D-Link 2Voice + 4SW VoIP Router DVG-1402S Bedienungsanleitung

their respective holders. Software and specifications subject to change without notice. DVG-1402S VoIP

Router

•DVG-1402S VoIP Router

•Ethernet Cable

(CAT5 UTP Straight-Through)

•12V, 1.2A

Power Adapter

Before You Begin

1. If you purchased this Router to share your high-speed Internet connection with other

computers, you must have an established Internet account from an Internet Service

Provider (ISP).

2. It’s best to use the same computer that is connected to your router for configuring the

DVG-1402S VoIP Router. The DVG-1402S acts as a DHCP server and will assign all

the necessary IP address information on your network. See theQuick Installation Guide

or the Manual on the CD-ROM for setting each network adapter to automatically obtain an

IP address.

Check Your Package Contents

If any of the above items is missing, please contact your reseller.

This product can be set up using

any current web browser, i.e.,

Internet Explorer 6 or Netscape

Navigator 6.2.3. DVG-1402S

oIP Route

Using a power adapter with

a different voltage rating will

damage and void the

warranty

or this product.

•CD-ROM

containing Manual and Warranty

Connecting the Router to your Computer

A. First, connect the power adapter to the power input at the back

panel of the DVG-1402S and then plug the other end of the

power adapter to a wall outlet or power strip. On the front of the

device, the Power LED will turn ON to indicate proper operation.

B. Insert one end of the Ethernet cable into an Ethernet (LAN) port

on the back panel of the DVG-1402S and the other end of the

cable to an Ethernet Adapter or available Ethernet port on your

computer.

C. Insert the telephone cable included with the Router into the

ADSL port, then connect the cable to your telephone line.

D. Check the LED display on the front of the Router to confirm that

the connections have been made.

Power

Input

Connect to

AC Adapter

Reset

Push to return to

factory settings

LAN Ports

Connect to the

LAN and other

computers

Phone Connections

Connect to your phones

using standard phone

cabling

WAN Port

Connect to the

WAN (Internet)

Configure IP Settings

Use the following steps to configure a computer running Windows XP to

be a DHCP client.

1. From the Start menu on your desktop, go to My Network Places.

2. Under Network Tasks, click View Network Connections.

To connect to the network, make sure the network adapter in

your computer is configured properly. Here’s how to configure

the network adapter to obtain an IP address automatically for

the DVG-1402S VoIP Router.

Click on My Network Places.

3. Right-click on the Local Area Connection icon and select

Properties from the pull-down menu.

4. In the General tab of the Local Area Connection Properties

menu, highlight Internet Protocol (TCP/IP) under “This

connection uses the following items:” by clicking on it once. Click

on the Properties button.

Select the Properties option from the pull-

down menu.

Click on View Network

Connections.

5. Select “Obtain an IP address automatically” by clicking once in

the circle. Click the OK button.

Your computer is now ready to use the Router’s DHCP server.

Connecting Additional Computers

to the DVG-1402S

oIP Router

Select Obtain an IP

address automatically

in the Internet Protocol

(TCP/IP) Properties

window.

Click on Internet

Protocol (TCP/IP).

Click on Properties.

Using additional Ethernet (CAT5 UTP) cables, connect your Ethernet-

equipped computers to the LAN ports on the back panel of the DVG-

1402S. When you have completed the steps in this Quick Installation

Guide,your connected network should look similar to this:

Initial Web Configuration

The Login dialog box appears:

Open your Web

browser and type

“http://192.168.15.1”

into the URL address

box. ThenpresstheEnter

orReturn key.

TheLogin page appears.

The Home window appears:

Click on Run Wizard.

Enter “admin” for the

User name and

Password and click

OK.

Configuring the WAN (Internet)

Connection

The Wizard will guide you through the 5 steps for setting up your

preferred Internet connection. Click the Next button to continue.

Step 1:

Select a time zone from the pull-down menu and click next.

Click the Next button.

Selecta

time zone.

Step 2:

Enter a new password for the DVG-1402S in the Password field.

Confirm the new password by entering it again into the Verify Password

field. Click the Next button to continue.

Step 3:

Use the radio button to select your preferred Internet connection type.

Then click Next to continue.

Click the Next button.

Set thePassword

andthenverify it.

Select the Connection T

The following are three typical WAN connection examples for Dynamic

IP Address (DHCP), Static IP Address,and PPPoE connection types.

Step 4.1:

Select Dynamic IP Address if your ISP automatically assigns you an IP

address. This is the most common way of connecting the DVG-1402S to

another modem, such as a Cable modem.

Enter the host name, if required, in the Host Name field. If you are using

a Cable modem to make the connection to your ISP’s WAN (Internet),

click the Clone MAC Address button. This will copy the MAC address of

your PC’s network adapter to the DVG-G1402S. The Cable modem will

then recognize the DVG-G1402S and make a valid connection. Click the

Next button to continue.

Andere Handbücher für 2Voice + 4SW VoIP Router DVG-1402S

Inhaltsverzeichnis

Andere D-Link Netzwerk-Router Handbücher

D-Link

D-Link DSL-2740U Bedienungsanleitung

D-Link

D-Link DES-1228P - Web Smart Switch Bedienungsanleitung

D-Link

D-Link DSR-250 Bedienungsanleitung

D-Link

D-Link DAS-3626 Bedienungsanleitung

D-Link

D-Link DSL-G684T Bedienungsanleitung

D-Link

D-Link Air Premier DAP-2695 Bedienungsanleitung

D-Link

D-Link DSL-225 Bedienungsanleitung

D-Link

D-Link DSL-3580L Series Bedienungsanleitung

D-Link

D-Link AirPlus DWL-G730AP Bedienungsanleitung

D-Link

D-Link AirPlus DWL-810 Bedienungsanleitung

D-Link

D-Link DSS-8+ Bedienungsanleitung

D-Link

D-Link DSR-250 Bedienungsanleitung

D-Link

D-Link Express Ethernetwork DI-704P Bedienungsanleitung

D-Link

D-Link DIR-815/AC Bedienungsanleitung

D-Link

D-Link DIR-330 - Wireless G VPN Router Bedienungsanleitung

D-Link

D-Link DGS-1016D - Switch Bedienungsanleitung

D-Link

D-Link DWR-953 Bedienungsanleitung

D-Link

D-Link DIR-1950 Bedienungsanleitung

D-Link

D-Link DIR-605 Bedienungsanleitung

D-Link

D-Link DSL-G2562DG Bedienungsanleitung

D-Link

D-Link DSR-250N Bedienungsanleitung

D-Link

D-Link DWR-M921 Bedienungsanleitung

D-Link

D-Link DIR-803 Bedienungsanleitung

D-Link

D-Link DWP-1010KT Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung