes

no commitment to update or to keep current the information

contained in this document.

Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer le, in any form or by any means

- electronic, mechanical, magnetic, optical, chemical, manual,

or otherwise - without express written permission and consent from

Cypress Technology.

Version 1.0 October 2009

Trademark Acknowledgments

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

Safety Precautions

Please read all instructions before attempting to unpack or install or

operate this equipment, and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

 Always follow basic safety precautions to reduce the risk of

re, electrical shock and injury to persons.

 To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

 Never spill liquid of any kind on or into this product.

 Never push an object of any kind into this product through

module openings or empty slots, as you may damage parts.

 Do not attach the power supply cabling to building surfaces.

 Do not allow anything to rest on the power cabling or allow it to

be abused by persons walking on it.

 To protect the equipment from overheating, do not block the

slots and openings in the module housing that provide

ventilation.

Revision History

Version No Date Summary of Change

V1 20091028 Preliminary Release

Table of Contents

1. Introduction ……………………..……………………...…........….…….

2. Applications …………………..………………….……...................…..

3. Package Contents ………………………...........……….................…

4. System Requirements ……………..……….........………............…….

5. Features …………………………………………......……........…...……

6. Specications ………………………………...……..........………....….

7. Operation Controls and Functions ……………...……..............……

7.1 Front Panel ..............................................................................

7.2 Rear Panel .…………………………………..…….......…...….…

8. Pin Denitions ……………...……................................................……

8.1 IR Cable Pin Denition ............................................................

8.2 RJ-45 Pin Denitions.................................................................

9. Connection and Installation ….………………….........…..…..…......

10. Acronyms …......................................................................................

1. Introduction

The 1 by 8 HDMI to CAT6 1.3 splitter when used with CAT6 to HDMI receivers it

will allows user to distribute a HDMI source through CAT6 cable over 45 mters.

This solution provides a direct input of one HDMI to a looped output of HDMI

and 7 CAT6 outputs – a smart way to link and display a single source to 8

different screens simultaneously. Alternatively, the HDMI output can also be

treated as an extender to connect to another HDMI splitter or cascade with

other unit in multiple layers. This unit allows user to transmit HDMI signal via

CAT6 without compression over long distance. The HDMI to CAT6 splitter also

incorporates functions like EDID, System Reset, Deep color and IR systems.

2. Applications

 One HDMI extension source with multi CAT6 to HDMI displays and one

HDMI loop through output

 Home entertainment integration

 Multi-task project presentation

 Showroom Display

 Advertising display control

 System installation control

3. Package Contents

 1 by 8 HDMI to CAT6 Splitter

 1 x IR Receiver

 1 x IR Blaster

 5V DC power supply adaptor

 Power Cord

 Operation Manual

4. System Requirements

 Input source equipment(s) with HDMI Cable(s).

 Output display device(s) with HDMI cables and or CAT 6 to HDMI receiver

with HDMI cable to display.

5. Features

 HDMI 1.3, HDCP1.1 and DVI1.0 compliant

 Deep color video up to 12bit, 1080p@60Hz

 One HDMI source connection to one HDMI output and seven CAT6 to

HDMI - allowing users to link up to eight displays simultaneously

 HDCP keysets allows each output to work independently when

connecting to a HDMI display

 Supports DVI source and DVI display by using HDMI to/from DVI adaptor

cable

 Supports LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD

Master Audio transmission (32-192kHz Fs sample rate)

 Supports a wide range of PC and HDTV resolutions from VGA to SXGA

(1280 x 1024) and 480i to 1080p.

 Selects EDID from TV mode or STD mode (this splitter)

 Deep color setting of 8 bit or 12 bit

 IR remote control

 System Reset function

 CEC Bypass

6. Specications

Frequency Bandwidth 2.25Gbps (single link)

Input Ports 1 x HDMI female port (Type A connector)

Output Ports 7 x CAT6 output Video/7 x CAT6 output DDC

1 x HDMI female port (Type A connector)

EDID STD / TV

HDMI Audio Output PCM2, 5.1, 7.1, Dolby 5.1, DTS 5.1, DD+, D-TrueHD,

DTS-HD

HDMI Cable In 1080p 8-bit (15M), 12-bit (10M)

HDMI Cable Out 1080p 8-bit (15M), 12-bit (10M)

CAT6 Cable Out 1080p 8-bit (45M), 12-bit (15M)

HDMI Resolution 480i, ~ 1080p 50/60, 1080p 24, VGA ~ SXGA

IR Frequency 20 ~ 60KHz

ESD Protection Human body model: ±8kV (air-gap discharge)

±4kV (contact discharge)

Power Supply 5VDC/6A (US/EU standards, CE/FCC/UL certied)

Dimensions (mm) 436(W) x160(D) x 44(H)

Weight(g) 2130

Chassis Material Metal

Silkscreen Color Black

Power Consumption 20W

Operating Temperature 0˚C ~ 40˚C / 32˚F ~ 104˚F

Storage Temperature -20˚C ~ 60˚C / -4˚F ~ 140˚F

Relative Humidity 20~90% RH (non-condensing)

7. Operation Controls and Functions

The following sections describe the hardware components of the unit with

installation and functionality.

7.1 Front Panel

① HDMI/DVI indicators: When LED illuminate this means the input source

is with HDMI content and when the input source is DVI the LED will not

illuminate.

② HDCP indicators: When the input source is with the HDCP protection the

HDCP LED will illuminate.

③ SYNC Indicator: The LED will illuminate when the device detected source's

signal.

④ Output LED1~8: The LED will illuminate when output display is connected

with power on.

⑤ Power LED: The LED will illuminate when power is on.

7.2 Rear Panel

① IR IN: This slot is to connect with the IR receiver cable included in the

package and use the existing source’s remote controls to control source

equipments.

② IR OUT: This slot is to connect with the IR blaster cable included in the

package and place it in front of the sources for infrared signal sending.

③ EDID Control Switcher: Switch the EDID between STD & TV. Switch to STD

to use built-in EDID or switch to TV to use TV’s EDID. Default factory setting

is on TV, leave as it is when picture is displayed properly.

Note:

1. When EDID switch to TV, the unit will detect the first HDMI output

sink’s EDID and record in the unit. If the first detected output sink is DVI

it will pass to next source until the first HDMI source been detected. The

detection priority is HDMI v1.3 > HDMI v1.2 > DVI.

①② ③ ④ ⑤ ⑥ ⑦ ⑧

⑤④① ② ③

2. When EDID switch to STD the unit will use built-in EDID which supports:

Video →1080p 8-bit or 12-bit (max)

Audio →PCM 2CH

3. The EDID selection will only activate when the unit is re-plug and power on.

④ System Reset: Switch to “ON”, the system will send the internal CEC to the

display within 8~10 minutes to force all the displays to switch to HDMI 1 input

port. Meanwhile, the source’s CEC will not functional to the system. When

switch to “OFF”, the system reset function will be terminate. Factory default is

on “OFF”.

⑤ HDMI input: This slot is for connecting the source equipment with HDMI

cables.

⑥ HDMI output: This slots is for connecting the display with HDMI Cable.

Note:

A. Cable tested with CAT-6E / 23AWG / Solid and therefore, cable with

different specication may result in different distance.

B. Cable distance tested with equipment PS3 40G, and 37" SamSung 12 bit

LCD TV.

C. Figures provided in this manual are reference gures only, actual

gures may depend on source and display use with cable specication.

⑦ Video/DDC 2~8: These slots allow you connect to the HDMI displays with

CAT6 to HDMI receiver. When more than one output are connected, the

HDMI outputs play identical video signal simultaneously.

⑧ Power: This slot is to plug the 5VDC power supply included in the package

into the unit and connect the adaptor to an AC wall outlet.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere CYP Kabel und Steckverbinder Handbücher

CYP

CYP Clux-8 Bedienungsanleitung

CYP

CYP CPLUS-V4E Bedienungsanleitung

CYP

CYP QU-4-4K22 Bedienungsanleitung

CYP

CYP CLUX-14EP Bedienungsanleitung

CYP

CYP CDPS-4KQ Bedienungsanleitung

CYP

CYP CPRO-U8T Bedienungsanleitung

CYP

CYP CDP-13DPI Bedienungsanleitung

CYP

CYP CPRO-U2T Bedienungsanleitung

CYP

CYP CHDBT-1H1CE Bedienungsanleitung

CYP

CYP CLUX-18E Bedienungsanleitung

CYP

CYP CPRO-16E Bedienungsanleitung

CYP

CYP PU-1H7HBTPL Installationshandbuch

CYP

CYP AU-D12 Bedienungsanleitung

CYP

CYP PUV-1820TX-AVLC Bedienungsanleitung

CYP

CYP CHDBT-1H7CE Bedienungsanleitung

CYP

CYP qu-2-4k22 Bedienungsanleitung

CYP

CYP PU-1H7HBTE Bedienungsanleitung

CYP

CYP CMDP-13MDPI Bedienungsanleitung

CYP

CYP DT-12 Bedienungsanleitung

CYP

CYP CHDBT-1H3CE Bedienungsanleitung

CYP

CYP CPRO-2A Bedienungsanleitung

CYP

CYP CHDBT-1H2CE Bedienungsanleitung

CYP

CYP CHDBT-1H4CPLV Bedienungsanleitung

CYP

CYP DCT-28 Bedienungsanleitung

Beliebte Kabel und Steckverbinder Handbücher anderer Marken

Philips

Philips SWA6310 Bedienungsanleitung

StarTech.com

StarTech.com CRJ4550PK Bedienungsanleitung

Nohau

Nohau EMUL-IP2K-PC Bedienungsanleitung

Foxun

Foxun SX-SP144E-HD4K2K Bedienungsanleitung

Philips

Philips SWA3305W Bedienungsanleitung

opticis

opticis Stretch DVIM1-1P0x Bedienungsanleitung

Volkswagen

Volkswagen VAS 6558A Bedienungsanleitung

NEXIBO

NEXIBO N-13 Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1784-u2dhp Bedienungsanleitung

Global Caché

Global Caché Flex Link Blaster Bedienungsanleitung

Hauppauge

Hauppauge USB-Live2 Bedienungsanleitung

Fenix

Fenix MPSV 15 Bedienungsanleitung

BEGA

BEGA 71 085 Bedienungsanleitung

Tesla

Tesla HPWC Bedienungsanleitung

GAMERON

GAMERON LUXURY TV CABLE Bedienungsanleitung

molex

molex Milli-Grid Dual row 87568 Series Bedienungsanleitung

Burndy

Burndy Continental Industries thermOweld CRE-7 Bedienungsanleitung

Chauvet DJ

Chauvet DJ Data Stream 8 Bedienungsanleitung