D-Link DIR-300NRU Bedienungsanleitung

Quick Installation Guide

DIR-300NRU

Wireless Router with Built-in 4-port Switch

DIR-300NRU Quick Installation Guide

BEFORE YOU BEGIN

Delivery Package

•Wireless router DIR-300NRU

•Power adapter

•Straight-through Ethernet cable ( AT 5E)

•D-ROM with “User Manual” and “Quick Installation Guide”

•“Quick Installation Guide” (brochure)

If any of the items are missing, please contact your reseller.

!Using a power supply with a different voltage rating than the one

included will cause damage and void the warranty for this product.

Default Settings

IP address of ireless router 192.168.0.1

Username (login) admin

Pass ord admin

Name of ireless net ork (SSID) DIR-300NRU

System Requirements and Equipment

•A computer with any operating system that supports a web browser.

•A web browser to access the web-based interface of the router: Windows

Internet Explorer, Mozilla Firefox, or Opera.

•A NI (Ethernet or Wi-Fi adapter) to connect to the router.

•An 802.11b, g, or n Wi-Fi adapter to create a wireless network.

DIR-300NRU Quick Installation Guide

CONNECTING TO PC (OS WINDOWS XP)

PC with Ethernet Adapter

1. Make sure that your P is powered off.

2. onnect an Ethernet cable between any of LAN ports located on the back

panel of the router and the Ethernet port of your P .

3. onnect the power cord to the power connector port on the back panel of

the router, then plug the power adapter into an electrical outlet or power

strip.

4. Turn on your P and wait until your operating system is completely

loaded.

Now you should configure your P to obtain an IP address automatically (as

DH P client).

1. lick the Start button and proceed to the Control Panel > Net ork

and Internet Connections > Net ork Connections window.

2. In the Net ork Connections window, right-click the relevant Local

Area Connection icon and select the Properties line in the menu

displayed.

DIR-300NRU Quick Installation Guide

3. In the Local Area Connection Properties window, on the General

tab, in the This connection uses the follo ing items section, select

the Internet Protocol (TCP/IP) line. lick the Properties button.

4. Select the Obtain an IP address automatically radio button. lick

the OK button.

lick the ОК button. Now your computer is configured to obtain an IP address

automatically.

PC with Wi- i Adapter

1. onnect the power cord to the power connector port on the back panel of

the router, then plug the power adapter into an electrical outlet or power

strip.

2. Turn on your P and wait until your operating system is completely

loaded.

DIR-300NRU Quick Installation Guide

3. Turn on your Wi-Fi adapter. As a rule, modern notebooks with built-in

wireless NI s are equipped with a button or switch that turns on/off the

wireless adapter (refer to your P documents). If your P is equipped

with a pluggable wireless NI , install the software provided with your

Wi-Fi adapter.

Now you should configure your Wi-Fi adapter.

1. lick the Start button and proceed to the Control Panel > Net ork

and Internet Connections > Net ork Connections window.

2. Select the icon of the wireless connection and make sure that your Wi-Fi

adapter is on.

3. Search for available wireless networks.

4. In the opened Wireless Net ork Connection window, select the

needed wireless network (DIR-300NRU) and click the Connect button.

After that the Wireless Net ork Connection Status window appears.

DIR-300NRU Quick Installation Guide

CONFIGURING ROUTER

Connecting to Web-based Interface

1. Start a web browser.

2. In the address bar of the web browser, enter the IP address of the router

(by default, the following IP address is specified: 192.168.0.1). Press

the Enter key.

3. On the opened page, enter the username (login) and password for the

administrator account (by default, the following username and password

are specified: admin, admin). Then click the Enter button.

If the error “ The page cannot be displayed ” (or “ Unable to display the

page ”/“ Could not connect to remote server ”) occurs upon connecting to

the web-based interface of the router, make sure that you have properly

connected the router to your computer.

DIR-300NRU Quick Installation Guide

Right after the first access to the web-based interface you are forwarded to the

page for changing the administrator password specified by default.

Enter the new password in the Pass ord and Confirmation fields. Then

click the Save button.

Remember or write down the new password for the administrator

account. In case of losing the new password, you can access the settings

of the router only after restoring the factory default settings via the

hardware Reset button. This procedure wipes out all settings that you

have configured for your router.

After successful registration the system statistics page opens. The page

displays general information on the router and its software.

The web-based interface of the router is multilingual. Select a needed language

from the menu displayed when the mouse pointer is over the Language

caption. You can change the language of the web-based interface in any menu

item.

DIR-300NRU Quick Installation Guide

Configuring Connection to the Internet

You should configure your WAN connection in accordance with data

provided by your Internet service provider (ISP). Make sure that you

have obtained all necessary information prior to configuring your

connection. Otherwise contact your ISP.

PPPoE or IPoE WAN Connection

1. Go to the Net / Connections page and select the WAN connection.

2. In the General settings section, select a needed value from the

Connection Type drop-down list.

3. In the Physical layer section, select the value corresponding to the

INTERNET port of the router (Ports:5) from the Physical interface

drop-down list.

