Cypress CapSense Plus CY3280-CPM1 Bedienungsanleitung

CY3280-CPM1 CapSense® Plus Module

Development Kit Quick Start Guide

Doc. # 001-51974 Rev. *A

Cypress Semiconductor

198 Champion Court

San Jose, CA 95134-1709

Phone (USA): 800.858.1810

Phone (Intnl): 408.943.2600

http://www.cypress.com

Semiconductor Corp. All other trademarks or registered trademarks referenced herein are property of the

respective corporations.

Cypress Semiconductor Corporation

198 Champion Ct., San Jose, CA 95134 USA

www.cypress.com

If you have questions, call

Cypress Customer Support

+1 (800) 541-4736 Ext. 8 (in the USA),

+1 (408) 943-2600 Ext. 8 (International),

or visit www.cypress.com/go/support

Doc. # 001-51974 Rev. *A

3. Program the RTC lab hex file to the CY3280-22x45 board. Refer to the quick start

guide of CY3280-22x45 UCC board for detailed program procedure.

4. Unplug the MiniProg from the CY3280-22x45 board.

5. Disconnect JP3 and JP4 of CY3280-CPM1 board.

6. Power the CY3280-22x45 board.

5. Test the Board

The elapsed time is displayed on the LED panel in real time. You can also test the

board with the other code examples available on the CD.

6. Design Support and Resources

A wealth of information about PSoC Designer™ and CapSense are available on

www.cypress.com. For knowledge base articles, customer forums, and online

application support, visit www.cypress.com/support.

Downloaded from Arrow.com.

1. Kit Contents

Each CY3280-CPM1 CapSense®Plus Module Development Kit contains:

■CY3280-CPM1 CapSense Plus Module Board

■CY3280-CPM1 Kit CD

■Quick Start Guide

Universal CapSense Module boards are available for purchase separately. For more

information, visit http://www.cypress.com/shop.

Prerequisites:

■CY3280-22x45/CY3280-28xxx Universal CapSense Controller Board

■PSoC MiniProg

■USB Mini-B Cable

2. Module Hardware

Buttons

Thermistor

40-Pin

Connector

Loopback Jumper for

SPI Communication Potentiometer

Reserved for

Speaker Driver

Reserved for

Speaker

LED Bar

LEDs

LED Panel

Reserved for

Thermocouple

Page 2 Page 3

The module board consists of an LED panel, a potentiometer, an LED bar, six LEDs, a

thermistor, and two buttons. These are interfaced to the CapSense Controller board

via a 40-pin receptacle connector (J2). The board also consists of two loop-back

connection jumpers (JP3 and JP4) to demonstrate the variable length SPI master-

slave communication.

3. Getting Started

CY3280-CPM1 kit can be connected to the CY3280-22x45 or CY3280-28xxx

Universal CapSense Controller boards. Insert the kit CD into the CD/DVD drive of your

PC and follow the instructions to complete the installation.

4. Board Setup

This section uses one example firmware to demonstrate the setup of CY3280-CPM1

with CY3280-20x45 Universal CapSense Controller board. Similar procedure is

followed for the CY3280-28xxx board. Refer to the CY3280-CPM1 kit guide for more

examples.

4.1 Real Time Clock (RTC) Setup

1. Connect the CY3280-CPM1 board to the CY3280-22x45 Universal CapSense

Controller board's P2 receptacle connector.

2. Connect your PC to the CY3280-22x45 Universal CapSense Controller board's

ISSP connector (J3) using a PSoC MiniProg and an USB cable.

Downloaded from Arrow.com.Downloaded from Arrow.com.

1. Kit Contents

Each CY3280-CPM1 CapSense®Plus Module Development Kit contains:

■CY3280-CPM1 CapSense Plus Module Board

■CY3280-CPM1 Kit CD

■Quick Start Guide

Universal CapSense Module boards are available for purchase separately. For more

information, visit http://www.cypress.com/shop.

Prerequisites:

■CY3280-22x45/CY3280-28xxx Universal CapSense Controller Board

■PSoC MiniProg

■USB Mini-B Cable

2. Module Hardware

Buttons

Thermistor

40-Pin

Connector

Loopback Jumper for

SPI Communication Potentiometer

Reserved for

Speaker Driver

Reserved for

Speaker

LED Bar

LEDs

LED Panel

Reserved for

Thermocouple

Page 2 Page 3

The module board consists of an LED panel, a potentiometer, an LED bar, six LEDs, a

thermistor, and two buttons. These are interfaced to the CapSense Controller board

via a 40-pin receptacle connector (J2). The board also consists of two loop-back

connection jumpers (JP3 and JP4) to demonstrate the variable length SPI master-

slave communication.

3. Getting Started

CY3280-CPM1 kit can be connected to the CY3280-22x45 or CY3280-28xxx

Universal CapSense Controller boards. Insert the kit CD into the CD/DVD drive of your

PC and follow the instructions to complete the installation.

4. Board Setup

This section uses one example firmware to demonstrate the setup of CY3280-CPM1

with CY3280-20x45 Universal CapSense Controller board. Similar procedure is

followed for the CY3280-28xxx board. Refer to the CY3280-CPM1 kit guide for more

examples.

4.1 Real Time Clock (RTC) Setup

1. Connect the CY3280-CPM1 board to the CY3280-22x45 Universal CapSense

Controller board's P2 receptacle connector.

2. Connect your PC to the CY3280-22x45 Universal CapSense Controller board's

ISSP connector (J3) using a PSoC MiniProg and an USB cable.

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

CY3280-CPM1 CapSense® Plus Module

Development Kit Quick Start Guide

Doc. # 001-51974 Rev. *A

Cypress Semiconductor

198 Champion Court

San Jose, CA 95134-1709

Phone (USA): 800.858.1810

Phone (Intnl): 408.943.2600

http://www.cypress.com

Semiconductor Corp. All other trademarks or registered trademarks referenced herein are property of the

respective corporations.

Cypress Semiconductor Corporation

198 Champion Ct., San Jose, CA 95134 USA

www.cypress.com

If you have questions, call

Cypress Customer Support

+1 (800) 541-4736 Ext. 8 (in the USA),

+1 (408) 943-2600 Ext. 8 (International),

or visit www.cypress.com/go/support

Doc. # 001-51974 Rev. *A

3. Program the RTC lab hex file to the CY3280-22x45 board. Refer to the quick start

guide of CY3280-22x45 UCC board for detailed program procedure.

4. Unplug the MiniProg from the CY3280-22x45 board.

5. Disconnect JP3 and JP4 of CY3280-CPM1 board.

6. Power the CY3280-22x45 board.

5. Test the Board

The elapsed time is displayed on the LED panel in real time. You can also test the

board with the other code examples available on the CD.

6. Design Support and Resources

A wealth of information about PSoC Designer™ and CapSense are available on

www.cypress.com. For knowledge base articles, customer forums, and online

application support, visit www.cypress.com/support.

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

Andere Cypress Mikrocontroller Handbücher

Cypress

Cypress S6E2DH series Bedienungsanleitung

Cypress

Cypress MB96300 Series Bedienungsanleitung

Cypress

Cypress PSoC CY8CKIT-062-WiFi-BT Bedienungsanleitung

Cypress

Cypress CY3274 Bedienungsanleitung

Cypress

Cypress PSoC 4 M Series Bedienungsanleitung

Cypress

Cypress CYW9P62S1-43438EVB-01 Bedienungsanleitung

Cypress

Cypress CY8CKIT-059 PSoC 5LP Prototyping Kit Bedienungsanleitung

Cypress

Cypress CY3276 Bedienungsanleitung

Cypress

Cypress CY3274 Beilage

Cypress

Cypress PSOC 3 FIRSTTOUCH STARTER KIT Bedienungsanleitung

Cypress

Cypress S29XS128R Bedienungsanleitung

Cypress

Cypress MB95310L Series Bedienungsanleitung

Cypress

Cypress CY8CKIT-042-BLE Bedienungsanleitung

Cypress

Cypress CY3274 Bedienungsanleitung

Cypress

Cypress CY3660 enCoRe V Bedienungsanleitung

Cypress

Cypress MB9BF564K Bedienungsanleitung

Cypress

Cypress FR MB91460 Series Betriebsanleitung

Cypress

Cypress PSoC CY8CKIT-048 Bedienungsanleitung

Cypress

Cypress CY14NVSRAMKIT-001 Bedienungsanleitung

Cypress

Cypress CY15FRAMKIT-002 Bedienungsanleitung

Cypress

Cypress EZ-PD CY4502 Bedienungsanleitung

Cypress

Cypress FM0+ S6E1C SERIES Bedienungsanleitung

Cypress

Cypress CY4531 EZ-PD CCG3 EVK Bedienungsanleitung

Cypress

Cypress Traveo S6J32E Series Bedienungsanleitung

Beliebte Mikrocontroller Handbücher anderer Marken

AMS

AMS AS7261 Demo Kit Bedienungsanleitung

Novatek

Novatek NT6861 Bedienungsanleitung

Espressif Systems

Espressif Systems ESP8266 SDK Einrichtungshandbuch

Nuvoton

Nuvoton ISD61S00 ChipCorder Leitfaden

STMicrolectronics

STMicrolectronics ST7 Assembler Linker Bedienungsanleitung

Texas Instruments

Texas Instruments Chipcon CC2420DK Bedienungsanleitung

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM Bedienungsanleitung

NEC

NEC 78GK0S/K 1+ Series Montage- und Bedienungsanleitung

Mikroe

Mikroe SEMITECH N-PLC Click Montage- und Bedienungsanleitung

Intel

Intel Agilex Bedienungsanleitung

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE Bedienungsanleitung

Texas Instruments

Texas Instruments TMS320F2837 D Series Bedienungsanleitung

CYPRES

CYPRES CY14NVSRAMKIT-001 Bedienungsanleitung

Texas Instruments

Texas Instruments INA-DUAL-2AMP-EVM Bedienungsanleitung

Espressif Systems

Espressif Systems ESP8266EX Betriebsanleitung

Abov

Abov AC33M8128L Bedienungsanleitung

Laird

Laird BL654PA Bedienungsanleitung

Silicon Laboratories

Silicon Laboratories C8051F800 Bedienungsanleitung