D-Link DI-804HV - Express ENwork Router Bedienungsanleitung

DI-804HV with Windows 2000/XP IPsec VPN

Client Configuration Guide

This guide will show how to configure a Windows 2000/XP machine to make an IPsec VPN

Tunnel connection to a DI-804HV. Below is the example network that this document is based

on.

Technical Requirement: Customer is required to understand their network and Windows

2000/XP well for this configuration. Please consult a Microsoft certified professional if unsure.

The information provided here is for your reference only. D-Link will not be held responsible for

any consequences arise from it.

Windows 2000

Professional

Workstation

VPN Client

DI-804HV

LAN: 192.168.0.0/24

DSL-

300G+

Internet

WAN IP: 10.0.0.1 IP: 10.0.0.2

DI-804HV with Windows 2000/XP IPsec VPN Client Configuration Guide Page 2

DI-804HV Configuration

1. Type in the IP address of

the DI-804HV in the

address bar of the browser.

Log-in using the default

username and password.

2. Click on VPN on the left-

hand side menu. Make

sure that VPN is checked

and enter 5 for maximum

number of tunnels. Click

on ‘Apply’ and then

‘Restart’ to save the

settings. Log-in again and

then Click on HomeÆVPNÆ

‘Dynamic VPN Settings’.

3. Enter the following details

for the Dynamic VPN

connection. Enter the

Tunnel name (client).

Enter the Local

Subnet/Netmask

(192.168.0.0/255.255.255.

0). Enter the pre-share

key. Click on ‘Apply’ and

then ‘Restart’ to save the

settings. Log-in again and

come back to this screen.

Now click on ‘Select IKE

Proposal’.

DI-804HV with Windows 2000/XP IPsec VPN Client Configuration Guide Page 3

4. Under ID #1, enter the

name ‘3DES-MD5’, DH-

Group = Group2, Encrypt

algorithm = 3DES, Auth

algorithm = MD5, Life Time

= 28800, Life Time Unit =

Sec. Set the Proposal ID at

the bottom to #1 and then

click on the ‘Add to’ button.

Click on ‘Apply’ and then

‘Restart’.

5. Click on HomeÆVPNÆ

Click on ‘Dynamic VPN

Settings’ ÆClick on ‘Select

IPsec Proposal’. Under ID

#1, enter the Proposal

Name = 3DES-MD5, DH-

Group = Group2, Encap

Protocol = ESP, Encrypt

algorithm = 3DES, Auth

algorithm = MD5, Life Time

= 3600, Life Time Unit =

Sec. Set the Proposal ID at

the bottom to #1 and then

click on the ‘Add to’ button.

Click on ‘Apply’ and then

‘Restart’.

DI-804HV with Windows 2000/XP IPsec VPN Client Configuration Guide Page 4

Windows 2000/XP Configuration

1. Go into StartÆRunÆand

the type in MMC to bring

up the Console.

2. Click on ConsoleÆand

then Click on Add/Remove

Snap In. In Windows XP,

click on FileÆAdd/Remove

Snap-in.

3. Click on the ‘Add’ Button.

4. Select ‘IP Security Policy

Management’ and then

Click on ‘Add’.

DI-804HV with Windows 2000/XP IPsec VPN Client Configuration Guide Page 5

5. Select ‘Local computer’ and

then click on Finish.

6. Click on ‘Close’ on the Add

Standalone Snap-in

window.

7. Click on OK in the

‘Add/Remove Snap-in’.

DI-804HV with Windows 2000/XP IPsec VPN Client Configuration Guide Page 6

8. Right-Click on IP Security

Policies on Local Machine.

Select ‘Create IP Security

Policy’.

9. The wizard should then

come up. Click ‘Next’ to

continue.

10.Enter the name for the

Policy as well as the

description. Click ‘Next’.

DI-804HV with Windows 2000/XP IPsec VPN Client Configuration Guide Page 7

11.Uncheck ‘Activate the

default response rule’.

Click ‘Next’.

12.Click on ‘Finish’.

13.The Properties window for

the newly created policy

should then come up.

Click on ‘Add’.

DI-804HV with Windows 2000/XP IPsec VPN Client Configuration Guide Page 8

14.Click on ‘Add’ under IP

Filter List.

15.Enter the name and the

description for the New IP

Filter List. Uncheck the

‘Use Add Wizard’. Click on

‘Add’.

16.Select ‘A specific IP subnet’

for the ‘Source address’

and enter the Internal LAN

range on the DI-804HV

side. Select ‘My IP

Address’ for the

‘Destination address’.

Uncheck the ‘Mirrored….’

Option at the bottom of

the screen. Click ‘OK’.

DI-804HV with Windows 2000/XP IPsec VPN Client Configuration Guide Page 9

17.Click ‘Close’.

18.Select the newly created IP

Filter.

19.Click on the ‘Filter Action’

Tab. Select ‘Require

Security’. Click on ‘Edit’.

DI-804HV with Windows 2000/XP IPsec VPN Client Configuration Guide Page 10

20.Move the 3DES/MD5

security method to the top.

Check the ‘Session key

Perfect Forward Secrecy’.

Click ‘OK’.

21.Click on ‘Connection Type’

Tab. Select ‘All network

connections’.

22.Click on ‘Tunnel Setting’

Tab. Specify the tunnel

endpoint as the W2K

Pro/XP client IP address

(10.0.0.2 in this example).

Andere Handbücher für DI-804HV - Express ENwork Router

Inhaltsverzeichnis

Andere D-Link Netzwerk-Router Handbücher

D-Link

D-Link DSL-2540T Bedienungsanleitung

D-Link

D-Link DES-1316 - Switch Bedienungsanleitung

D-Link

D-Link DSL-2650U Bedienungsanleitung

D-Link

D-Link des-1016a Bedienungsanleitung

D-Link

D-Link DSL-2640B Bedienungsanleitung

D-Link

D-Link DWR-932M Bedienungsanleitung

D-Link

D-Link DWR-953 Bedienungsanleitung

D-Link

D-Link DSL-500 Bedienungsanleitung

D-Link

D-Link SharePort DIR-825 Bedienungsanleitung

D-Link

D-Link DIR-505 Bedienungsanleitung

D-Link

D-Link DSL-226 Bedienungsanleitung

D-Link

D-Link DES-1005D Bedienungsanleitung

D-Link

D-Link DSL-2640R Bedienungsanleitung

D-Link

D-Link DIR-615 - Wireless N Router Bedienungsanleitung

D-Link

D-Link DIR-615 - Wireless N Router Bedienungsanleitung

D-Link

D-Link DIR-890L Bedienungsanleitung

D-Link

D-Link DSL-2750U Bedienungsanleitung

D-Link

D-Link DIR-508L Bedienungsanleitung

D-Link

D-Link DIR-806A Bedienungsanleitung

D-Link

D-Link Express Ethernetwork DI-704P Bedienungsanleitung

D-Link

D-Link DSL-2740B Bedienungsanleitung

D-Link

D-Link DIR-300S Bedienungsanleitung

D-Link

D-Link DGS-1016D - Switch Bedienungsanleitung

D-Link

D-Link DSL-2540U Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise