CYP CDPS-4KQ Bedienungsanleitung

CDPS-4KQ

1 by 4 HDMI 4K UHD TV Wall Splitter

Operation Manual

DISCLAIMERS

The information in this manual has been carefully checked and

is believed to be accurate. Cypress Technology assumes no

responsibility for any infringements of patents or other rights of third

parties which may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies

that may be contained in this document. Cypress also makes no

commitment to update or to keep current the information contained

in this document.

Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer le, in any form or by any means—

electronic, mechanical, magnetic, optical, chemical, manual, or

otherwise—without express written permission and consent from

Cypress Technology.

Version 1.1 August 2011

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or

operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts

inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU

if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person to walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufcient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE (DD/MM/YY) SUMMARY OF CHANGE

VR0 07/08/15 Preliminary Release

CONTENTS

1. Introduction............................................ 1

2. Applications........................................... 1

3. Package Contents ................................ 1

4. System Requirements............................ 1

5. Features.................................................. 2

6. Operation Controls and Functions....... 2

6.1 Front Panel ........................................2

6.2 Rear Panel.........................................3

6.3 RS-232 Protocols ...............................5

6.4 RS-232 and Telnet Commands .......6

6.5 Telnet Control .................................12

6.6 PC Application Control .................14

6.6.1 System Settings......................15

6.6.2 Connect Interface................16

6.6.3 Network Conguration.........16

6.6.4 TV Wall Setup (1) ...................17

6.6.5 TV Wall Setup (2) ...................18

6.6.6 TV Wall Setup (3) ...................19

6.6.7 I/O Setup................................20

6.6.8 Image Adjust .........................21

7. Connection Diagram .......................... 22

8. Specications ...................................... 24

8.1 Technical Specications ...............24

8.2 Supported Resolutions...................25

8.3 Output Resolution Limitations .......26

9. Acronyms ............................................. 29

1. INTRODUCTION

The 1 by 4 UHD TV Wall allows an HDMI 4K2K input source to be freely

arranged on 4 displays (TV or monitor) with bezel correction function.

Friendly control application that leads and leave the TV Wall control

system never been easier. The device supports video output timings

up to WUXGA@60RB and 1080p@60Hz, audio format up to 7.1CH

LPCM at 192kHz sampling rate based on input source EDID. All the

operation and control can be done through Telnet and RS-232.

2. APPLICATIONS

• Public Advertisement

• Digital Presentation

• Hypermarket Display

• Stock Market

3. PACKAGE CONTENTS

• 1×1 by 4 HDMI 4K UHD TV Wall Splitter

• 1×12 V/3 A DC Power Adaptor

• 1×Operation Manual

4. SYSTEM REQUIREMENTS

Input Source such as DVD/Blu-ray players or any HDMI signal and

output HD TV/displays.

5. FEATURES

• HDMI with 4K2K supported, HDCP and DVI compliant

• Output source signal to 4 displays as a full image with adjustable

Bezel Correction

• Input PC resolutions support from VGA~WUXGA and HDTV from

480i~1080p and 4K2K@24/25/30Hz

• Supports different input resolutions and output resolutions selectable

from TV wall application

• Supports AC3/DTS/Dolby Digital Plus/Dolby TrueHD/Dolby Atmos

and DTS-HD Master Audio

• Supports RS-232 and Telnet controls

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

4K UHD

POWERPOWER

1X4 UHD TV WALL CDPS-4KQ

POWER: Press POWER button to power on the unit or set to standby

mode.

When power is disconnected, presses this button and connected

the power to reset the system back to default factory setting.

When power is on, long press this button for 3 seconds, output

monitor will show “USB Host Update MCU Firmware Start…”, then

plug USB (with Firmware upgrade bin le contained) to upgrade

automatically. If monitor shows “Mass Storage Host Upgrade

Running” it means that the upgrade is proceeding, after upgrade

nished, the unit will reboot.

Note: If monitor didn’t show “Mass Storage Host Upgrade Running”,

means rmware upgrade didn’t success, please power off the unit

and try again.

6.2 Rear Panel

HDMI OUTHDMI IN

D1CBA

CONTROLSERVICE RS-232 DC 12V

1 2 3 4 5 6

HDMI IN: Connect with HDMI source equipment such as DVD/Blue-

ray players and or PC/Laptop devices.

HDMI OUT A~D: Connect with HDMI TV/displays for output image

display. It is suggest that the connection sequence should be

placed as diagram showed below for TV wall set up.

SERVICE: This slot is for rmware update use only, work in

accordantly with Power button.

CONTROL: Connect to an active network for telnet control.

