D-Link WL-211F Bedienungsanleitung

D-Link Air DCF-660W

2.4 GHz Wireless Compact Flash Adapter

Manual

Rev. 041202

Building Networks for People

Contents

Package Contents ....................................................3

Introduction ...............................................................4

Wireless Basics ........................................................5

Getting Started..........................................................8

Using the Configuration Utility ................................ 11

Troubleshooting ......................................................17

Technical Specifications..........................................18

Contacting Technical Support .................................20

Limited Warranty and Registration..........................21

Package Contents

Link/Power LED

Antenna

Contents of Package:

• D-Link Air DCF-660W 2.4GHz Wireless Compact Flash Adapter

• Manual, Drivers, and Utility on CD

• Quick Installation Guide (printed)

If any of the above items are missing, please contact your reseller.

System Requirements:

• PDA with Windows CE 3.0/Pocket PC 2002 with at least 32 MB of

memory

• Compact Flash Type I or Type II slot

• A computer with Microsoft Active Sync installed

• An 802.11b Access Point (e.g., DWL-1000AP for Infrastructure

Mode) or another 802.11b wireless adapter (e.g., DWL-650 for Ad-

Hoc mode.)

Introduction

The D-Link Air DCF-660W 2.4GHz Wireless Compact Flash Adapter is a

standard Type II CF interface adapter (backwards compatible to Type I)

integrated with WLAN (Wireless Local Area Network) technology.

It provides an easy and quick way to access a wireless network.

With up to 11 Mbps connection speed, the DCF-660W provides a fast

connection when accessing a corporate network or the Internet in a wireless

environment. When installed, the DCF-660W is able to communicate with

existing 802.11b wireless networks at home, at the office, or in public areas

such as airports and coffee shops where wireless networkshave been

deployed.

Product Features

• Provides speeds of 1Mbps, 2Mbps, 5.5Mbps and 11 Mbps

• Working range up to 1,311 ft. (400 meters) in an open environment

• Supports Ad-Hoc and Infrastructure modes for easy wireless

connection

• Uses Direct Sequence Spread Spectrum (DSSS) modulation

technology in the 2.4 GHz frequency range

• Maximum 15dBm output power

• Supports Win CE/Pocket PC 2002

• Supports RC4 128-bit WEP (Wired Equivalent Privacy) Encryption

• Compatible to IEEE 802.11b standard

• Power Save mode of 80mA

LED

LED stands for Light-Emitting Diode. The DCF-660W has one LED:

Link/Power - a solid Green light indicates proper installation and a

wireless connection. A flashing Green light indicates proper installation,

but no link established.

Link/Power

Wireless Basics

D-Link Air wireless products are based on industry standards to provide

easy-to-use and compatible high-speed wireless connectivity within your

home, business or public access wireless networks. Strictly adhering to the

IEEE standard, the D-Link Air wireless family of products will allow you to

access the data you want, when and where you want it. You will be able to

enjoy the freedom that wireless networking delivers.

Under many circumstances, it may be desirable for mobile network devices

to link to a conventional Ethernet LAN in order to use servers, printers or an

Internet connection supplied through the wired LAN. A Wireless Access

Point (AP) is a device used to provide this link.

Wireless Basics

Installation Flexibility

The D-Link Air DCF-660W offers a fast, reliable, cost-effective wireless

solution for client access to the network in a wide variety of scenarios and

applications:

1. Remote access to corporate network information

E-mail, file transfer and terminal emulation

2. In difficult-to-wire environments

Such as historical or old buildings, asbestos installations, and open

areas where wiring is difficult to deploy

3. In frequently changing environments

Retail, manufacturing and other workplaces that undergo frequent

changes of worker locations

4. Temporary LANs for special projects or peak time

At trade shows, exhibitions and construction sites that may require a

temporary network; retailers, airlines or shipping companies that need

additional workstations during peak periods; or auditors that may set up

workgroups at customer sites

5. Access to databases for mobile workers

Hospital clinical staffs or retailers that may require access to their

databases while maintaining mobility throughout a building or campus

6. For Small Office and Home Office users

Users who need an easy and quick installation of a small computer

network

7. Secure communication

For those companies or organizations that require a measure of

security to transmit information or communicate.

Other D-Link Air Wireless LAN products include:

 2.4GHz Wireless Cardbus Adapters used with laptop computers

(DWL-650)

 2.4GHz Wireless PCI cards used with desktop computers (DWL-520)

 2.4GHz Wireless Access Points (DWL-1000AP)

 2.4GHz Wireless Routers (DI-714 and DI-713P)

Wireless Basics

Installation Considerations

Designed to go up to 1,311 feet (approximately 400 meters), the D-Link Air

DCF-660W lets you access your network from virtually anywhere. Keep in

mind, however, that the number, thickness and location of walls, ceilings or

other objects that the wireless signals must pass thru may limit range.

Typical ranges vary depending on the types of materials and background RF

(radio frequency) noise in your home or business. The key to maximizing

range is to follow these basic principles:

1. Keep the number of walls and ceilings between the wireless Access

Point and your receiving device (i.e., the DCF-660W) to a minimum -

Each wall or ceiling can reduce your D-Link Air Wireless product’s range

from 3-90 feet (1-30 meters.) Position your Access Points, Residential

Gateways, and computers so that the number of walls or ceilings is

minimized.

2. Be aware of the direct line between Access Points, Residential

Gateways, and computers. A wall that is 1.5 feet thick (.5 meters), at a

45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-

degree angle it looks over 42 feet (14 meters) thick! Try to position the

Access Points and adapters so that the signal will travel straight through

a wall or ceiling for better reception.

3. Building Materials make a difference - A solid metal door or aluminum

studs may have a negative effect on range. Try to position Access Points,

and computers with wireless adapters so that the signal passes through

drywall or open doorways and not other materials.

4. Make sure that the device’s antenna is positioned for best reception by

using the software signal strength tools included with your product.

5. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical

devices or appliances that may generate extreme RF noise.

For the average home, range should not be a problem. If you experience

low or no signal strength in areas of your home that you wish to access,

consider positioning the Access Point in a location directly between the

computers with wireless adapters. Additional Access Points can be

connected to provide better coverage in rooms where the signal does not

appear as strong as desired.

Getting Started

Right out of the box, with its default settings, the DCF-660W will

automatically connect with other D-Link Air products.

On the following pages we will show you an example of two modes of

networking:

Infrastructure – using an Access Point, such as the DWL-

1000AP

Ad-Hoc – directly connecting to another computer, in a peer-to-

peer mode, using a wireless network adapter, such as the DWL-

650 in a laptop computer and the DCF-660W in a PDA.

An Infrastructure network contains an Access Point. The Infrastructure

Network example shown on the following page contains the following D-Link

network devices:

A wireless DHCP Router/Access Point/Print Server - D-Link Air DI-713P

A laptop computer with a wireless network adapter - D-Link Air DWL-650

A desktop computer with an Ethernet adapter - D-Link DFE-530TX+

A desktop computer with a wireless network adapter- D-Link Air DWL-520

A Cable modem - D-Link DCM-200

A PDA with a wireless compact flash adapter - D-Link Air DCF-660W

DHCP stands for Dynamic Host Configuration Protocol.

It is a protocol for assigning dynamic IP addresses “automatically.”

With a DHCP-capable gateway/router, there is no need

to manually assign an IP address.

Please refer to the following sections of this manual for additional information

about setting up a network:

Networking Basics- learn how to check your IP Address; share printers and

files.

Using the Configuration Utility- learn the settings you must use on each

computer in your network for successful communication.

Troubleshooting – learn how to check for the proper installation of the

network adapters’ drivers and other tips for troubleshooting the network.

Getting Started

Setting Up an Infrastructure Network

Please remember that D-Link Air wireless devices are pre-configured to connect

together, right out of the box, with the default settings.

You will need a broadband Internet access (Cable/DSL)

subscription.

Consult with your Cable/DSL provider for proper installation of the

modem.

Connect the modem to a wireless Broadband router (such as the D-

Link Air DI-713P.) See the installation instructions included with the

router.

Install the drivers for the wireless network adapter (such as the D-

Link Air DWL-650) into the laptop computer. See the Quic

Installation Guide included with the DWL-650.

If an Ethernet port is available on the router, connect a computer

that is equipped with an Ethernet Network adapter (such as the

DFE-530TX+

)

to the router.

If you have a desktop computer in your network, install the drivers

for the D-Link Air DWL-520 wireless network adapter. See the

Quick Installation Guide included with the DWL-520.

Install the D-Link Air DCF-660W into your PDA. See the Quic

Installation Guide included with the DCF-660W. In all the above

installations, the LEDs will light ON to show connection.

Getting Started

Setting up a Wireless Ad Hoc Network

Install a network adapter into one computer. In the example

above, a D-Link Air DWL-120 USB Wireless Network adapter is

installed. A DWL-520 Wireless PCI Adapter could also be

installed in a desktop computer. See the Quick Installation Guid

included with the product for installation instructions.

Install a wireless cardbus adapter (such as the DWL-650) into a

laptop computer. See the Quick Installation Guide included with the

network adapter. Set the wireless configuration for the adapters to

Ad-Hoc mode, set the adapters to the same channel, and assign

an IP Address to each computer on the Ad-Hoc network. (See

box below.)

Install and configure the DCF-660W. See the Quick Installation

Guide included with the product.

IP Address

When assigning IP Addresses to the computers on the network, please

remember that the IP Address for each computer must be in the same IP

Address range as all the computers in the network, and the subnet mask

must be exactly the same for all the computers in the network.

For example: If the first computer is assigned an IP Address of 192.168.0.2

with a Subnet Mask of 255.255.255.0, then the second computer can be

assigned an IP Address of 192.168.0.3 with a Subnet Mask of 255.255.255.0,

etc.

IMPORTANT: If computers or other devices are assigned the same IP

Address, one or more of the devices may not be visible on the network.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere D-Link Adapter Handbücher

D-Link

D-Link DWA-182 Bedienungsanleitung

D-Link

D-Link DUB-E100 Bedienungsanleitung

D-Link

D-Link DWA-548 Bedienungsanleitung

D-Link

D-Link DVG-2001S Bedienungsanleitung

D-Link

D-Link PCMCIA WIRELESS ASAPTER DWL-650 Bedienungsanleitung

D-Link

D-Link AirPlus XTREME G DWL-G132 Bedienungsanleitung

D-Link

D-Link DUB-E100 Bedienungsanleitung

D-Link

D-Link DWL-500 - 11Mb Wireless LAN PCI Network Card Bedienungsanleitung

D-Link

D-Link DFE-538TX Bedienungsanleitung

D-Link

D-Link DVG-5121SP Bedienungsanleitung

D-Link

D-Link DPE-101GI Bedienungsanleitung

D-Link

D-Link WA181A1 Bedienungsanleitung

D-Link

D-Link DCF-650W - Air Wireless CompactFlash Cf 802.11B... Bedienungsanleitung

D-Link

D-Link DHP-P306AV Bedienungsanleitung

D-Link

D-Link PCMCIA WIRELESS ASAPTER DWL-650 Bedienungsanleitung

D-Link

D-Link DWA-542 Bedienungsanleitung

D-Link

D-Link Air Xpert DWL-AG650 Bedienungsanleitung

D-Link

D-Link DWA-182 Bedienungsanleitung

D-Link

D-Link DWA-110 Bedienungsanleitung

D-Link

D-Link DWL-G630 - AirPlus G 802.11g Wireless PC... Bedienungsanleitung

D-Link

D-Link DFE-690TXD Bedienungsanleitung

D-Link

D-Link DHP-501AV Bedienungsanleitung

D-Link

D-Link D DPH-50U DPH-50U Betriebshandbuch

D-Link

D-Link PersonalAir DBT-120 Bedienungsanleitung

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Bedienungsanleitung

RCA

RCA AH57R Bedienungsanleitung