D-Link DIR-850L Bedienungsanleitung

www.dlinkmea.com

DIR-850L

Wireless AC1200 Dual Band

Gigabit Router

User

Manual

www.dlinkmea.com

USER MANUAL: DIR-850L

Wireless AC1200 Dual Band Gigabit Router

SYSTEM REQUIREMENTS

Network Requirements •An Ethernet-based Cable

•IEEE 802.11ac, 802.11a, 802.11n or 802.11g wireless clients

•10/100/1000 Ethernet

Web-based Configuration

Utility Requirements

Computer with the following:

•Windows®, Macintosh, or Linux-based operating system

•An installed Ethernet adapter

Browser Requirements:

•Internet Explorer 7 or higher

•Firefox 3.5 or higher

•Safari 4 or higher

•Chrome 8 or higher

Windows®Users:

Make sure you have the latest version of Java installed.

Visit www.java.com to download the latest version.

HARDWARE OVERVIEW CONNECTIONS

www.dlinkmea.com

1USB Port Connect a USB flash drive to share content throughout your network.

2WPS Button Press to start the WPS process. The Internet LED will start to blink.

3LAN Ports (1-4) Connect 10/100/1000 Ethernet devices such as computers, switches, storage (NAS) devices and game consoles

4Internet Port Using an Ethernet cable, connect your ONT to this port.

5Power Button Press the power button to power on and off.

6Power Receptor Receptor for the supplied power adapter.

7Reset Button Insert a paperclip in the hole and wait for several seconds to reset the router to default settings.

HARDWARE OVERVIEW LEDS

1Power LED A solid green light indicates a proper connection to the power supply. The light will blink green during the WPS

process. The light will blink orange during boot up.

2Internet LED A solid light indicates connection on the Internet port. If the LED is orange, the connection is good but the router

cannot connect to the Internet.

www.dlinkmea.com

FIRST TIME LOGIN

When you log in to the DSL Router for the first time, the login wizard appears.

Open a Web browser on your computer.

Enter http://192.168.1.1 (DSL router default IP address) in the address bar. The login page appears.

Enter a user name and the password. The default user name is admin and the password is printed on the device label located

at the bottom of the casing.

Click Enter to log in.

D-LINK QUICK SETUP WIZARD

Select Basic settings to run the Setup Wizard

Please wait while your router detects your Internet connection type. If the router detects your Internet connection, you may need to enter your

ISP information such as user name and password. If the router detected or you selected PPPoE, enter your PPPoE user name and password

provided by ISP and

www.dlinkmea.com

Click Next to continue

For both the 2.4GHz and 5GHz segments, create a Wi-Fi network name (SSID) using up to 32 characters.

Create a Wi-Fi password (between 8-63 characters). Your wireless clients will need to have this pass phrase or key entered to be able to con-

nect to your wireless network

The router will reboot once the settings are saved. Please wait till it comes up.

www.dlinkmea.com

WEB-BASED CONFIGURATION UTILITY

To access the configuration utility, open a web-browser such as Internet Explorer and enter the IP address of the router (http://192.168.1.1) in

the address bar.

Enter your User name and Password

INTERNET CONNECTION SETUP

Configure the PPPOE interface

To configure the PPPoE connection go to: TCP/IP Settings >> WAN Interface

PPP User name:Type the user name provided by the ISP

PPP Password:Type the password provided by the ISP

PPPoE Service Name:Optional (keep it blank)

www.dlinkmea.com

CHECK THE STATUS OF MANAGEMENT INTERFACE

To Check the status of Management interface: Go to Management >> Status >>WAN configuration

If connected, the management interface acquires a private IP address automatically from DHCP server.

CHECK THE STATUS OF PPPOE/INTERNET INTERFACE

To check the status of management interface go to: Management>>Status>>WAN configuration

If successfully authenticated the PPPOE WAN Interface will receive a public routable IP address.

The PPPOE WAN interface is the default gateway towards external world /Internet as depicted in the screenshot the Management Interface is

up but the PPPOE interface is connected.

www.dlinkmea.com

LAN CONNECTION SETUP

You can configure the LAN IP address according to the actual application. The preset IP address is 192.168.1.1. You can use the default settings

and DHCP service to manage the IP settings for the private network. The IP address of the device is the base address used for DHCP.

Choose: TCP/IP Settings >> LAN Interface. The Local Network page shown in the following figure appears.

WIRELESS CONNECTION SETUP

To Configure 5 GHz Wireless 802.11ac SSID

This function is used to modify the standard 802.11AC wireless 5GHz radio settings. It is recommended not to change the default settings,

because incorrect settings may impair the performance of your wireless radio. The default settings provide the best wireless radio performance

in most environments.

Choose: Wireless >> wlan1 (5GHz) >> Basic Settings. The page shown in the following figure appears

www.dlinkmea.com

Disable Wireless:Select this to turn Wi-Fi on and off.

Wireless Network Name (SSID):The Wireless Network Name is a unique name that identifies a network. All devices on a network must share

the same wireless network name in order to communicate on the network. If you decide to change the wireless network name from the default

setting, enter your new wireless network name in this field.

Channel Number:Select Auto

WIRELESS SECURITY

Choose: Wireless >> wlan1 (5GHz) >> Security:

In the Wireless Settings page, click Security Settings. The page shown in the following figure appears. Select the SSID that you want to

configure from the drop-down list.

Select the encryption type from the Security Mode drop-down list. You can select None, WEP, WPA, WPA2 and WPA-Mixed.

WPA-Mixed (WPA +WPA2):It’s recommended to select this encryption mode in order to ensure backward compatibility

with legacy WI-FI adaptor.

Pre-Shared key:this is the wireless password.

Click Apply Changes to save the settings.

www.dlinkmea.com

TO CONFIGURE 2.4 GHZ WIRELESS 802.11 B/G/N SSID

This function is used to modify the standard 802.11 b/g/n wireless 2.4 GHz radio settings. It is recommended not to change the default settings,

because incorrect settings may impair the performance of your wireless radio. The default settings provide the best wireless radio performance

in most environments.

Choose:Wireless >> wlan2 (2.4GHz) >> Basic Settings.

Disable Wireless:Select this to turn Wi-Fi on and off.

Wireless Network Name (SSID): The Wireless Network Name is a unique name that identifies a network. All devices on a network must share

the same wireless network name in order to communicate on the network. If you decide to change the wireless network name from the default

setting, enter your new wireless network name in this field.

Channel Number: Select Auto

Andere Handbücher für DIR-850L

Inhaltsverzeichnis

Andere D-Link Netzwerk-Router Handbücher

D-Link

D-Link DSL-2750E Handbuch

D-Link

D-Link DWR-933 Bedienungsanleitung

D-Link

D-Link DSL-500 Installationshandbuch

D-Link

D-Link DFL-900 Bedienungsanleitung

D-Link

D-Link DWR-710 Bedienungsanleitung

D-Link

D-Link AirPlus DWL-810+ Bedienungsanleitung

D-Link

D-Link SharePort DIR-825 Bedienungsanleitung

D-Link

D-Link DSL-X1852E Bedienungsanleitung

D-Link

D-Link DSL-2640BT Bedienungsanleitung

D-Link

D-Link Mini 3G 21 Mbps Bedienungsanleitung

D-Link

D-Link xStackTM DGS-3300 Bedienungsanleitung

D-Link

D-Link 790069450846 Bedienungsanleitung

D-Link

D-Link DIR-815 Bedienungsanleitung

D-Link

D-Link N300 Bedienungsanleitung

D-Link

D-Link DIR-330 - Wireless G VPN Router Bedienungsanleitung

D-Link

D-Link DVG-N5402GF Bedienungsanleitung

D-Link

D-Link DSL-2640U Bedienungsanleitung

D-Link

D-Link DSL-524B Bedienungsanleitung

D-Link

D-Link DWR Series Bedienungsanleitung

D-Link

D-Link DSL-2600U Bedienungsanleitung

D-Link

D-Link DSL-504T Bedienungsanleitung

D-Link

D-Link DES-3010F Bedienungsanleitung

D-Link

D-Link DRO-250i Bedienungsanleitung

D-Link

D-Link DIS-200G-12S Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise