Cypress PSoC CY8CKIT-048 Bedienungsanleitung

CY8CKIT-048

PSoC®Analog Coprocessor Pioneer

Kit Guide

Doc. # 002-11190 Rev. *B

Cypress Semiconductor

198 Champion Court

San Jose, CA 95134-1709

www.cypress.com

Copyrights

PSoC Analog Coprocessor Pioneer Kit Guide, Doc. # 002-11190 Rev. *B 2

and its subsidiaries, including Spansion LLC (“Cypress”). This document, including any software or firmware included or ref-

erenced in this document (“Software”), is owned by Cypress under the intellectual property laws and treaties of the United

States and other countries worldwide. Cypress reserves all rights under such laws and treaties and does not, except as spe-

cifically stated in this paragraph, grant any license under its patents, copyrights, trademarks, or other intellectual property

rights. If the Software is not accompanied by a license agreement and you do not otherwise have a written agreement with

Cypress governing the use of the Software, then Cypress hereby grants you a personal, non-exclusive, nontransferable

license (without the right to sublicense) (1) under its copyright rights in the Software (a) for Software provided in source code

form, to modify and reproduce the Software solely for use with Cypress hardware products, only internally within your organi-

zation, and (b) to distribute the Software in binary code form externally to end users (either directly or indirectly through

resellers and distributors), solely for use on Cypress hardware product units, and (2) under those claims of Cypress’s patents

that are infringed by the Software (as provided by Cypress, unmodified) to make, use, distribute, and import the Software

solely for use with Cypress hardware products. Any other use, reproduction, modification, translation, or compilation of the

Software is prohibited.

TO THE EXTENT PERMITTED BY APPLICABLE LAW, CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR

IMPLIED, WITH REGARD TO THIS DOCUMENT OR ANY SOFTWARE OR ACCOMPANYING HARDWARE, INCLUDING,

BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PUR-

POSE. To the extent permitted by applicable law, Cypress reserves the right to make changes to this document without fur-

ther notice. Cypress does not assume any liability arising out of the application or use of any product or circuit described in

this document. Any information provided in this document, including any sample design information or programming code, is

provided only for reference purposes. It is the responsibility of the user of this document to properly design, program, and test

the functionality and safety of any application made of this information and any resulting product. Cypress products are not

designed, intended, or authorized for use as critical components in systems designed or intended for the operation of weap-

ons, weapons systems, nuclear installations, life-support devices or systems, other medical devices or systems (including

resuscitation equipment and surgical implants), pollution control or hazardous substances management, or other uses where

the failure of the device or system could cause personal injury, death, or property damage (“Unintended Uses”). A critical

component is any component of a device or system whose failure to perform can be reasonably expected to cause the failure

of the device or system, or to affect its safety or effectiveness. Cypress is not liable, in whole or in part, and you shall and

hereby do release Cypress from any claim, damage, or other liability arising from or related to all Unintended Uses of Cypress

products. You shall indemnify and hold Cypress harmless from and against all claims, costs, damages, and other liabilities,

including claims for personal injury or death, arising from or related to any Unintended Uses of Cypress products.

Cypress, the Cypress logo, Spansion, the Spansion logo, and combinations thereof, WICED, PSoC, CapSense, EZ-USB, F-

RAM, and Traveo are trademarks or registered trademarks of Cypress in the United States and other countries. For a more

complete list of Cypress trademarks, visit cypress.com. Other names and brands may be claimed as property of their respec-

tive owners.

PSoC Analog Coprocessor Pioneer Kit Guide, Doc. # 002-11190 Rev. *B 3

Contents

Safety Information 4

1. Introduction 5

1.1 Kit Contents .................................................................................................................6

1.2 Board Details ...............................................................................................................7

1.3 PSoC Creator ..............................................................................................................9

1.4 Getting Started...........................................................................................................12

1.5 Additional Learning Resources..................................................................................12

1.6 Technical Support......................................................................................................13

1.7 Documentation Conventions......................................................................................13

1.8 Acronyms...................................................................................................................13

2. Software Installation 15

2.1 Before You Begin.......................................................................................................15

2.2 Install Software ..........................................................................................................15

2.3 Uninstall Software......................................................................................................17

3. Kit Operation 18

3.1 Theory of Operation...................................................................................................18

3.2 Flexible Prototyping ...................................................................................................32

3.3 KitProg2 Functions ....................................................................................................34

4. Code Examples 36

4.1 Using the Kit Code Example......................................................................................36

4.2 Code Examples .........................................................................................................38

A. Appendix 39

A.1 Schematics ................................................................................................................39

A.2 Hardware Functional Description...............................................................................39

A.3 Using the FM24V10 F-RAM.......................................................................................44

A.4 Migrating Projects Across Different Pioneer Series Kits............................................47

A.5 Bill of Materials ..........................................................................................................51

Revision History 52

PSoC Analog Coprocessor Pioneer Kit Guide, Doc. # 002-11190 Rev. *B 4

Safety Information

The CY8CKIT-048 PSoC®Analog Coprocessor Pioneer Kit is intended for use as a development

platform for hardware or software in a laboratory environment. The board is an open system design,

which does not include a shielded enclosure. For this reason, the board may cause interference with

other electrical or electronic devices in close proximity. In a domestic environment, this product may

cause radio interference. In such cases, the user may be required to take adequate preventive

measures. Also, this board should not be used near any medical equipment or RF devices.

Attaching additional wiring to this product or modifying the product operation from the factory default

may affect its performance and cause interference with other apparatus in the immediate vicinity. If

such interference is detected, suitable mitigating measures should be taken.

The PSoC Analog Coprocessor Pioneer Kit, as shipped from the factory, has been verified to meet

with the requirements of CE as a Class A product.

General Safety Instructions

ESD Protection

ESD can damage boards and associated components. Cypress recommends that the user perform

procedures only at an ESD workstation. If an ESD workstation is not available, use appropriate ESD

protection by wearing an antistatic wrist strap attached to a grounded metal object.

Handling Boards

PSoC Analog Coprocessor Pioneer Kit is sensitive to ESD. Hold the board only by its edges. After

removing the board from the box, place it on a grounded, static-free surface. Use a conductive foam

pad if available. Do not slide the board over any surface.

The PSoC Analog Coprocessor Pioneer Kit contains ESD-sensitive devices.

Electrostatic charges readily accumulate on the human body and any

equipment which can cause a discharge without detection. Permanent damage

may occur to devices subjected to high-energy discharges. Proper ESD

precautions are recommended to avoid performance degradation or loss of

functionality. Store unused PSoC Analog Coprocessor Pioneer Kit in the

protective shipping package.

End-of-Life/Product Recycling

The end-of-life cycle for this kit is five years from the date of manufacture mentioned

on the back of the box. Contact the nearest recycler to discard the kit.

PSoC Analog Coprocessor Pioneer Kit Guide, Doc. # 002-11190 Rev. *B 5

1. Introduction

Thank you for your interest in the CY8CKIT-048 PSoC®Analog Coprocessor Pioneer Kit. This kit

enables you to evaluate and develop your application using the PSoC Analog Coprocessor device

family. The PSoC Analog Coprocessor simplifies the design of sensor-based systems by delivering a

scalable and reconfigurable architecture that integrates programmable Analog Front Ends (AFEs). It

has a signal processing engine (32-bit ARM® Cortex®-M0+) to calibrate and tune the AFE in

software. Additionally, the PSoC Analog Coprocessor enables applications to send aggregated, pre-

processed, and formatted sensor data over serial communication interfaces to host processors.

Systems that use multiple analog sensors usually require multiple specialized ICs to implement the

AFE, which increases BOM cost and PCB size. Systems designed for IoT applications must

combine data from multiple sensors to enable new sensing capabilities, commonly known as sensor

fusion. Sensor fusion solutions often require custom AFEs. The PSoC Analog Coprocessor reduces

the need for specialized ICs, offering the ability to create custom AFEs in a single-chip solution.

Figure 1-1 shows the analog sensors interface on PSoC Analog Coprocessor Pioneer Kit.

The PSoC Analog Coprocessor Pioneer Kit offers footprint-compatibility with Arduino™ shields and

baseboards. This kit features five analog sensors. They are pyroelectric infrared (PIR) motion

sensor, thermistor, humidity sensor, ambient light sensor (ALS), and inductive proximity sensor

(IPS). It has an RGB LED, two user-configurable push-button switches, one reset push-button

switch, an onboard programmer/debugger with USB-UART/I2C bridge, and a Cypress F-RAM™.

This kit supports operating voltages of 1.8 V, 3.0 V, 3.3 V, or 5 V.

If you are new to PSoC Creator, see the documentation on the PSoC Creator home page. You can

also refer the application note, AN211293 – Getting Started with PSoC Analog Coprocessor, which

gives an introduction to the PSoC Analog Coprocessor.

Figure 1-1. Analog Sensors

PSoC Analog Coprocessor Pioneer Kit Guide, Doc. # 002-11190 Rev. *B 6

Introduction

1.1 Kit Contents

The PSoC Analog Coprocessor Pioneer Kit contains the following:

■PSoC Analog Coprocessor Pioneer board

■USB Standard-A to Mini-B cable

■Four jumper wires (4 inches each)

■Five connectors (one 10x1, two 8x1, one 6x1, and one 4x1)

■One metal disk

■Quick Start Guide

Figure 1-2. Kit Contents

Inspect the contents of the kit; if you find any part missing, contact your nearest Cypress sales office

for help: www.cypress.com/support.

PSoC Analog Coprocessor Pioneer Kit Guide, Doc. # 002-11190 Rev. *B 7

Introduction

1.2 Board Details

As shown in Figure 1-3, the PSoC Analog Coprocessor Pioneer Kit features five onboard sensors.

The kit has two user buttons and an RGB LED. It also has a reset button, a power LED, and three

status LEDs. The kit can be powered from three power sources: USB, coin cell, or an external power

supply. Refer to Power Supply System on page 40 for details. There is a power selection jumper

(J9), which allows you to select the kit operating voltage. The kit can operate at 1.8 V, 3.3 V, or 5 V

when powered from the USB connector or external power supply and will operate at 3.0 V when

powered from the coin cell. The USB connector is used as a power source and for programming and

debugging your application on the PSoC Analog Coprocessor.

Figure 1-3. PSoC Analog Coprocessor Pioneer Kit Top View

PSoC Analog Coprocessor Pioneer Kit Guide, Doc. # 002-11190 Rev. *B 8

Introduction

Figure 1-4. PSoC Analog Coprocessor Pioneer Board Pinout

Table 1-1. Jumpers/Switches Default Position

Jumper/Switch Purpose Default Position

J9 System Power (VDD Voltage) Selection 1–2 (3.3V)

J14 Shunt Selection for Current Measurement 3–4 (NO SHUNT)

J17 Humidity Sensor Calibration 1–2 (SENSOR

CONNECTED)

SW4 VDD Source Selection REG

SW5 Power Domain Monitor Selection DIGITAL

PSoC Analog Coprocessor Pioneer Kit Guide, Doc. # 002-11190 Rev. *B 9

Introduction

1.3 PSoC Creator

PSoC Creator is a free Windows-based Integrated Design Environment (IDE). It enables concurrent

hardware and firmware design of systems based on PSoC 3, PSoC 4, PSoC 5LP, and PSoC Analog

Coprocessor. See Figure 1-5. With PSoC Creator, you can:

1. Drag and drop Components to build your hardware system design in the main design workspace

2. Co-design your application firmware with the PSoC hardware

3. Configure Components using configuration tools

4. Explore the library of 100+ Components

5. Review Component data sheets

Figure 1-5. PSoC Creator Features

PSoC Creator also enables you to tap into an entire tool ecosystem with integrated compiler chains

and production programmers for PSoC devices.

For more information, visit www.cypress.com/psoccreator.

PSoC Creator Code Examples

PSoC Creator includes a large number of code examples. These examples are accessible from the

PSoC Creator Start page, as shown in Figure 1-6.

Code examples can speed up your design process by starting you off with a complete design,

instead of a blank page. The code examples also show how to use PSoC Creator Components for

various applications. Code examples and documentation are included, as shown in Figure 1-7.

In the Find Example Project dialog shown in Figure 1-7, you have several options:

■Filter for examples based on a device family or keyword.

■Select from the list of examples offered based on the Filter Options.

■View the project documentation for the selection (on the Documentation tab).

■View the code for the selection on the Sample Code tab. You can also copy and paste code from

this window to your project, which can help speed up code development.

PSoC Analog Coprocessor Pioneer Kit Guide, Doc. # 002-11190 Rev. *B 10

Introduction

■Create a new workspace for the code example or add to your existing workspace. This can speed

up your design process by starting you off with a complete, basic design. You can then adapt that

design to your application.

Figure 1-6. Code Examples in PSoC Creator

Andere Handbücher für PSoC CY8CKIT-048

Inhaltsverzeichnis

Andere Cypress Mikrocontroller Handbücher

Cypress

Cypress S29XS128R Bedienungsanleitung

Cypress

Cypress PSoC CY8CTMG20 Series Produkthandbuch

Cypress

Cypress CY8CKIT-040 PSoC 4000 Pioneer Kit Bedienungsanleitung

Cypress

Cypress FM4-U120-9B560 Bedienungsanleitung

Cypress

Cypress CY3652 Bedienungsanleitung

Cypress

Cypress S6J3200 Series Bedienungsanleitung

Cypress

Cypress CY8CKIT-042-BLE Bedienungsanleitung

Cypress

Cypress CY15FRAMKIT-002 Bedienungsanleitung

Cypress

Cypress CY3274 Bedienungsanleitung

Cypress

Cypress CapSense Plus CY3280-CPM1 Bedienungsanleitung

Cypress

Cypress FM3 Series Bedienungsanleitung

Cypress

Cypress MB95580H Series Bedienungsanleitung

Cypress

Cypress CY8CKIT-016 Bedienungsanleitung

Cypress

Cypress UNIVERSAL CAPSENS CY3280-BBM Bedienungsanleitung

Cypress

Cypress CY3641 Bedienungsanleitung

Cypress

Cypress PSoC CY8CKIT-008 Bedienungsanleitung

Cypress

Cypress WirelessUSB N:1 DVK Bedienungsanleitung

Cypress

Cypress CY8CKIT-026 Bedienungsanleitung

Cypress

Cypress PSoC 3 Bedienungsanleitung

Cypress

Cypress CY3660 enCoRe V Bedienungsanleitung

Cypress

Cypress CY8CKIT-042-BLE Bedienungsanleitung

Cypress

Cypress PSoC CY8CKIT-048 Bedienungsanleitung

Cypress

Cypress FM4 Series Bedienungsanleitung

Cypress

Cypress CY8CKIT-042-BLE-A Bedienungsanleitung

Beliebte Mikrocontroller Handbücher anderer Marken

AMS

AMS AS7261 Demo Kit Bedienungsanleitung

Novatek

Novatek NT6861 Bedienungsanleitung

Espressif Systems

Espressif Systems ESP8266 SDK Einrichtungshandbuch

Nuvoton

Nuvoton ISD61S00 ChipCorder Leitfaden

STMicrolectronics

STMicrolectronics ST7 Assembler Linker Bedienungsanleitung

Texas Instruments

Texas Instruments Chipcon CC2420DK Bedienungsanleitung

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM Bedienungsanleitung

NEC

NEC 78GK0S/K 1+ Series Montage- und Bedienungsanleitung

Mikroe

Mikroe SEMITECH N-PLC Click Montage- und Bedienungsanleitung

Intel

Intel Agilex Bedienungsanleitung

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE Bedienungsanleitung

Texas Instruments

Texas Instruments TMS320F2837 D Series Bedienungsanleitung

CYPRES

CYPRES CY14NVSRAMKIT-001 Bedienungsanleitung

Texas Instruments

Texas Instruments INA-DUAL-2AMP-EVM Bedienungsanleitung

Espressif Systems

Espressif Systems ESP8266EX Betriebsanleitung

Abov

Abov AC33M8128L Bedienungsanleitung

Laird

Laird BL654PA Bedienungsanleitung

Silicon Laboratories

Silicon Laboratories C8051F800 Bedienungsanleitung