D-Link DIR-875 Bedienungsanleitung

HD Media Router 3000

DIR-875

User’s Guide

TABLE OF CONTENT

Introduction ....................................................................................1

Overview of this User’s Guide.....................................................1

Software Installation.......................................................................2

Windows 98se/ME/2000/XP Utility and Driver Installation........2

Wireless Utility Setting ................................................................3

Technical Specifications...............................................................13

INTRODUCTION

Congratulations on your purchase of this 802.11a/b/g/n PCIe Adapter.

This manual helps to get familiar with the Wireless PCIe Adapter. This manual

contains detailed instructions in operation of this product. Please keep this manual

for future reference.

With a Wireless LAN (IEEE 802.11g) mini PCI Adapter, a desktop or laptop

computer can communicate with another computer in a wireless way. Easy-to-use

utilities are bundled with Wireless mini-PCI Adapter for configuration, monitoring,

and diagnosis purposes.

Wireless PCIe Adapter can wirelessly transmit and receive data, minimizing the

need for wired connections, at a speed of up to fifty-four megabit per second.

Wireless PCIe Adapter provides users with an access to real-time information

anywhere in their organization. The mobility provides productivity and service,

which are not available under wired networks. The Wireless PCIe Adapter

configuration is easy to change from peer-to-peer networks, suitable for a small

number of users, to full infrastructure networks of thousands of users that allow

roaming around a broad area.

Overview of this User’s Guide

Introduction. Describes the Wireless PCIe Adapter and its features.

Software Installation. Tells how to setup the driver and the utility setting.

Technical Specifications. Lists the technical (general, physical and environmental)

specifications of the Wireless PCIe Adapter.

SOFTWARE INSTALLATION

This section will lead you to install the driver and utility of the Wireless PCIe

Adapter via Windows OS installation.

Windows 98se/ME/2000/XP Utility and Driver Installation

1. Insert the Wireless LAN mini PCI Adapter Driver & Utility CD-ROM into

computer’s CD-ROM Drive and it will automatically run a setup menu and

install the driver and the utility, for Win98se, please reboot the system to install

the driver to the system properly. In some specific setting on Windows system,

you may need to proceed the software manually, go to your Windows Start

menu and choose Run, type “D:\Utility\Setup.exe” in the dialog box (D:\ will

depend on where your CD-ROM drive is located) and click OK.

2. If you need to install the driver manually, refer each Windows OS to the

following CD-Rom directory path: D:\Drivers\<Windows OS>\SIS163U.INF.

Note: (D:\ will depends on where the CD-ROM drive is located and

<Windows OS> will depend on the Windows Operating System you are using).

3. The Install Shield Wizard screen will appear. Click “Next” to continue.

4. The installation program will help you to setup the Wireless Utility.

Be noted that the Windows XP have its own Wireless Utility; you can either

use the utility of Windows XP or the provided utility.

5. You will see the icon on the Windows task bar when you finish the installation.

When the icon in the toolbar represents in green color, it is properly connected

to the network and if it represents in red color, then it is not connected to the

network.

Wireless Utility Setting

With the Wireless PCIe Adapter utility, users can configure all the functions

provided by the Wireless Monitor Utility. Double-click the utility icon that appears

in the taskbar.

The Wireless Monitor Utility includes seven tabs: Status, Configuration, Advanced,

Profile, Network, Statistics and About.

Status

The Status screen shows you the status of the Wireless Adapter, it shows that where

the device is connected to, the Network mode, the Channel, the transmit rate and

the encryption mode.

There are two dialog boxes showing the data transmitted and the data received. The

two signal lines show the Signal Strength and the Link Quality of the device.

Configuration

The Configuration function helps you to configure the Network and the Security.

Network: the setting of the Network mode, the SSID and the Channels.

Network Mode:

If you want to connect with an Access Point, please set to “Infrastructure” mode. If

you have more stations and just want to set them as local network, please set the

mode to “Ad-Hoc” mode.

Network SSID:

The SSID differentiates one Wireless LAN group name from another; so all access

points and all devices attempting to connect to a specific Wireless LAN group

name must use the same SSID. A device will not be permitted to join the BSS

unless it can provide the unique SSID.

If the SSID parameter is “ANY”, it will detect the strongest signal of the wireless

station.

Channel:

It shows radio channel numbers that used for Wireless LAN networking.

The channel number can be set only under the Ad-Hoc operation mode. In Ad-Hoc

mode stations, each station must have the same channel numbers and SSID.

In Infrastructure mode, the Wireless mini-PCI Adapter will automatically detect the

channel number of the Access Point.

Security: the setting of the Network Encryption.

This function is used to protect wireless communication from eavesdropping. A

secondary function of encryption is to prevent unauthorized access to a wireless

network, and it can be achieved by using the Encryption function.

Encryption Mode:

There are two kinds of encryption mode, WEP encryption and WPA-PSK.

Click the Enable Encryption to activate the security of the mini-PCI Adapter.

WEP-Key: WEP (Wired Equivalent Privacy) relies on a secret key that is

shared between a mobile station and a base station (Access Point).

WEP-Passphrase: the Passphrase in the dialog box helps you to create a

group of WEP key in the Key Setting.

Authentication Mode:

Open System: with the same WEP key between the stations, the stations

don’t need to be authenticated, and this algorithm was set to default.

Shared Key: with the same WEP key between the stations in this

Authentication algorithm, this type will use packets with encryption by

transferring a challenge text which will be acknowledge by both side of the

stations. In order to choose which authentication algorithm will be used, you

must know which one the station supports this algorithm first.

It is recommended to select “Auto” if you are not familiar with the setting.

Default Key (Key 1 ~ Key 4):

You can type the key that you want to use from Key#1 to Key #4, and the key that

you type will be the encryption between the stations that you connected with.

Key Length, Key Format and WEP Key:

If you select 64bit in Hex format, you must type 10 values in the following range

(0~F, hexadecimal), or 64bit in ASCII format, you must type 5 values in the

following range (0~9, A~Z and a~z Alphanumeric).

If you select 128bit in Hex format, you must type 26 values (0~F, hexadecimal), or

128bit in ASCII format, you must type 13 values in the following range (0~9, A~Z

and a~z Alphanumeric).

Be sure that the mini-PCI Adapter and the wireless station were set in the same key.

Note: After all the settings are completed, click Apply to save the setting.

WPA-PSK: WPA-PSK (Wi-Fi Protected Access pre-shared key) is a simpler

version that does not support 802.1x and requires a separate RADIUS server for

mutual authentication.

Enter a Passphrase in the WPA-PSK dialog box. This passphrase must be the same

on each computer that is connected to the wireless network.

Advanced

The Advanced settings help you to control the Wireless Adapter to adjust with

wireless devices in certain environment.

Transmit Rate:

You can choose one of the transmission rates as follows, 54Mbps, 48Mbps,

36Mbps, 24Mbps, 18Mbps, 12Mbps, 11Mbps, 9Mbps, 6Mbps, 5.5Mbps, 2Mbps,

1Mbps, and Fully Automatic. The Fully Automatic will automatically detect the

suitable linking transfer rate and auto fall back when the signal is not too strong to

transmit data, it will auto fall back from 54Mbps to 1 Mbps.

Power Saving:

To set your Wireless Adapter as power saving mode, select “Off”, “Normal” or

“Maximum”.

Transmit Power:

By selecting the Transmit Power, you can select the Radio Frequency output power

from Minimum, 12.5%, 25%, 50%, 100% or Auto.

Preamble Type:

The usage of the preamble is to limit the packet size of the data to transmit. It is

recommended to choose the short preamble when the link quality is bad, it is to

prevent the wasting time of resending a long packet that is lost. The Default is Auto

which access short and long preamble.

Fragment Threshold:

Fragmentation Threshold is a way of transmitting the packets that will be

fragmented. Choose a setting within a range of 256 to 2432 bytes. It is

recommended to fragment the packet when the link quality is bad, it is to prevent

the wasting time of resending a long packet that is lost.

RTS/CTS Threshold:

The RTS/CTS Threshold is a station initiates the process by sending a RTS frame,

the other ends receives the RTS and responds with a CTS frame, the station must

receive a CTS frame before sending the data frame. This is to prevent the collisions

by each station. Choose a setting within a range of 256 to 2432 bytes. It is

recommended limiting a long packet to prevent each station waiting too long to

transmit a data.

Inhaltsverzeichnis

Andere D-Link Netzwerk-Router Handbücher

D-Link

D-Link DIR-120 Bedienungsanleitung

D-Link

D-Link DSL-2770L Bedienungsanleitung

D-Link

D-Link DSL-6740U Bedienungsanleitung

D-Link

D-Link DSL-2540U Bedienungsanleitung

D-Link

D-Link EAGLE PRO AI M15 Bedienungsanleitung

D-Link

D-Link DES-3550 Bedienungsanleitung

D-Link

D-Link Xtreme N DGL-4500 Bedienungsanleitung

D-Link

D-Link DIR-859 Bedienungsanleitung

D-Link

D-Link DSL-2540T Bedienungsanleitung

D-Link

D-Link DIR-300 - Wireless G Router Bedienungsanleitung

D-Link

D-Link Express Ethernetwork DI-704P Bedienungsanleitung

D-Link

D-Link DWR-980 Bedienungsanleitung

D-Link

D-Link DIR-X1550 Bedienungsanleitung

D-Link

D-Link DSL-500 Bedienungsanleitung

D-Link

D-Link DWM-312W Bedienungsanleitung

D-Link

D-Link DSL-3682 Bedienungsanleitung

D-Link

D-Link DIR-842 Bedienungsanleitung

D-Link

D-Link DSL-G604T Bedienungsanleitung

D-Link

D-Link DIR-867 Bedienungsanleitung

D-Link

D-Link DVX-7090 Bedienungsanleitung

D-Link

D-Link DES-6300 Bedienungsanleitung

D-Link

D-Link DES-1008D Bedienungsanleitung

D-Link

D-Link DSL-2540U Bedienungsanleitung

D-Link

D-Link xStackTM DGS-3300 Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise