D-Link DSL-502T Bedienungsanleitung
Before You Begin
1. If you purchased this Router to share your high-speed Internet connection with other
computers, you must have an established Internet account from an Internet Service Provider
(ISP).
This product can be set upusing
any current web browser, i.e.,
InternetExplorer6orNetscape
Navigator 6.2.3. DSL-502T
A
DSL Modem Route
r
2. It is best to use the same computer that is connected to your ISP for configuring the DSL-
502T ADSL Modem Router. The DSL-502T acts as a DHCP server and will assign all the
necessary IP address information on your network. See the Appendix for setting each
network adapter to automatically obtain an IP address.
©2006 D-Link Australi
respecti
a Pty Ltd. All rights reserved. Trademarks or registered trademarks are the property of their
ve holders. Software and specifications subject to change without notice.
DSL-502T ADSL Modem Router.
Check Your Package Contents
DSL-502T
ADSL Modem Route
r
CD-ROM with Click’n Connect Utility,
P
r
oduct Documentation and USB Drivers
USB Cable
Telephone Cable (RJ-11)
CAT 5 UTP Ethernet Cable (RJ-45)
Using a power adapter with
a different voltage rating will
damage and void the
warranty for this product.
9V 1A
Power Ada
p
te
r
If any of the above items are missing, please contact your reseller.
Configuring the Router via the D-Link
Click’n Connect Utility
Insert the CD-ROM into your PCs CD Drive. The Click’n Connect utility should
appear automatically. If it does not appear, explore your CD-ROM drive within
Windows, and double-click on the file “dslutility.exe” to start the utility manually.
It is extremely important that you DO NOT connect any cables to the DSL-
502T prior to completing the Click’n Connect Utility.
You can select one of five options:
1. User Manual: This option will open up the DSL-502T user manual. You
will need Adobe Acrobat Reader installed to view the manual.
2. Quick Install Guide: This option will show you a software-based version
of this Quick Install Guide
3. Install Acrobat Reader: Selecting this option will install Adobe Acrobat
Reader onto your PC.
4. Technical Support: Selecting this option will link you to D-Link
Australia/New Zealand Technical Support online.
5. Start Installation: This will commence the installation of the DSL-502T.
2
Configuring the Router via the D-Link
Click’n Connect Utility
The Click’n Connect utility will guide you through the installation process step-by-
step. Follow the on-screen instructions, then proceed to the next step.
Step 1 - Power Up the Device
Follow the on-
screen
instructions,
then Click
Next to
continue
Connect the Power Adapter from the wall socket to the DSL-502T. Wait for the
Status LED to blink before proceeding onto the next step.
3
Configuring the Router via the D-Link
Click’n Connect Utility
The Click’n Connect utility will guide you through the installation process step-by-
step. Follow the on-screen instructions, then proceed to the next step.
Step 2 – Select Your Connection Type
elect the connection type that you would like to use to connect the DSL-502T to
02T
Install USB Drivers if USB connection re
q
uired
Click Next to
continue
Select your
Connection Type
S
your PC. You can select Ethernet, which uses a network cable to connect it to
your PC, or you can select USB to connect the DSL-502T with a USB cable.
Please note, however, that you will be required to install drivers for the DSL-5
if you proceed with the USB connection option. Click on Install USB Drivers, this
will open a separate program that will install the drivers for you. Once you have
completed with this option, click on Next to continue onto Step 3.
4
Configuring the Router via the D-Link
Click’n Connect Utility
he Click’n Connect utility will guide you through the installation process step-by-
his section is only relevant if you selected Ethernet as the connection type
tep 3 – Select Your Connection Type – Ethernet
you have selected Ethernet as your connection type, connect your Ethernet
T
step. Follow the on-screen instructions, then proceed to the next step.
T
at Step 2. If you selected USB as your connection type, please proceed to
page 7.
S
Follow the on-
ins ,
screen
tructions
then Click
Next to
continue
If
cable from the computer to the DSL-502T now. Wait for the Link LED to flash
then click on Next to continue to Step 4.
5
Configuring the Router via the D-Link
Click’n Connect Utility
The Click’n Connect utility will guide you through the installation process step-by-
step. Follow the on-screen instructions, then proceed to the next step.
This section is only relevant if you selected Ethernet as the connection type
at Step 2. If you selected USB as your connection type, please proceed to
page 7.
Step 4 – Connect the Device to the ADSL Line – Ethernet
you have selected Ethernet as the connection type, connect your ADSL
cket.
nce you have completed this, wait for the ADSL LED to light up, and click on
Follow the on-
screen
instructions,
then Click
Next to
continue
If
telephone line from the wall socket to the DSL-502T ADSL socket. Please note
that if you are using an ADSL Splitter/Filter, you will need to connect the
telephone line from the DSL socket on the filter to the DSL-502T ADSL so
O
Next to continue to Step 5 on Page 9.
6
he Click’n Connect utility will guide you through the installation process step-by-
his section is only relevant if you selected USB as the connection type at
tep 3 – Select Your Connection Type – USB
you have selected USB as your connection type, connect your USB cable from
e computer to the DSL-502T now. Wait for the Link LED to flash, then click on
Configuring the Router via the D-Link
Click’n Connect Utility
T
step. Follow the on-screen instructions, then proceed to the next step.
T
Step 2. If you selected Ethernet as your connection type, please go back to
Page 5.
S
Follow the on-
screen
tructions
then Click
Next to
continue
ins ,
If
th
Next to continue to Step 4.
7
Configuring the Router via the D-Link
Click’n Connect Utility
The Click’n Connect utility will guide you through the installation process step-by-
step. Follow the on-screen instructions, then proceed to the next step.
This section is only relevant if you selected USB as the connection type at
Step 2. If you selected Ethernet as your connection type, please go back to
Page 5.
Step 4 – Connect the Device to the ADSL Line – USB
If you have selected USB as the connection type, connect your ADSL telephone
line from the wall socket to the DSL-502T ADSL socket. Please note that if you
are using an ADSL Splitter/Filter, you will need to connect the telephone line from
the DSL socket on the filter to the DSL-502T ADSL socket.
Once you have completed this, wait for the ADSL LED to light up, and click on
Next to continue to Step 5.
Follow the on-
screen
instructions,
then Click
Next to
continue
8
Configuring the Router via the D-Link
Click’n Connect Utility
The Click’n Connect utility will guide you through the installation process step-by-
step. Follow the on-screen instructions, then proceed to the next step.
Step 5 – Checking Device Connectivity – Ethernet and USB
The Click’n Connect utility will now check the DSL-502T to make sure it has been
connected correctly. Once it has successfully detected your modem, it will
roceed to the next step automatically.
t this point, you may want to prepare your ADSL account information that is
p
A
provided to you by your Internet Service Provider (ISP) as you will require it
shortly.
9
Configuring the Router via the D-Link
Click’n Connect Utility
The Click’n Connect utility will guide you through the installation process step-by-
step. Follow the on-screen instructions, then proceed to the next step.
Step 6 – ISP Configuration – Ethernet and USB
Click Next to
continue
Select your
ISP
Select your
Country
You will now be prompted to select your Country as well as your Internet
Service Provider (ISP). If your ISP is not listed for your country, select Oth
nter the details that are relevant to you er and
r ISP.e
Once you have completed this step, click on Next to continue.
10
Andere Handbücher für DSL-502T
5
Inhaltsverzeichnis
Andere D-Link Netzwerk-Router Handbücher
D-Link
D-Link DGL-4300 - GamerLounge Wireless 108G Gaming... Bedienungsanleitung
D-Link
D-Link DGS-1510 Series Bedienungsanleitung
D-Link
D-Link DSL-584T Bedienungsanleitung
D-Link
D-Link DIR-860L Bedienungsanleitung
D-Link
D-Link DSL-G604T Bedienungsanleitung
D-Link
D-Link DIR-X1530 Bedienungsanleitung
D-Link
D-Link DWM-312 Bedienungsanleitung
D-Link
D-Link DIR-878 Bedienungsanleitung
D-Link
D-Link DIR-300 - Wireless G Router Bedienungsanleitung
D-Link
D-Link DWR-M960 Bedienungsanleitung
D-Link
D-Link DSL-502G Bedienungsanleitung
D-Link
D-Link DFL-260 - NetDefend - Security Appliance Bedienungsanleitung
D-Link
D-Link EXO DIR-1960 Bedienungsanleitung
D-Link
D-Link EAGLE PRO AI AX1500 M15 Bedienungsanleitung
D-Link
D-Link DES-1210-28/ME Bedienungsanleitung
D-Link
D-Link DSL-G604T Bedienungsanleitung
D-Link
D-Link DSL-526B Bedienungsanleitung
D-Link
D-Link DIR-882 Bedienungsanleitung
D-Link
D-Link DIR-120 Bedienungsanleitung
D-Link
D-Link DSL-224 Bedienungsanleitung
Beliebte Netzwerk-Router Handbücher anderer Marken
NETGEAR
NETGEAR FS526T - Switch Bedienungsanleitung
Korenix
Korenix JetNet 5710G Series Bedienungsanleitung
Automated Logic
Automated Logic ZN551 Betriebsanleitung
Cisco
Cisco ASR 1000 Series Bedienerhandbuch
EnGenius
EnGenius ESR-9710 Bedienungsanleitung
Cisco
Cisco 805 Series Bedienungs- und Sicherheitshinweise