CYP CSI-8H8CVTX Bedienungsanleitung

CSI-8H8CVTX

8 HDMI over CAT5e/6/7 Point-to-Point Transmitter

Operation Manual

DISCLAIMERS

The information in this manual has been carefully checked and

is believed to be accurate. Cypress Technology assumes no

responsibility for any infringements of patents or other rights of third

parties which may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies

that may be contained in this document. Cypress also makes no

commitment to update or to keep current the information contained

in this document.

Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer le, in any form or by any means—

electronic, mechanical, magnetic, optical, chemical, manual, or

otherwise—without express written permission and consent from

Cypress Technology.

Version 1.1 August 2011

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or

operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts

inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU

if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufcient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE

VR0 03/08/12 Preliminary Release

CONTENTS

1. Introduction............................................1

2. Applications...........................................1

3. Package Contents ................................1

4. System Requirements............................1

5. Features..................................................2

6. Operation Controls and Functions.......3

6.1 Front Panel........................................3

6.2 Rear Panel.........................................4

7. Connection Diagram ............................5

8. Specications ........................................7

9. Acronyms...............................................8

1. INTRODUCTION

The 8 HDMI over CAT5e/6/7 Point-to-Point Transmitter supports the

transmission of uncompressed video (up to 1080p@60 Hz/36-bit) with

multichannel digital audio from up to eight high denition sources to

up to eight CAT6 outputs. Also, the unit can be used in conjunction

with the 8×8 HDMI matrix (optional) to provide switching control,

allowing the display of any source device on any output display.

2. APPLICATIONS

• Commercial advertising and display

• Lecture room display

• Hyper market demonstration

3. PACKAGE CONTENTS

• HDMI over CAT6 Transmitter

• 1×24V/6.25 A DC Adaptor

• Operation Manual

4. SYSTEM REQUIREMENTS

• HDMI equipped input source devices

• Industry standard CAT5e/6/7 cables

5. FEATURES

• HDMI, HDCP 1.1 and DVI compliant

• Supports HDMI 3D and 4K×2K features

• Support CEC bypass

• Supports PoE (Power over Ethernet) on compatible receivers only

• Supports audio up to 7.1Ch, Dolby TrueHD and DTS-HD Master Audio

• Supports high bit-rate audio up to 192 kHz

• Supports resolutions VGA~WUXGA and 480i~1080p dependent upon

the output display’s EDID settings

• Supports uncompressed video up to 1080p@60 Hz/36-bit

• Supports extension up to 100 meters through CAT5e/6/7

• Supports 3D signal display dependent upon the output display's

EDID settings

• Supports HDMI input up to 10 meters at 8-bit resolution or 6 meters at

12-bit resolution

• 1U size design

Note: The PoE function is designed for powering compatible receiver

units only—non-PoE receivers will need their own power supply.

Receivers of another brand may not be compatible.

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

POWER

The LED will illuminate in blue when the power is on.

6.2 Rear Panel

CAT Out CAT OutCAT Out

HDMI In 1 HDMI In 2 HDMI In 3

CAT Out

HDMI In 4

CAT Out

HDMI In 5

CAT Out

HDMI In 6

CAT Out

HDMI In 7

CAT Out

HDMI In 8

CAT Out CAT OutCAT Out

HDMI In 1 HDMI In 2 HDMI In 3

CAT Out

HDMI In 4

CAT Out

HDMI In 5

CAT Out

HDMI In 6

CAT Out

HDMI In 7

CAT Out

HDMI In 8

DC 24V

V+

GND

GND GND

V+

2 3

CAT Out

Connect to the Receiver units with a single CAT5e/6/7 cable for HDMI

Audio/Video, IR, and RS-232 signals transmission.

Note: Please do not miss connect CAT5e/6/7 ports with receiver

device's LAN port doing so will destroy the device.

HDMI In 1~8

Connect to the HDMI input source devices such as a DVD player or a

Set-top Box with HDMI cables or DVI to HDMI cables.

DC 24V

Plug the 24V DC power supply into the unit and connect the

adaptor to an AC outlet. This unit will also power PoE (Power over

Ethernet) capable receiver units or non PoE receiver units.

