CYP CPRO-8ER Bedienungsanleitung

CPRO-8ER

4Kx2K 1 by 8 HDMI Splitter

Operation Manual

DISCLAIMERS

The information in this manual has been carefully checked and

is believed to be accurate. Cypress Technology assumes no

responsibility for any infringements of patents or other rights of third

parties which may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies

that may be contained in this document. Cypress also makes no

commitment to update or to keep current the information contained

in this document.

Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer le, in any form or by any means—

electronic, mechanical, magnetic, optical, chemical, manual, or

otherwise—without express written permission and consent from

Cypress Technology.

Version 1.0 September 2011

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or

operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts

inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU

if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufcient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE

RDV1 22/05/13 Preliminary release

RDV2 08/07/13 EDID behavior

CONTENTS

1. Introduction............................................ 1

2. Applications........................................... 1

3. Package Contents ................................ 1

4. System Requirements............................ 1

5. Features.................................................. 1

6. Operation Controls and Functions....... 2

6.1 Front Panel ........................................2

6.2 Rear Panel.........................................3

7. Connection Diagram ............................ 4

8. Specications ........................................ 5

9. Acronyms ............................................... 6

1. INTRODUCTION

This range of high performance HDMI splitters provide one HDMI in to

eight HDMI outputs and support 4Kx2K, 3D, 12-bit Deep Coloer as well

as High denition Lossless Audio. With its 9Gbps bandwidth and the

additional features of the latest HDMI standards you can be sure of

great HDMI distribution.

2. APPLICATIONS

• Simultaneously display one HDMI source on 8 TVs/projectors

• Showroom display

• University lecture hall display

• Retail sales display

• Commercial presentation switcher/scaler

3. PACKAGE CONTENTS

• 1 x 1 by 8 HDMI Splitter

• 1 x 5V DC Power Supply Adaptor

• Operation Manual

4. SYSTEM REQUIREMENTS

• HDMI equipped source devices such as a DVD/Blu-ray play with

HDMI cables or DVI to HDMI cables

• HDMI equipped displays (TV or monitors) with HDMI cables

5. FEATURES

• Supports HDTV resolutions up to 4Kx2K/30Hz

• HDMI and DVI compatible

• Supports 1080p@60Hz, Deep Color 12-bit

• Supports LPCM 7.1CH, Dolby TrueHD and DTS-HD Master Audio

• Supports 3D

• Supports System reset and EDID selection functions

Note:

Displaying HDMI 4Kx2K resolution require the standard 4Kx2K HDMI

cable and display in order for proper image displaying.

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

POWER SYNC 45678

321

HDMI OUT

CPRO-8ER 4KX2K

1X8 HDMI SPLITTER

1 2 3

1POWER LED:

Once the power supply is connected the LED will illuminate

2SYNC:

This LED will illuminate when the HDMI input port is connected to an

active source.

3HDMI OUT LEDs:

These LEDs will illuminate when HDMI output are connected to TV

or display monitor.

6.2 Rear Panel

1 2 3 4 5 6

HDMI IN

12345678

HDMI OUT

DC 5V

SYS

RESET

ON OFF

SERVICEEDID

STD TV

1SYS RESET ON/OFF:

This switch allows the user to perform a system reset. The default

setting is OFF, leave as it is when in normal use. By switching

ON, the unit will perform a reset every 8~10 minutes, in order to

perfrom this function the displays must have CEC supported.

When performed successfully, the system will automatically switch

the displays to HDMI input 1. They system reset will not perform on

those displays that do not have a CEC function.

2EDID STD/TV:

The default factory setting is on TV, leave as it is when the display

is properly. The unit will detect the 1st HDMI output’s EDID when

it obtain a 4Kx2K EDID and send out the signal accordingly to all

other output ports. If the1st HDMI output is without a 4Kx2K's EDID

the unit will detect all output's EDID and send out the signal that all

output can accept.

This device obtain the last memory function therefore, the device

will use the last output port 1's EDID when output port 1 is not

connected to a display after every power cycling or switch in

between the EDID setting.

Switch to STD to use build-in EDID if the display has problem. STD

EDID’s video at 1080p@60Hz and audio at LPCM 2CH.

3SERVICE:

This slot is reserved for factory service only.

4HDMI IN:

Connect with source equipment such as DVD/Blu-ray or PS3

player.

5HDMI OUT:

Connect to HDMI display for instant image display or cascade with

another family type transmitter.

