CYP PUV-1820TX-AVLC Bedienungsanleitung

OPERATION MANUAL

PUV-1820TX-AVLC

4K2K@60 splitter (1x HDMI in/1x HDBT & HDMI Out)

DISCLAIMERS

The information in this manual has been carefully checked and is

believed to be accurate. CYP (UK) Ltd assumes no responsibility for any

infringements of patents or other rights of third parties which may result

from its use.

CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be

contained in this document. CYP (UK) Ltd also makes no commitment to

update or to keep current the information contained in this document.

CYP (UK) Ltd reserves the right to make improvements to this document

and/or product at any time and without notice.

No part of this document may be reproduced, transmitted, transcribed,

stored in a retrieval system, or any of its part translated into any language

or computer file, in any form or by any means—electronic, mechanical,

magnetic, optical, chemical, manual, or otherwise—without express

written permission and consent from CYP (UK) Ltd.

Version 1.1 August 2011

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or operate

this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of fire,

electrical shock and injury to persons.

• To prevent fire or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts inside

the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU if

it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufficient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE SUMMARY OF CHANGE

v1.00 12/02/2019 First release

CONTENTS

1. Introduction...........................................6

2. Applications ...........................................6

3. Package Contents ..................................6

4. System Requirements ...........................7

5. Features..................................................7

6. Operation Controls and Functions.......9

6.1 Front Panel................................................... 9

6.2 Rear Panel...................................................10

6.3 IR Cable Pinouts .......................................11

6.4 Serial Pinout and Defaults....................11

6.5 RS-232 Commands..................................12

7. Connection Diagram .......................... 17

8. Specifications...................................... 18

8.1 Technical Specifications ........................18

8.2 Video Specifications................................19

8.3 Audio Specifications...............................21

8.4 Cable Specifications ...............................22

8.5 HDBaseT Features....................................23

9. Acronyms............................................. 24

1. INTRODUCTION

This 1 by 2 HDMI to HDMI and HDBaseT splitter can take a single 4K

source and simultaneously deliver it to a local HDMI display as well

as to a second HDMI display up to 100m away via HDBaseT. This unit

complies with the advanced HDCP 2.2 and HDMI 2.0 standards, as well

as supporting the legacy HDCP 1.x and HDMI 1.x standards. The HDMI

input and output supports uncompressed 4K UHD HDMI sources, up to

and including 4K@60Hz (4:4:4, 8-bit) as well as 10/12-bit sources with HDR

while the HDBaseT output, despite its 10.2Gbps bandwidth limitation, is

able to process and extend the same high bandwidth sources by the use

of AVLC (Adaptive Visually Lossless Compression) when connected to a

compatible AVLC Receiver.

Built-in EDID management functionality enables the unit to t into every

situation. The HDBaseT output of this unit can also provide 48V PoH (Power

over HDBaseT) to a compatible Receiver, allowing for greater exibility

within dierent installation scenarios. The unit can be controlled via a

front panel button and RS-232.

2. APPLICATIONS

Household entertainment sharing and control

Lecture room display and control

Showroom display and control

Meeting room presentation and control

Classroom display and control

3. PACKAGE CONTENTS

1×1 by 2 HDMI to HDBaseT and HDMI Splitter

1×24V/2.7A DC Power Adapter

1×3.5mm to IR Blaster Cable

1×Shockproof Feet (Set of 4)

1×Operation Manual

4. SYSTEM REQUIREMENTS

HDMI source equipment such as a media player, video game console

or set-top box.

A compatible HDBaseT Receiver with AVLC and 48V PoH support is

recommended.

HDMI receiving equipment such as an HDTV, monitor or audio

amplier.

The use of “Premium High Speed” HDMI cables, and industry standard

Cat.6, Cat.6a or Cat.7, is highly recommended.

5. FEATURES

HDMI 2.0 and HDBaseT 1.0 compatible

HDCP 1.x and HDCP 2.2 compliant

1 HDMI input

1 HDMI and 1 HDBaseT output

Supports up to 4K UHD (18Gbps, 4K@50/60Hz 4:4:4, 8-bit) video input

and output

Note: Support of resolutions requiring bandwidth above 10.2Gbps via

HDBaseT requires a compatible AVLC Receiver.

Supports Deep Colour input and output up to 12-bit

Supports 10-bit and 12-bit HDR (High Dynamic Range) input/output

Supports CEC bypass

HDBaseT feature support: HD Video and Audio, 100BaseT Ethernet,

48V PoH (PSE) and Control (bi-directional IR/RS-232 pass-through)

HDBaseT output transmits video, audio and data over a single

Cat.5e/6/7 cable and can reach distances up to 100m/328ft at 4K

when using Cat.6a/7

Integrated AVLC (Adaptive Visually Lossless Compression) activates

when the bandwidth requirements of the source are beyond 10.2Gbps

(340MHz) allowing for support of sources up to 18Gbps (600MHz)

with no loss of visual quality

Automatic 4K to 1080p down-scaling or colour space conversion (4:4:4

to 4:2:0), as necessary, based on each connected display’s EDID

Supports pass-through of many audio formats including LPCM

2.0/5.1/7.1, Bitstream, and HD Bitstream

EDID management allows selection of an internal EDID, user EDID, or

EDID copied from a connected display

Supports standard 48V PoH from the unit to a connected HDBaseT

Receiver (compatible Receivers only)

Note: The 48V PoH function is designed for powering compatible Receiver

units only. Non-PoH Receivers will need their own power supply. Receivers

from other brands may not be compatible.

Controllable via a front panel button and RS-232

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

POWER SYNC

LINK AVLC

CONTROL

BYPASS

ISP RS-232

SERVICE

EDID INT. USER OUT

PUV-1820TX-AVLC

1 2 3 4 5 6 7 8

1POWER LED: This LED will illuminate to indicate the unit is on and

receiving power.

2SYNC LED: This LED will illuminate when a live input source is

detected.

3LINK LED: This LED will illuminate solidly when a live connection with

a compatible Receiver is active.

4AVLC LED: This LED will illuminate whenever the AVLC function is

active.

5EDID Button & LEDs: Press this button to sequentially switch through

the available EDID sources. The LED will illuminate to indicate which

EDID source is currently selected.

6SERVICE Port: This port is reserved for firmware update use only.

7ISP Pinhole: This button is reserved for factory use only.

8RS-232 CONTROL/BYPASS Switch: This switch controls the

operational mode of the RS-232 port.

ACONTROL: When set to“Control”the RS-232 port may be used to

send commands directly to the unit.

BBYPASS: When set to “Bypass”, RS-232 signals will be passed to the

connected Receiver.

6.2 Rear Panel

HDMI INHDMICAT5e/6/7

OUT

LANIR INIR OUTRS-232DC 24V

76541321

1DC24V Port: Plug the 24V DC power adapter into this port and

connect it to an AC wall outlet for power.

2RS-232 Port: Connect to a PC, laptop, or serial controllable device for

the extension of RS-232 signals between both ends of the HDBaseT

connection or to control this unit directly.

Note: The behavior of the RS-232 port is controlled by the front panel

CONTROL/BYPASS switch.

3IR OUT Port: Connect to the provided IR Blaster to transmit IR signals

from the other end of the HDBaseT connection to devices within

direct line-of-sight of the IR Blaster.

4IR IN Port: Connect to an IR Extender to receive IR control signals and

extend them to devices connected to the other end of the HDBaseT

connection. Ensure that the remote being used is within direct line-of-

sight of the IR Extender.

5LAN Port: Connect to an Ethernet supporting device or to your local

network, as appropriate, to extend the network to both ends of the

HDBaseT connection.

6OUT A (CAT5e/6/7) Port: Connect to a compatible HDBaseT Receiver

with a single Cat.5e/6/7 cable for transmission of all data signals. 48V

PoH will also be supplied to a connected compatible PD Receiver.

OUT B (HDMI) Port: Connect to an HDMI TV, monitor, or amplifier for

digital video and audio output.

7HDMI IN Port: Connect to HDMI source equipment such as a media

player, game console, or set-top box.

Inhaltsverzeichnis

Andere CYP Kabel und Steckverbinder Handbücher

CYP

CYP CLUX-18S Bedienungsanleitung

CYP

CYP CLUX-4M Bedienungsanleitung

CYP

CYP CDPS-4KQ Bedienungsanleitung

CYP

CYP DCT-28 Bedienungsanleitung

CYP

CYP CSDI-14 Bedienungsanleitung

CYP

CYP CPRO-16E Bedienungsanleitung

CYP

CYP CDPS-UA1H10HS Bedienungsanleitung

CYP

CYP Clux-8 Bedienungsanleitung

CYP

CYP CLUX-4EN Bedienungsanleitung

CYP

CYP CLUX-12CEC Bedienungsanleitung

CYP

CYP CPRO-2E Bedienungsanleitung

CYP

CYP PU-1H7HBTPL Installationshandbuch

CYP

CYP CMDP-13MDPI Bedienungsanleitung

CYP

CYP CLUX-18W Bedienungsanleitung

CYP

CYP CPLUS-V8E Bedienungsanleitung

CYP

CYP CPLUS-V2E Bedienungsanleitung

CYP

CYP CHDBT-1H3CL Bedienungsanleitung

CYP

CYP CDVI-4H Bedienungsanleitung

CYP

CYP AU-D12 Bedienungsanleitung

CYP

CYP CSDI-42 Bedienungsanleitung

CYP

CYP PU-1H3HBTL Bedienungsanleitung

CYP

CYP CDPS-UA1H10HS Bedienungsanleitung

CYP

CYP qu-2-4k22 Bedienungsanleitung

CYP

CYP CLUX-18EU Bedienungsanleitung

Beliebte Kabel und Steckverbinder Handbücher anderer Marken

Philips

Philips SWA6310 Bedienungsanleitung

StarTech.com

StarTech.com CRJ4550PK Bedienungsanleitung

Nohau

Nohau EMUL-IP2K-PC Bedienungsanleitung

Foxun

Foxun SX-SP144E-HD4K2K Bedienungsanleitung

Philips

Philips SWA3305W Bedienungsanleitung

opticis

opticis Stretch DVIM1-1P0x Bedienungsanleitung

Volkswagen

Volkswagen VAS 6558A Bedienungsanleitung

NEXIBO

NEXIBO N-13 Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1784-u2dhp Bedienungsanleitung

Global Caché

Global Caché Flex Link Blaster Bedienungsanleitung

Hauppauge

Hauppauge USB-Live2 Bedienungsanleitung

Fenix

Fenix MPSV 15 Bedienungsanleitung

BEGA

BEGA 71 085 Bedienungsanleitung

Tesla

Tesla HPWC Bedienungsanleitung

GAMERON

GAMERON LUXURY TV CABLE Bedienungsanleitung

molex

molex Milli-Grid Dual row 87568 Series Bedienungsanleitung

Burndy

Burndy Continental Industries thermOweld CRE-7 Bedienungsanleitung

Chauvet DJ

Chauvet DJ Data Stream 8 Bedienungsanleitung