CYP CHDBT-1H4CPLV Bedienungsanleitung

CHDBT-1H4CPLV

4K UHD+1 by 4+1 HDBaseT/HDMI Splitter

Operation Manual

DISCLAIMERS

The information in this manual has been carefully checked and

is believed to be accurate. Cypress Technology assumes no

responsibility for any infringements of patents or other rights of third

parties which may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies

that may be contained in this document. Cypress also makes no

commitment to update or to keep current the information contained

in this document.

Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer le, in any form or by any means—

electronic, mechanical, magnetic, optical, chemical, manual, or

otherwise—without express written permission and consent from

Cypress Technology.

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document are

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or

operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts

inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU

if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufcient space for air to circulate around the unit.

• Please completely disconnect the power when the unit is not in

use to avoid wasting electricity.

VERSION HISTORY

REV. DATE SUMMARY OF CHANGE

RDV1 2019/06/12 Preliminary release

CONTENTS

1. Introduction......................................................1

2. Applications.....................................................1

3. Package Contents ..........................................1

4. System Requirements......................................2

5. Features............................................................2

6. Operation Controls and Functions.................4

6.1 Front Panel................................................. 4

6.2 Rear Panel.................................................. 5

6.3 IR Cable Pinouts ........................................ 6

6.4 RS-232 Pinout and Defaults...................... 6

6.5 OSD Menu.................................................. 7

6.6 RS-232 Commands.................................. 17

7. Connection Diagram ....................................30

8. Specications ................................................31

8.1 Technical Specications ........................ 31

8.2 Video Specications............................... 32

8.3 Audio Specications............................... 34

8.3.1 Digital Audio................................... 34

8.3.2 Analog Audio................................. 34

8.4 Cable Specications .............................. 35

8.5 HDBaseT Features.................................... 36

9. Acronyms.......................................................37

1. INTRODUCTION

This 1×4+1 4K UHD HDMI Splitter provides an advanced solution for

splitting and distributing a single HDMI input (up to 4K@60Hz w/ HDMI

2.0 & HDCP 2.2) to 4 HDBaseT outputs as well as to a single HDMI

output with analog stereo audio breakout. The UHD source may be

distributed to any of four HDBaseT Receivers via a single Cat.5e/6/7

cable (up to 70m at 1080p or up to 40m at 4K). Despite HDBaseT’s

10.Gbps bandwidth limitation, 4K UHD HDMI video sources, up to and

including 4K@60Hz (4:4:4, 8-bit) as well as 10/12-bit sources with HDR,

are able to be processed and extended by the use of AVLC (Adaptive

Visually Lossless Compression) when connected to compatible AVLC

Receivers. If the connected HDBaseT Receiver can’t support AVLC,

4K@60Hz RGB/YUV 4:4:4 signals will be converted to YUV 4:2:0 or

downscaled to 1080p based on the detected EDID on each output.

This unit provides solid audio support, including bypassing 8 channel

LPCM digital audio as well as advanced Bitstream and HD Bitstream

audio formats via HDBaseT and HDMI. Additionally, an analog stereo

audio breakout output is available to provide audio to local powered

speakers (LPCM 2.0 sources only).

Standard EDID management functionality is included and the PoH

(Power over HDBaseT) feature can provide power to compatible

receivers, providing greater exibility in installations. Control is via front

panel controls with an OSD and RS-232.

2. APPLICATIONS

• Household entertainment sharing

• Lecture hall & classroom displays

• Showroom displays

• Meeting room presentations

3. PACKAGE CONTENTS

• 1× HDMI to HDBaseT/HDMI Splitter

• 1× 24V/3.75A DC Power Adapter

• 1× 3.5mm to IR Blaster Cable

• 1× Shockproof Feet (Set of 4)

• 1× Operation Manual

4. SYSTEM REQUIREMENTS

• HDMI source equipment such as a media player, video game

console or set-top box.

• Compatible HDBaseT receivers with AVLC and PoH support is

recommended.

• HDMI receiving equipment such as an HDTV, monitor or audio

amplier.

• The use of Premium High Speed HDMI cables, and industry standard

Cat.6, Cat.6a or Cat.7, is highly recommended.

5. FEATURES

• HDMI 2.0 and HDBaseT 1.0 compatible

• HDCP 1.x and HDCP 2.2 compliant

• 1×HDMI input

• 4×HDBaseT and 1×HDMI outputs

• Supports up to 4K UHD (18Gbps, 4K@50/60Hz 4:4:4, 8-bit) video input

and output

Note: Support of resolutions requiring bandwidth above 10.2Gbps

via HDBaseT requires a compatible AVLC receiver.

• Supports Deep Color input and output up to 12-bit

• Supports 10-bit and 12-bit HDR (High Dynamic Range) input/output

• HDBaseT output transmits video, audio and data over a single

Cat.5e/6/7 cable and can reach distances up to 40m/131ft at 4K

when using Cat.6a/7

• HDBaseT feature support: HD Video and Audio, PoH (PSE) and

Control (bi-directional RS-232 and IR pass-through)

• Integrated AVLC (Adaptive Visually Lossless Compression) activates

when the bandwidth requirements of the source are beyond

10.2Gbps allowing for support of sources up to 18Gbps with no loss

of visual quality

• Supports automatic 4K@60Hz RGB/YUV 4:4:4 to YUV 4:2:0 conversion

or downscaling to 1080p for compatibility with non-AVLC HDBaseT

receivers based on the detected EDID on each output

• Supports pass-through of all standard digital audio formats: 8

channel LPCM, Bitstream, and HD Bitstream

• High-quality DAC (Digital to Analog audio Conversion) with local

analog stereo audio breakout (LPCM 2.0 sources only)

• Comprehensive EDID management options

• Supports standard PoH from the unit to connected HDBaseT

receivers (compatible receivers only)

Note: The PoH function is designed for powering compatible

Receiver units only. Non-PoH Receivers will need their own power

supply. Receivers from other brands may not be compatible.

• 1U rack mounted design

• Control via front panel controls with an OSD and RS-232

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

SERVICE MENU + ENTER POWER INPUT OUTPUT

SYNC

ABCDE

PSE

AVLC

35M

UHD+1 by 4 HDBaseT with HDMI Splitter

1 2 3 4 5

1SERVICE Port: This port is reserved for rmware update use only.

2CONTROL BUTTON BLOCK

MENU Button: Press to enter the OSD menu, or to back out from

menu items.

- (MINUS) Button: Press to move down or adjust selections within

OSD menus.

+ (PLUS) Button: Press to move up or adjust selections within OSD

menus.

ENTER Button: Press to conrm a selection within the OSD or to go

deeper into a menu item.

3POWER LED: This LED will illuminate to indicate the unit is on and

receiving power.

4INPUT LED: This LED will illuminate to indicate that a live source has

been detected on the input port. When no source is detected the

LED will remain off.

5OUTPUT LEDs: These LEDs will illuminate to indicate when a valid

sink has been detected on the associated output port. When no

sink is detected the LED will remain off.

6.2 Rear Panel

HDMI IN ++LR

IR IN IR OUT RS-232 DC 24V

HDMI A

BCD

CAT 5e/6/7 OUT

OUT

ANALOG

1 2 3 4 5 6

1HDMI IN Port: Connect to HDMI source equipment such as a media

player, game console, or set-top box. DVI sources are supported

with the use of an HDMI to DVI adapter.

2ANALOG R/L Terminal Block: Connect to powered speakers or an

amplier for analog stereo audio output.

3OUTPUT PORT BLOCK

HDMI OUT E Port: Connect to an HDMI TV, monitor, or amplier for

digital video and audio output.

CAT 5e/6/7 OUT A~D Ports: Connect to compatible HDBaseT

receivers with single Cat.5e/6/7 cables for transmission of all data

signals. PoH will also be supplied to connected compatible PD

Receivers.

4IR IN Port: Connect to an IR Extender to receive local IR control

signals and extend them to devices connected to the other end

of all HDBaseT connections. Ensure that the remote being used is

within direct line-of-sight of the IR Extender.

IR OUT Port: Connect to the provided IR Blaster to transmit IR signals

from the other end of the HDBaseT connection to devices within

direct line-of-sight of the IR Blaster.

 Note:TohelpavoidpotentialsimultaneousIRsignalconicts,

IR support for each HDBaseT port and the local ports can be

conguredindividually.

5RS-232 Port: Connect to a PC, laptop, or serial controllable device

for the extension of RS-232 signals between this unit and the

connected HDBaseT receivers or to send RS-232 commands to

control the unit.

Note: Switching between local control and RS-232 extension is

conguredwithintheOSDmenu.

6DC 24V Port: Plug the 24V DC power adapter into this port and

connect it to an AC wall outlet for power.

Inhaltsverzeichnis

Andere CYP Kabel und Steckverbinder Handbücher

CYP

CYP CHDBT-1H2CE Bedienungsanleitung

CYP

CYP CLUX-14EP Bedienungsanleitung

CYP

CYP CLUX-14E Bedienungsanleitung

CYP

CYP CMDP-13MDPI Bedienungsanleitung

CYP

CYP CPRO-U8T Bedienungsanleitung

CYP

CYP CH-526RXPL Bedienungsanleitung

CYP

CYP CLUX-18W Bedienungsanleitung

CYP

CYP CPLUS-V4E Bedienungsanleitung

CYP

CYP CPRO-16E Bedienungsanleitung

CYP

CYP CLUX-18E Bedienungsanleitung

CYP

CYP CDPS-4KQ Bedienungsanleitung

CYP

CYP CLUX-18S Bedienungsanleitung

CYP

CYP CPRO-U8T Bedienungsanleitung

CYP

CYP CHDBT-1H3CL Bedienungsanleitung

CYP

CYP CLUX-4EN Bedienungsanleitung

CYP

CYP PU-1H3HBTL Bedienungsanleitung

CYP

CYP PU-1H7HBTPL Installationshandbuch

CYP

CYP CHDBT-1H3CE Bedienungsanleitung

CYP

CYP CHDMI-4M Bedienungsanleitung

CYP

CYP CDVI-4H Bedienungsanleitung

CYP

CYP CHDBT-1H1CE Bedienungsanleitung

CYP

CYP CPRO-U2T Bedienungsanleitung

CYP

CYP DCT-28 Bedienungsanleitung

CYP

CYP CHDBT-1H7CE Bedienungsanleitung

Beliebte Kabel und Steckverbinder Handbücher anderer Marken

Philips

Philips SWA6310 Bedienungsanleitung

StarTech.com

StarTech.com CRJ4550PK Bedienungsanleitung

Nohau

Nohau EMUL-IP2K-PC Bedienungsanleitung

Foxun

Foxun SX-SP144E-HD4K2K Bedienungsanleitung

Philips

Philips SWA3305W Bedienungsanleitung

opticis

opticis Stretch DVIM1-1P0x Bedienungsanleitung

Volkswagen

Volkswagen VAS 6558A Bedienungsanleitung

NEXIBO

NEXIBO N-13 Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1784-u2dhp Bedienungsanleitung

Global Caché

Global Caché Flex Link Blaster Bedienungsanleitung

Hauppauge

Hauppauge USB-Live2 Bedienungsanleitung

Fenix

Fenix MPSV 15 Bedienungsanleitung

BEGA

BEGA 71 085 Bedienungsanleitung

Tesla

Tesla HPWC Bedienungsanleitung

GAMERON

GAMERON LUXURY TV CABLE Bedienungsanleitung

molex

molex Milli-Grid Dual row 87568 Series Bedienungsanleitung

Burndy

Burndy Continental Industries thermOweld CRE-7 Bedienungsanleitung

Chauvet DJ

Chauvet DJ Data Stream 8 Bedienungsanleitung