6DC 5V:

Plug the 5V DC power supply into the unit and connected the

adaptor to an AC outlet.

7. CONNECTION DIAGRAM

HDMI IN

12345678

HDMI OUT

DC 5V

SYS

RESET

ON OFF

SERVICEEDID

STDTV

TV/Monitors

Blu-ray Player

HDMI Input

Simultaneous

HDMI Outputs

Power

Supply

Example Shown:

1by 8 HDMI

Splitter

8. SPECIFICATIONS

Video Bandwidth 300Mbps/9Gbps

Input ports 1 x Female HDMI type A,

1 x USB (Service only)

Output ports 8 x HDMI,

Resolution Up to 4Kx2K (3840x2160@24/25/30Hz/4096

x2160@24Hz)

Power Supply 5V / 3A DC (US/EU standards, CE/FCC/UL

certied)

Dimensions 436 mm(W) x 166 mm(D) x 49 mm(H)

Weight 884

Chassis Material Metal

Silkscreen Color Black

ESD Protection Human body model:

±8kV (air-gap discharge)

±4kV (contact discharge)

Operating Temperature Operating from 0°C ~ 40°C

Storage Temperature -20˚C ~ 60˚C / -4 ˚F ~ 140 ˚F

Relative Humidity 20 ~ 90% RH (non-condensing)

Power Consumption 9W

Andere Handbücher für CPRO-8ER

Inhaltsverzeichnis

Andere CYP Kabel und Steckverbinder Handbücher

CYP

CYP CPLUS-V8PT Bedienungsanleitung

CYP

CYP CLUX-18S Bedienungsanleitung

CYP

CYP CHDBT-1H2CE Bedienungsanleitung

CYP

CYP CPRO-2E Bedienungsanleitung

CYP

CYP CPRO-16E Bedienungsanleitung

CYP

CYP CPRO-U8T Bedienungsanleitung

CYP

CYP AU-D12 Bedienungsanleitung

CYP

CYP CPLUS-V4E Bedienungsanleitung

CYP

CYP CHDBT-1H7CE Bedienungsanleitung

CYP

CYP CPRO-2A Bedienungsanleitung

CYP

CYP DCT-28 Bedienungsanleitung

CYP

CYP CHDBX-1H1CPL Bedienungsanleitung

CYP

CYP CLUX-4M Bedienungsanleitung

CYP

CYP CPLUS-V2E Bedienungsanleitung

CYP

CYP CSDI-42 Bedienungsanleitung

CYP

CYP CDPS-UA1H4HS Bedienungsanleitung

CYP

CYP CHDMI-4M Bedienungsanleitung

CYP

CYP PUV-1820TX-AVLC Bedienungsanleitung

CYP

CYP CLUX-18E Bedienungsanleitung

CYP

CYP CDPS-4KQ Bedienungsanleitung

CYP

CYP CDPS-UA1H2HS Bedienungsanleitung

CYP

CYP CPRO-8ER Bedienungsanleitung

CYP

CYP CLUX-18W Bedienungsanleitung

CYP

CYP CLUX-18W Bedienungsanleitung

Beliebte Kabel und Steckverbinder Handbücher anderer Marken

Philips

Philips SWA6310 Bedienungsanleitung

StarTech.com

StarTech.com CRJ4550PK Bedienungsanleitung

Nohau

Nohau EMUL-IP2K-PC Bedienungsanleitung

Foxun

Foxun SX-SP144E-HD4K2K Bedienungsanleitung

Philips

Philips SWA3305W Bedienungsanleitung

opticis

opticis Stretch DVIM1-1P0x Bedienungsanleitung

Volkswagen

Volkswagen VAS 6558A Bedienungsanleitung

NEXIBO

NEXIBO N-13 Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1784-u2dhp Bedienungsanleitung

Global Caché

Global Caché Flex Link Blaster Bedienungsanleitung

Hauppauge

Hauppauge USB-Live2 Bedienungsanleitung

Fenix

Fenix MPSV 15 Bedienungsanleitung

BEGA

BEGA 71 085 Bedienungsanleitung

Tesla

Tesla HPWC Bedienungsanleitung

GAMERON

GAMERON LUXURY TV CABLE Bedienungsanleitung

molex

molex Milli-Grid Dual row 87568 Series Bedienungsanleitung

Burndy

Burndy Continental Industries thermOweld CRE-7 Bedienungsanleitung

Chauvet DJ

Chauvet DJ Data Stream 8 Bedienungsanleitung