4. If your ISP uses MA address binding, enter the address registered by

your ISP upon concluding the agreement in the MAC field.

5. For Static IP connection (IPoE): fill in the IP Address, Netmask,

Gate ay IP Address, and Primary DNS server fields.

6. For Dynamic IP connection (IPoE): select the Obtain an IP address

automatically and Obtain DNS server addresses automatically

checkboxes.

7. For PPPoE connection: enter authorization data provided by your ISP

(the username (login) in the PPP Username field and the password in

the Pass ord and Pass ord confirmation fields), or select the

Without authorization checkbox if authorization is not required.

8. If needed, fill in other fields on the page in accordance with data provided

by the ISP.

9. lick the Save button.

DIR-300NRU Quick Installation Guide

PPTP or L2TP WAN Connection

1. Go to the Net / Connections page and select the WAN connection.

2. In the General settings section, select the IPoE value from the

Connection Type drop-down list.

3. In the Physical layer section, select the value corresponding to the

INTERNET port of the router (Ports:5) from the Physical interface

drop-down list.

4. If your ISP uses MA address binding, enter the address registered by

your ISP upon concluding the agreement in the MAC field.

5. For Static IP connection: fill in the IP Address, Netmask, Gate ay

IP Address, and Primary DNS server fields.

6. For Dynamic IP connection: select the Obtain an IP address

automatically and Obtain DNS server addresses automatically

checkboxes.

7. lick the Save button.

8. On the Net / Connections page, click the Add button.

9. In the General settings section, specify a name for your connection

(any name for easier identification) in the Name field and select a needed

value (PPTP or L2TP) from the Connection Type drop-down list.

10. In the Physical layer section, select the WAN value from the Physical

interface drop-down list.

11. Fill in other fields on the page in accordance with data provided by the

ISP.

12. lick the Save button.

13. On the Net / Connections page, select the choice of the Default

gate ay radio button corresponding to the new PPTP or L2TP WAN

connection.

DIR-300NRU Quick Installation Guide

Example of Connection via VLANs

If your ISP provides:

•access to the Internet via the VLAN with the tag (VLAN ID) 2, the

PPPoE connection type, the login user, and the password

user_password,

•access to IPTV service via the VLAN with the tag (VLAN ID) 10,

and your set-top box is connected to the LAN port 2, then follow the next steps

to configure the router.

1. Go to the Net / Connections page, select the WAN connection and

click the Delete button on the opened page.

2. Go to the Advanced / VLAN page.

3. Select the lan group.

4. Select the line port 2 in the table at the bottom of the page and click the

Delete port button.

5. lick the Save changes button.

6. Select the an group.

7. In the Name filed, enter a name for the group (INTERNET).

8. From the Type drop-down list, select the NAT value.

9. From the Port drop-down list, select the value port 5 (corresponds to the

INTERNET port of the router).

10. From the Tag drop-down list, select the tagged value.

11. In the VLAN ID field, enter 2.

12. lick the Save changes button.

You have created the group of ports for connection to the Internet.

13. lick the Add button.

14. In the Name field, enter a name for the new group (IPTV).

15. From the Type drop-down list, select the Transparent value.

16. From the Port drop-down list, select the value port 2.

Andere Handbücher für DIR-300NRU

Inhaltsverzeichnis

Andere D-Link Netzwerk-Router Handbücher

D-Link

D-Link DSL-524T Bedienungsanleitung

D-Link

D-Link NetDefend DFL-1600 Bedienungsanleitung

D-Link

D-Link AirPlus G DWL-G710 Betriebsanleitung

D-Link

D-Link DI-704 Bedienungsanleitung

D-Link

D-Link DWR-926 Bedienungsanleitung

D-Link

D-Link IR850LA1 Bedienungsanleitung

D-Link

D-Link Express EtherNetwork DI-604 Bedienungsanleitung

D-Link

D-Link DIR-855L Bedienungsanleitung

D-Link

D-Link DSL-3580L Series Bedienungsanleitung

D-Link

D-Link DSR-250 Bedienungsanleitung

D-Link

D-Link DSL-500 Installationshandbuch

D-Link

D-Link DVG-7062S Bedienungsanleitung

D-Link

D-Link DES-3528 - xStack Switch - Stackable Handbuch

D-Link

D-Link xStack DGS-3600 Series Handbuch

D-Link

D-Link DWR Series Bedienungsanleitung

D-Link

D-Link DSL-2750E Bedienungsanleitung

D-Link

D-Link AC750 Bedienungsanleitung

D-Link

D-Link DIR-827 Bedienungsanleitung

D-Link

D-Link DIR-608 Bedienungsanleitung

D-Link

D-Link DIS-300G Series Bedienungsanleitung

D-Link

D-Link DIR-857 Bedienungsanleitung

D-Link

D-Link DSL-G225 Bedienungsanleitung

D-Link

D-Link DIR-140L Bedienungsanleitung

D-Link

D-Link DGL-4300 - GamerLounge Wireless 108G Gaming... Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise