CYP CLUX-4M Bedienungsanleitung

CLUX-4M

1x4 HDMI 1.3 with

Multi-channels Splitter

Operation Manual

CLUX-4M

Revision History

Version No Date Summary of Change

V1 20081110 Preliminary Release

V2 20090430 EDID Rephrase

Precautions

Failure to follow the precautions described below may cause damage to

multi channel splitter and void the warranty.

 DO NOT open the case. Doing so will void the warranty. If you ﬁnd

problem with it, please return back to your retailer or seller who will

assist you or provide you with solution.

 DO NOT use third-Party AC adapter or power cord. Doing so may

damage multi channel splitter.

 DO NOT bump, jar or drop contents of the products as it may

damage it and result in warranty void.

 DO NOT set any liquids or beverages on the drive as they may

damage multi channel splitter.

Table of Contents

1. Introduction…………………………………………………........……….

2. Applications…………………………..……………………................….

3. Package Contents…………….....………………….........................…

4. System Requirements……………….....………….…………........…….

5. Features…………………………………………….......……........………

6. Operation Controls and Functions…………………………………….

6.1 Front Panel ...............................................................................

6.2 Rear Panel ………………………………………….........….….…

7. Connection and Installation…………………………….........……..…

8. Specications……………………………………………...........………..

1. Introduction

This is a 4 to 2 HDMI v1.3 switcher/selector which allows 4 HDMI ports to be

switched to two independent display output. This is compatible with HDMI

v1.3 speciﬁcations, a cutting-adge technology which deﬁnes the support

to transfer Deep Color (12 bits/color) and new lossless compressed (Dolby

TrueHD, Dolby Digital Plus and DTS-HD Master Audio) digital audio, with a high

bandwidth up to 225MHz.

2. Applications

 Connect one source equipment to HDMI input and four HDMI/DVI

displayers to HDMI output for Multi-display instantly.

 For Multi-levels displays, just connect extra splitter.

 Back up display image.

3. Contents

 HDMI v1.3 DA

 Operation Manual

 5V DC power supply adaptor

4. System Requirements

HDMI input source equipment and output HDTVs.

5. Features

 HDMI 1.3, HDCP1.1 and DVI1.0 compliant.

 Deep color video up to 12bit, 1080p@(24/60)Hz.

 One HDMI source that can connect up to four HDMI displays

simultaneously.

 HDCP keysets allows each output to work independently when

connecting to a HDMI display.

 Splits a HDMI source up to four outputs without signal loss.

 Supports DVI source and DVI display by using HDMI to/from DVI adaptor

cable.

 Dolby Digital Plus, DTS digital audio transmission (32-192 kHz Fs sample

rate).

 Supports a wide range of PC and HDTV resolutions from VGA to UXGA

and 480i to 1080p.

 HDMI cable distance test with 1080p/8bits resolution the, Input/Output

can run up to 15/15 meters. If 1080p/12bits the Input/Output can run up

to 10/15 meters.

 Selects EDID from TV mode or STD mode (this splitter).

 Supports CEC bypass.

 Supports System Reset function.

①HDMI Outputs 1: Connect each of the output ports to the HDMI display.

When more than one output connected, the HDMI outputs play identical

video signal simultaneously.

②HDMI Input: Connect input port to the HDMI or DVI output of your source

equipment such as DVD player or set-top-box.

③EDID Control switcher: Default factory setting is TV, leave as it is when the

displays are working properly. Switch to STD to use built-in EDID, detail

capability in note.

④SYS. Reset: Default factory setting is "OFF". Switch to "ON" the system will

send the internal CEC to the display within 8~10 minutes, to force all the

displays switch to HDMI port 1. In the sane time, TV must Supports CEC

function in order to display accorindingly. When switch to "OFF" the

syste.

⑤Sync LED: The LED will illuminate when the HDMI source signal is

connected to the input port.

⑥Power LED Indicator: The LED will illuminate when the power is connected.

⑦Power: Plug the 5V DC power supply into the splitter and connect the

adaptor to AC wall outlet.

Note: 1. When EDID is on TV: Leave as it is if display is properly, unit will detect

the ﬁrst HDMI output source's EDID and record in the unit. If the ﬁrst

detected output source is DVI it will pass to next source, until the ﬁrst

HDMI been detected. The detection priority is HDMI v1.3>HDMI v1.2

>DVI.

2. When EDID is on STD: unit use built-in EDID

Video Supports -> 1080p 12 bit (max)

Audio Supports -> PCM2

3. Your EDID selection will only activated when the unit is replug and

power on.

6. Operation Controls and Functions

6.1 Front Panel

1 2 3 4 5 6 7

HDMI

OUTPUT

HDMI

INPUT

STD TV ON OFF

EDID SYS. Reset

SYNC

POWER

DC 5V

CLUX-4M HDMI V1.3 Splitter

Input Ports 4 x HDMI

Output Ports 2 x HDMI

Power Supply 5V/1A DC (US/EU standards, CE/FCC/UL certiﬁed)

Dimensions (mm) 206(W) x 111(D) x 32(H)

Weight(g) 248

Chassis Material Plastic

Silkscreen Color Black

Operating Temperature 0°C ~ 40°C

6.1 Rear Panel

①HDMI Outputs 2/3/4: Connect each of the output ports to the HDMI

display. When more than one output connected, the HDMI outputs play

identical video signal simultaneously.

7. Connection and Installation

8. Specications

HDMI

HDMI Cable

DVD or Set-Top-Box

HDTV HDMI display LCD TV

OR OR

HDMI

OUTPUT

HDMI

OUTPUT

HDMI

OUTPUT

3 24

20081120 MPM-CLUX4M

Home page: http://www.cypress.com.tw

CYPRESS TECHNOLOGY CO., LTD.

Inhaltsverzeichnis

Andere CYP Kabel und Steckverbinder Handbücher

CYP

CYP CDVI-2DDS Bedienungsanleitung

CYP

CYP PU-1H7HBTPL Installationshandbuch

CYP

CYP CLUX-14E Bedienungsanleitung

CYP

CYP CDPS-UA1H10HS Bedienungsanleitung

CYP

CYP CSDI-14 Bedienungsanleitung

CYP

CYP CLUX-18W Bedienungsanleitung

CYP

CYP qu-2-4k22 Bedienungsanleitung

CYP

CYP CDPS-4S2HSS Bedienungsanleitung

CYP

CYP CDPS-UA1H4HS Bedienungsanleitung

CYP

CYP CPRO-16E Bedienungsanleitung

CYP

CYP CSDI-42 Bedienungsanleitung

CYP

CYP CH-526RXPL Bedienungsanleitung

CYP

CYP CLUX-12CEC Bedienungsanleitung

CYP

CYP CPRO-8ER Bedienungsanleitung

CYP

CYP CLUX-14EP Bedienungsanleitung

CYP

CYP CPRO-8ER Bedienungsanleitung

CYP

CYP CHDBT-1H7CE Bedienungsanleitung

CYP

CYP CLUX-18S Bedienungsanleitung

CYP

CYP CHDBT-1H3CE Bedienungsanleitung

CYP

CYP CLUX-12E Bedienungsanleitung

CYP

CYP QU-18WE Bedienungsanleitung

CYP

CYP CHDBX-1H1CE Bedienungsanleitung

CYP

CYP AU-D12 Bedienungsanleitung

CYP

CYP CLUX-2 Bedienungsanleitung

Beliebte Kabel und Steckverbinder Handbücher anderer Marken

Philips

Philips SWA6310 Bedienungsanleitung

StarTech.com

StarTech.com CRJ4550PK Bedienungsanleitung

Nohau

Nohau EMUL-IP2K-PC Bedienungsanleitung

Foxun

Foxun SX-SP144E-HD4K2K Bedienungsanleitung

Philips

Philips SWA3305W Bedienungsanleitung

opticis

opticis Stretch DVIM1-1P0x Bedienungsanleitung

Volkswagen

Volkswagen VAS 6558A Bedienungsanleitung

NEXIBO

NEXIBO N-13 Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1784-u2dhp Bedienungsanleitung

Global Caché

Global Caché Flex Link Blaster Bedienungsanleitung

Hauppauge

Hauppauge USB-Live2 Bedienungsanleitung

Fenix

Fenix MPSV 15 Bedienungsanleitung

BEGA

BEGA 71 085 Bedienungsanleitung

Tesla

Tesla HPWC Bedienungsanleitung

GAMERON

GAMERON LUXURY TV CABLE Bedienungsanleitung

molex

molex Milli-Grid Dual row 87568 Series Bedienungsanleitung

Burndy

Burndy Continental Industries thermOweld CRE-7 Bedienungsanleitung

Chauvet DJ

Chauvet DJ Data Stream 8 Bedienungsanleitung