CYP CPRO-4ER Bedienungsanleitung

CPRO-4ER

1×4 HDMI Splitter

Operation Manual

DISCLAIMERS

The information in this manual has been carefully checked and

is believed to be accurate. Cypress Technology assumes no

responsibility for any infringements of patents or other rights of third

parties which may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies

that may be contained in this document. Cypress also makes no

commitment to update or to keep current the information contained

in this document.

Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer le, in any form or by any means—

electronic, mechanical, magnetic, optical, chemical, manual, or

otherwise—without express written permission and consent from

Cypress Technology.

Version 1.1 August 2011

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or

operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts

inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU

if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufcient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE

VR0 30/08/13 Preliminary release

VS1 24/03/14 Updated text/diagrams

CONTENTS

1. Introduction............................................ 1

2. Applications........................................... 1

3. Package Contents ................................ 1

4. System Requirements............................ 1

5. Features.................................................. 1

6. Operation Controls and Functions....... 2

6.1 Front Panel ........................................2

6.2 Rear Panel.........................................3

7. Connection Diagram ............................ 4

8. Specications ........................................ 5

9. Acronyms ............................................... 6

1. INTRODUCTION

The 1 by 4 HDMI Splitter distributes a single HDMI input to four

simultaneous HDMI outputs and supports 4K2K, 3D, 12-bit Deep Color

as well as High Denition Lossless Audio. With its 9 Gbps bandwidth and

the additional features of the latest in HDMI standards you can be

sure of superior HDMI distribution.

2. APPLICATIONS

• Simultaneously display one HDMI source on 4 TVs/projectors

• Showroom display

• University lecture hall display

• Retail sales display

• Commercial presentation switcher/scaler

3. PACKAGE CONTENTS

• 1 by 4 HDMI Splitter

• 5 V/2.6 A DC Power Supply Adaptor

• Operation Manual

4. SYSTEM REQUIREMENTS

• HDMI equipped source devices such as a DVD/Blu-ray player with

HDMI cables or DVI to HDMI cables

• HDMI equipped displays (TV or monitors) with HDMI cables

5. FEATURES

• Supports HDTV resolutions up to 4K2K/30 Hz

• HDMI and DVI compatible

• Supports 1080p@60Hz, Deep Color 12-bit

• Supports LPCM 7.1CH, Dolby TrueHD and DTS-HD Master Audio

• Supports 3D signals

• Supports System reset and EDID selection functions

Note: For playback of 4K2K HDMI source signals, a 4K2K capable

display and High Speed HDMI cables are required.

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

234

SYNCPOWER

HDMI OUT

CPRO-4ER 4KX2K

1X4 HDMI SPLITTER

1 2 3

1POWER LED: The power LED will light up when the unit is connected

to an active power supply.

2SYNC: This LED will light up when the HDMI input port is connected

to an active source device.

3HDMI OUT LEDs: These LEDs will light up to indicate which HDMI

outputs are connected to an active TV/display/monitor.

6.2 Rear Panel

DC 5V

HDMI OUT

SYS

RESET

ON OFF

SERVICEEDID

STD TV

1234

HDMI IN

1 2 3 4 5 6

1SYS RESET ON/OFF: When switched ON (default setting is off) the

unit will, every 8~10 minutes, automatically switch all connected

displays to their HDMI Input 1.

Note: For this feature to function connected displays must support

CEC commands.

2EDID STD: When in 'STD' mode, the unit will use its own built-in EDID

settings. In this mode, the video output will be set to 1080p@60Hz

and the audio output at LPCM 2CH Stereo. Use this mode if there

are display problems in TV Mode.

EDID TV: When in 'TV' mode, the unit will read the EDID settings of

the display device connected to HDMI OUT 1. If it detects a 4K2K

capable EDID setting it will transmit the signal in that format to

all outputs. If no 4K2K capable EDID is detected then the unit will

output the best resolution that all displays can support.

Note: The unit will retain and use the EDID settings of the last device

connected to the HDMI OUT 1 output if no device is connected to

this output even after switching EDID modes or a power cycle.

3SERVICE: Manufacturer use only.

4HDMI IN: Connect the input port to the HDMI or DVI output of your

source device such as a DVD player or set-top box with an HDMI

cable.

5HDMI OUT 1~4: Connect each of the HDMI outputs to an HDMI

display for simultaneous HDMI distribution, or cascade the output

to another transmitter to extend the operating distance.

6DC 5V: Plug the 5V DC power supply into the unit and connected

the adaptor to an AC outlet.

7. CONNECTION DIAGRAM

DC 5V

HDMI OUT

SYS

RESET

ON OFF

SERVICEEDID

STDTV

1234

HDMI IN

TV/Monitor TV/Monitor

TV/MonitorTV/Monitor

Blu-ray Player

HDMI Input

Simultaneous

HDMI Outputs

Power

Supply

8. SPECIFICATIONS

Video Bandwidth 300 MHz/9 Gbps

Input Ports 1×HDMI Type A (Female), 1×USB Mini-B

(Service only)

Output Ports 4×HDMI Type A (Female)

HDMI Resolutions Up to 4K2K (3840×2160@24/25/30 Hz &

4096×2160@24 Hz)

HDMI Input Cable

Distance

15 m@1080p/8-bit, 10 m@1080p/12-bit,

5 m@4K2K

HDMI Output Cable

Distance

10 m@1080p/8-bit, 15 m@1080p/12-bit,

10 m@4K2K

Power Supply 5 V/2.6 A DC (US/EU standards, CE/FCC/UL

certied)

ESD Protection Human Body Model:

±8 kV (air-gap discharge)

±4 kV (contact discharge)

Dimensions 215 mm(W)×140 mm(D)×48 mm(H)

Weight 858 g

Chassis Material Metal

Color Black

Operating Temperature 0 ˚C ~ 40 ˚C / 32 ˚F ~ 104 ˚F

Storage Temperature −20 ˚C ~ 60 ˚C / −4 ˚F ~ 140 ˚F

Relative Humidity 20 ~ 90 % RH (non-condensing)

Power Consumption 4 W

Inhaltsverzeichnis

Andere CYP Kabel und Steckverbinder Handbücher

CYP

CYP CHDBT-1H2CE Bedienungsanleitung

CYP

CYP CPRO-2E Bedienungsanleitung

CYP

CYP CDPS-4KQ Bedienungsanleitung

CYP

CYP CPRO-U2T Bedienungsanleitung

CYP

CYP CLUX-2 Bedienungsanleitung

CYP

CYP CHDMI-4M Bedienungsanleitung

CYP

CYP CDVI-4S Bedienungsanleitung

CYP

CYP CDPS-UA1H4HS Bedienungsanleitung

CYP

CYP CPRO-8E Bedienungsanleitung

CYP

CYP CLUX-18W Bedienungsanleitung

CYP

CYP DCT-28 Bedienungsanleitung

CYP

CYP CDPS-UA1H2HS Bedienungsanleitung

CYP

CYP PUV-1H4HPL-AVLC Bedienungsanleitung

CYP

CYP CDPS-UA1H10HS Bedienungsanleitung

CYP

CYP DT-12 Bedienungsanleitung

CYP

CYP CPRO-U8T Bedienungsanleitung

CYP

CYP CHDBT-1H3CE Bedienungsanleitung

CYP

CYP CDP-13DPI Bedienungsanleitung

CYP

CYP qu-2-4k22 Bedienungsanleitung

CYP

CYP CDVI-2DDS Bedienungsanleitung

CYP

CYP CLUX-18S Bedienungsanleitung

CYP

CYP CDPS-4S2HSS Bedienungsanleitung

CYP

CYP CLUX-4M Bedienungsanleitung

CYP

CYP CPRO-2E Bedienungsanleitung

Beliebte Kabel und Steckverbinder Handbücher anderer Marken

Philips

Philips SWA6310 Bedienungsanleitung

StarTech.com

StarTech.com CRJ4550PK Bedienungsanleitung

Nohau

Nohau EMUL-IP2K-PC Bedienungsanleitung

Foxun

Foxun SX-SP144E-HD4K2K Bedienungsanleitung

Philips

Philips SWA3305W Bedienungsanleitung

opticis

opticis Stretch DVIM1-1P0x Bedienungsanleitung

Volkswagen

Volkswagen VAS 6558A Bedienungsanleitung

NEXIBO

NEXIBO N-13 Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1784-u2dhp Bedienungsanleitung

Global Caché

Global Caché Flex Link Blaster Bedienungsanleitung

Hauppauge

Hauppauge USB-Live2 Bedienungsanleitung

Fenix

Fenix MPSV 15 Bedienungsanleitung

BEGA

BEGA 71 085 Bedienungsanleitung

Tesla

Tesla HPWC Bedienungsanleitung

GAMERON

GAMERON LUXURY TV CABLE Bedienungsanleitung

molex

molex Milli-Grid Dual row 87568 Series Bedienungsanleitung

Burndy

Burndy Continental Industries thermOweld CRE-7 Bedienungsanleitung

Chauvet DJ

Chauvet DJ Data Stream 8 Bedienungsanleitung