CYP CLUX-18W Bedienungsanleitung

CLUX-18W

1 by 8 HDMI 1.3 Splitter

Operation Manual

CLUX-18W

Revision History

Version No Date Summary of Change

V1 20090209 Preliminary Release

V2 20090403 Cable Distance

1080p/8bit 10M in/15M out

1080p/12bit 6M in/10M out

Precautions

Failure to follow the precautions described below may cause damage to

1 by 8 HDMI 1.3 Splitter and void the warranty.

DO NOT open the case. Doing so will void the warranty. If you ﬁnd

problem with it, please return back to your retailer or seller who will

assist you or provide you with solution.

DO NOT use third-Party AC adapter or power cord. Doing so may

damage 1 by 8 HDMI 1.3 Splitter.

DO NOT bump, jar or drop contents of the products as it may

damage it and result in warranty void.

DO NOT set any liquids or beverages on the drive as they may

damage 1 by 8 HDMI 1.3 Splitter.

Table of Contents

1. Introduction…………………………………………................................ 1

2. Applications............................……………………………………………

3. Package contents.......………………………………………….....……. 1

4. System Requirements............……………………………….....………..

5. Features.............................……………………………………………….. 2

6. Installation............................…………………………………………….. 3

Front Panel............................…………………………………………….. 3

Bottom Panel............................………………………………………….. 4

7. Connection and Installation.............................................................. 4

8. Specifications...................................................................................... 5

1. Introduction

The HDMI v1.3 Splitter is the most advance solution for HDMI signal distribution.

This device deﬁnes and support Deep Color (8 bit & 12 bit) video with new

lossless compressed (Dolby TrueHD, Dolby Digital Plus and DTS-HD Master

Audio) digital audio, a high bandwidth up to 225MHz (6,75Gbps). Besides

splitting and distributing, the device also does signal ampliﬁcation and

equalization to provide high performance I/O of audio and video. With add

on features of EDID, CEC and system reset functions the device is made in

whole to support fully for your splitter system’s demand.

2. Applications

Multi channels simultaneously display

Show room display control

Educational demo

Installation usage

3. Package contents

1 by 8 HDMI 1.3 Splitter

Power adaptor

Operational Manual

4. System Requirements

Input source equipments with HDMI cable and output displayers with HDMI

cables.

5. Features

HDMI v1.3, HDCP1.1 and DVI1.0 compliant Receiver.

Deep Color video up to 12bit, 1080p(24/60Hz).

One HDMI source connect up to eight HDMI displays simultaneously.

HDCP keysets allows each output to work independently when

connecting to a HDMI display.

Splits a HDMI source up to eight outputs without signal loss.

Supports DVI source and DVI display by using HDMI to/from DVI adaptor

cable.

Supports LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master

Audio transmission (32-192kHz Fs sample rate).

Supports wide range of PC and HDTV resolutions from VGA to UXGA and

480i to1080p.

HDMI cable distance test with 1080p/8bit resolution, the input/output

distance can run up to 10/15 meters. If 1080p/12bit, the input/output

distance can run up to 6/10 meters.

Support EDID functionality. The unit will detect the ﬁrst HDMI/DVI output

display’s EDID and record in the unit. If the ﬁrst detect output is empty or

DVI, it will pass to the next output, until the ﬁrst HDMI/DVI display has been

detected. When users reconnects all the output displays or re-plug the

power, the system will automatically recover the EDID.

Supports xvYCC.

Supports CEC bypass.

Reset & Power bottom for system reset within 8~10min and system unity.

EDID setting bottons for fast recognition in between the source and

display.

①

④

6. Installation

Front Panel

⑤

①. HDMI OUTPUT 1~8:

Connect your LCD TV or HD monitor with

EHDMI cables.

②. EDID selection:

STD/TV – By switching to STD user can

select both deep color and audio

channels function, if switching to TV the

unit will read TV’s EDID and send the

image from source accordingly.

Note: When in STD mode the deep color

is suggest switching to 8 bit for longer

distant display.

2CH/Multi CH – Support 2 channels or

Multi audio channels audio function.

This selection is only available when EDID

is in STD mode.

Note: When Multi CH is selected TV/

display must also support Multi CH

function otherwise, TV/display will have

no audio output unless, HDMI output

②connect to AVR and then to TV/display.

8/12 bit – Support 8 or 12 bit’s deep color

function. This selection is only available

when EDID is in STD mode.

③Note: When HDMI output has both 8 bit

and 12 bit displays, to ensure all output

will display, switch to 8 bit is imply with

the ﬁrst HDMI output of 8 bit’s displayer.

On the other hand, when all output are

with the same bit’s displayer of 12 bit or

8 bit then switch the function to 12 bit or

8 bit will be proper. The splitter will not

function according to different bits’ of

display on HDMI outputs simultaneously.

③. Sys. Reset: System reset function.

It is suggest having this function switch

OFF always except when doing system

reset. By switching to ON the system will

reset HDMI output to HDMI 1 within 8~10

minutes, switching to OFF means CEC

bypass.

Note: The system reset function only

functioning when the displayer is build

with CEC function.

④. Power & LED: Power switch On/Off Red

LED illuminate when power is on.

⑤. HDMI INPUT: Connect your source

Bottom Panel

①

①. DC 5V: Plug the 5VDC power supply into

the unit and connect the adaptor to AC

wall outlet. Red LED will illuminate when

the Power is On.

7. Connection and Installation

LCD TV LCD TV

DVD / Blue Ray

Frequency bandwidth 2.25Gbps (single link)

Input port 1 x HDMI Female port

Output ports 8 x HDMI Female ports (single link)

HDMI output resolution 480i~1080p, 1080p24, VGA~UXGA

Power Supply 5VDC/3.2A (US/EU standards, CE/FCC/UL certiﬁed)

Dimensions (mm) 93 (W) x 220 (D) x 31 (H)

Weight (g) 300

Chassis Material Aluminum

Silkscreen Color Silver

Operating Temperature 0˚C~40˚C

Power Consumption 10W (max)

8. Specifications

Andere Handbücher für CLUX-18W

Inhaltsverzeichnis

Andere CYP Kabel und Steckverbinder Handbücher

CYP

CYP qu-2-4k22 Bedienungsanleitung

CYP

CYP CHDMI-4M Bedienungsanleitung

CYP

CYP CPRO-8ER Bedienungsanleitung

CYP

CYP CPRO-16E Bedienungsanleitung

CYP

CYP CLUX-18E Bedienungsanleitung

CYP

CYP CHDBT-1H3CL Bedienungsanleitung

CYP

CYP QU-4-4K22 Bedienungsanleitung

CYP

CYP CDP-13DPI Bedienungsanleitung

CYP

CYP CPRO-4ER Bedienungsanleitung

CYP

CYP CLUX-12E Bedienungsanleitung

CYP

CYP CLUX-18W Bedienungsanleitung

CYP

CYP PUV-1H4HPL-AVLC Bedienungsanleitung

CYP

CYP CLUX-4M Bedienungsanleitung

CYP

CYP CHDBX-1H1CE Bedienungsanleitung

CYP

CYP CHDBT-1H7CE Bedienungsanleitung

CYP

CYP CPRO-U2T Bedienungsanleitung

CYP

CYP CPRO-8ER Bedienungsanleitung

CYP

CYP CHDBT-1H4CPLV Bedienungsanleitung

CYP

CYP CLUX-12CEC Bedienungsanleitung

CYP

CYP CLUX-4M Bedienungsanleitung

CYP

CYP CHDBT-1H3CE Bedienungsanleitung

CYP

CYP AU-D12 Bedienungsanleitung

CYP

CYP CDPS-UA1H2HS Bedienungsanleitung

CYP

CYP Clux-8 Bedienungsanleitung

Beliebte Kabel und Steckverbinder Handbücher anderer Marken

Philips

Philips SWA6310 Bedienungsanleitung

StarTech.com

StarTech.com CRJ4550PK Bedienungsanleitung

Nohau

Nohau EMUL-IP2K-PC Bedienungsanleitung

Foxun

Foxun SX-SP144E-HD4K2K Bedienungsanleitung

Philips

Philips SWA3305W Bedienungsanleitung

opticis

opticis Stretch DVIM1-1P0x Bedienungsanleitung

Volkswagen

Volkswagen VAS 6558A Bedienungsanleitung

NEXIBO

NEXIBO N-13 Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1784-u2dhp Bedienungsanleitung

Global Caché

Global Caché Flex Link Blaster Bedienungsanleitung

Hauppauge

Hauppauge USB-Live2 Bedienungsanleitung

Fenix

Fenix MPSV 15 Bedienungsanleitung

BEGA

BEGA 71 085 Bedienungsanleitung

Tesla

Tesla HPWC Bedienungsanleitung

GAMERON

GAMERON LUXURY TV CABLE Bedienungsanleitung

molex

molex Milli-Grid Dual row 87568 Series Bedienungsanleitung

Burndy

Burndy Continental Industries thermOweld CRE-7 Bedienungsanleitung

Chauvet DJ

Chauvet DJ Data Stream 8 Bedienungsanleitung