Collocated with “CDPS-4KQ AP” application could do multi-device

control.

RS-232: Connect from PC/Laptop with D-Sub 9pin cables for RS-232

command sending and controlling over the device.

Note: RS-232 control system is limited to a single Video Wall unit.

Whereas Telnet can control multi-Video Wall unit.

DC 12V: Plug 12V DC power supply which included in the package

into the unit then connect the adaptor to an AC outlet.

Source

HDMI IN

RS-232

HDMI OUT

2x2 Wall

(4xDisplays)

A B

D C B A

PC/

RS-232

Control

Device

3x2 Wall

(6xDisplays)

Source

HDMI IN

Control

HDMI OUT

A B

D C B A

HDMI IN

Control

HDMI OUT

H G F E

Router

Splitter

3x3 Wall

(9xDisplays)

HDMI IN

Control

HDMI OUT

A B C

ED F

HG I

D C B A

HDMI IN

Control

HDMI OUT

HDMI IN

Control

HDMI OUT

L K J I

H G F E

Source

Splitter

Router

6.3 RS-232 Protocols

HDMI SPLITTER

►

◄

REMOTE CONTROL (PC)

Pin Denition Pin Denition

1NC 1 NC

2TxD 2RxD

3RxD 3TxD

4 NC 4 NC

5 GND 5 GND

6 NC 6 NC

7 NC 7 NC

8 NC 8 NC

9 NC 9 NC

Baud Rate: 115200bps

Data Bit: 8 bits

Parity: None

Flow Control: None

Stop Bit: 1

Inhaltsverzeichnis

Andere CYP Kabel und Steckverbinder Handbücher

CYP

CYP AU-D12 Bedienungsanleitung

CYP

CYP CPRO-U8T Bedienungsanleitung

CYP

CYP PU-1H3HBTL Bedienungsanleitung

CYP

CYP CHDBT-1H4CPLV Bedienungsanleitung

CYP

CYP CLUX-12E Bedienungsanleitung

CYP

CYP CPRO-8E Bedienungsanleitung

CYP

CYP CLUX-2 Bedienungsanleitung

CYP

CYP CLUX-1H8CAT Bedienungsanleitung

CYP

CYP CDPS-UA1H10HS Bedienungsanleitung

CYP

CYP HDBT CHDBT-1H7CL Bedienungsanleitung

CYP

CYP CPRO-2A Bedienungsanleitung

CYP

CYP CDVI-4S Bedienungsanleitung

CYP

CYP CPRO-2E Bedienungsanleitung

CYP

CYP CPRO-U8T Bedienungsanleitung

CYP

CYP CHDBX-1H1CE Bedienungsanleitung

CYP

CYP CLUX-4EN Bedienungsanleitung

CYP

CYP CDPS-UA1H2HS Bedienungsanleitung

CYP

CYP PU-1H7HBTE Bedienungsanleitung

CYP

CYP CPRO-16E Bedienungsanleitung

CYP

CYP CDPS-4S2HSS Bedienungsanleitung

CYP

CYP CDVI-2DDS Bedienungsanleitung

CYP

CYP QU-4-4K22 Bedienungsanleitung

CYP

CYP CHDBX-1H1CPL Bedienungsanleitung

CYP

CYP CLUX-4M Bedienungsanleitung

Beliebte Kabel und Steckverbinder Handbücher anderer Marken

Philips

Philips SWA6310 Bedienungsanleitung

StarTech.com

StarTech.com CRJ4550PK Bedienungsanleitung

Nohau

Nohau EMUL-IP2K-PC Bedienungsanleitung

Foxun

Foxun SX-SP144E-HD4K2K Bedienungsanleitung

Philips

Philips SWA3305W Bedienungsanleitung

opticis

opticis Stretch DVIM1-1P0x Bedienungsanleitung

Volkswagen

Volkswagen VAS 6558A Bedienungsanleitung

NEXIBO

NEXIBO N-13 Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1784-u2dhp Bedienungsanleitung

Global Caché

Global Caché Flex Link Blaster Bedienungsanleitung

Hauppauge

Hauppauge USB-Live2 Bedienungsanleitung

Fenix

Fenix MPSV 15 Bedienungsanleitung

BEGA

BEGA 71 085 Bedienungsanleitung

Tesla

Tesla HPWC Bedienungsanleitung

GAMERON

GAMERON LUXURY TV CABLE Bedienungsanleitung

molex

molex Milli-Grid Dual row 87568 Series Bedienungsanleitung

Burndy

Burndy Continental Industries thermOweld CRE-7 Bedienungsanleitung

Chauvet DJ

Chauvet DJ Data Stream 8 Bedienungsanleitung