7. CONNECTION DIAGRAM

CAT Out CATOutCAT Out

HDMI In 1 HDMI In 2 HDMI In 3

CAT Out

HDMI In 4

CAT Out

HDMI In 5

CAT Out

HDMI In 6

CAT Out

HDMI In 7

CAT Out

HDMI In 8

CAT Out CATOutCAT Out

HDMI In 1 HDMI In 2 HDMI In 3

CAT Out

HDMI In 4

CAT Out

HDMI In 5

CAT Out

HDMI In 6

CAT Out

HDMI In 7

CAT Out

HDMI In 8

DC 24V

RXRXRXRX

RXRXRX

ZONE AZONE

Power

Extender Blaster

IR 2

IR 1 RS232 Out CAT5e/6In

Link Power

Extender Blaster

IR 2

IR 1 RS232 Out CAT5e/6In

Link

ZONE C

Power

Extender Blaster

IR 2

IR 1 RS232 Out CAT5e/6In

Link

ZONE

Power

Extender Blaster

IR 2

IR 1RS232 Out CAT5e/6In

Link Power

Extender Blaster

IR 2

IR 1RS232 OutCAT5e/6In

Link Power

Extender Blaster

IR 2

IR 1 RS232 Out CAT5e/6In

Link Power

Extender Blaster

IR 2

IR 1 RS232 Out CAT5e/6In

Link

ZONE EZONE FZONE GZONE H

Power

Extender Blaster

IR 2

IR 1 RS232 Out CAT5e/6In

Link

LAN

DC 24V

IR-In

RS-232 Service

HDMI Out

HDMI In

HDMI Out

HDMI In

HDMI Out

HDMI In

HDMI Out

HDMI In

HDMI Out

HDMI In

HDMI Out

HDMI In

HDMI Out

HDMI In

HDMI Out

HDMI In

V+

GND

V+

3456 87

V+

GND

GND GND

V+

GND

GND GND

V+

GND

GND GND

V+

Receiver Units

Single

CAT 5e/6

Cable

HDMI Outputs

Displays

Source

Equipment

HDMI

Inputs

8x8 HDMI Matrix

(Optional)

Transmitter

Inhaltsverzeichnis

Andere CYP Sender Handbücher

CYP

CYP AVX-101F-TX Bedienungsanleitung

CYP

CYP IP-A750TX Bedienungsanleitung

CYP

CYP CH-506RXWP Bedienungsanleitung

CYP

CYP PRO-SDIOF-KIT Bedienungsanleitung

CYP

CYP CH-2605TXV Bedienungsanleitung

CYP

CYP PUV-1630TXWP-EU Bedienungsanleitung

CYP

CYP PU-607BD-TX Bedienungsanleitung

CYP

CYP PUV-1605S-TXWP Bedienungsanleitung

CYP

CYP CH-1529TXPLV Bedienungsanleitung

CYP

CYP CH-507TXBD: CH-507RXBD Bedienungsanleitung

CYP

CYP CHDBT-1H7CE Bedienungsanleitung

CYP

CYP PUV-1550S-RX Bedienungsanleitung

CYP

CYP CA-HDMIAT Bedienungsanleitung

CYP

CYP CH-1602TXR Bedienungsanleitung

CYP

CYP PUV-1730PLTX-AVLC Bedienungsanleitung

CYP

CYP CH-1605TXV Bedienungsanleitung

CYP

CYP PU-1H7HBTL Bedienungsanleitung

CYP

CYP CH-501RX Bedienungsanleitung

CYP

CYP CH-1107 TX Bedienungsanleitung

CYP

CYP IP-7000TX Installationshandbuch

CYP

CYP PU-501 Bedienungsanleitung

CYP

CYP PUV-1620S-TX Bedienungsanleitung

CYP

CYP PU-USB2-KIT Bedienungsanleitung

CYP

CYP CA-HDMIAT Bedienungsanleitung

Beliebte Sender Handbücher anderer Marken

NIVELCO

NIVELCO EasyTREK SCA-300 Series Betriebsanleitung

Honeywell

Honeywell 5816WMBR Bedienungsanleitung

Kamstrup

Kamstrup READy MTU Betriebsanleitung

Omega

Omega ZW Series Bedienungsanleitung

ABB

ABB Field 264H Leitfaden

Alinco

Alinco DJ-V17T Bedienungsanleitung

Dejero

Dejero EnGo 3x Bedienungsanleitung

Rosemount

Rosemount 4600 Bedienungsanleitung

Speaka Professional

Speaka Professional 2342740 Bedienungsanleitung

trubomat

trubomat GAB 1000 Bedienungsanleitung

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Bedienungsanleitung

Rondish

Rondish UT-11 Bedienungsanleitung

MG 10JRE Bedienungsanleitung

Burkert

Burkert 8177 Bedienungsanleitung

Firetide

Firetide HotPort 3203 Handbuch

Tele Radio

Tele Radio T9-02 Bedienungsanleitung

Rotronic

Rotronic HygroFlex HF3 Series Bedienungsanleitung

Jamara

Jamara FCX6 Pro Tel Bedienungsanleitung