D-Link DSL-G604T Bedienungsanleitung
©2004 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of
their respective holders. Software and specifications subject to change without notice. DSL-G604T
Wireless ADSL Router
1
ADSL Cable (standard telephone cable)
DSL-G604T
shown with antenna and stand
Ethernet Cable
(CAT5 UTP Straight-Through)
12V, 1.2A Power
Adapter
Before You Begin
1. If you purchased this Router to share your high-speed Internet connection with other
computers, you must have an established Internet account from an Internet Service
Provider (ISP).
2. It’s best to use the same computer that is connected to your router for configuring the
DSL-G604T Wireless ADSL Router. The DSL-G604T acts as a DHCP server and will
assign all the necessary IP address information on your network. See at the Quick
Installation Guide or the Manual on the CD-ROM for setting each network adapter to
automatically obtain an IP address.
Check Your Package Contents
If any of the above items is missing, please contact your reseller.
This product can be set up using
any current web browser, i.e.,
Internet Explorer 6 or Netscape
Navigator 6.2.3.
DSL-G604T
Wireless ADSL Route
r
Using a power adapter with
a different voltage rating will
damage and void the
warranty for this product.
CD-Rom
containing Manual and Warranty
EENGLISH
2
Connecting the Router to your Computer
A. First, connect the power adapter to the power input at the back
panel of the DSL-G604T and then plug the other end of the
power adapter to a wall outlet or power strip. On the front of the
device, the Power LED will turn ON to indicate proper operation.
B. Insert one end of the Ethernet cable into an Ethernet (LAN) port
on the back panel of the DSL-G604T and the other end of the
cable to an Ethernet Adapter or available Ethernet port on your
computer.
C. Insert the telephone cable included with the Router into the
ADSL port, then connect the cable to your telephone line.
D. Check the LED display on the front of the Router to confirm that
the connections have been made.
Power Input
Connect to AC
Adapter
Reset
Push to return to
factory settings
LAN Ports
Connect to the
LAN and other
computers
A
DSL Port
Connect to your
ADSL provider
A
ntenna
Ensures good
wireless reception
3
Configure IP Settings
For Microsoft Windows XP
To connect to the network, make sure the network adapter in
your computer is configured properly. Here’s how to configure
the network adapter to obtain an IP address automatically for
the DSL-G604T Wireless ADSL Router.
Go to Start > select
Settings > click
Control Panel >
Double-click on the
Network
Connections icon
Double-click on
Network Connections
Right-click the
Local Area
Connection icon,
and then select
Properties.
Select Properties
EENGLISH
4
The dialog box displays with a
list of currently installed
network items.
Click Internet Protocol
(TCP/IP)
Make the choice to get IP
settings assigned
automaticall
y
.
Select Obtain an IP address
automatically
Click OK
Click Properties
5
Using additional Ethernet (CAT5 UTP) cables, connect your Ethernet-
equipped computers to the LAN ports on the back panel of the DSL-
G604T.
When you have completed the steps in this Quick Installation Guide,
your connected network should look similar to this:
Connecting Additional Computers
To The DSL-G604T
Wireless ADSL Router
EENGLISH
6
Configuring the Router
You can select two methods to configure your new router. The first
method is by using D-Link Click’n Connect Utility, which is included on
the CD designed to run on Windows XP/2000. Just follow the instructions
step by step to configure your router for Internet access for the first time.
The second method is to use your Web browser to access the built in
web server pages used to setup the Router, your computer’s network
adapter must be configured to “Obtain an IP address automatically”, that
is, you must set the IP network settings of your computer so it is DHCP
Client. If you are using Windows XP and do not know how to change your
network settings, skip ahead to Appendix and follow the instructions
provided. You may also read the User Manual for instructions on
changing IP settings for computers running other Windows operating
systems.
Open your Web browser and
type http://192.168.1.1 into
the URL address box. Press
Enter or Return.
The Home/Login page
appears.
When you first log in, your
Login Name is admin;
your password is also
admin. These may be
changed later.
Click Login
7
The Home screen
appears. Click on
the Setup tab to
bring up the Setup
menu.
Click Setup
Click the
Connection 1
button to go to the
configuration menu
to make the Internet
connection.
Click
Connection 1
EENGLISH
8
Configuring the WAN
Connection
Check your ISP information,
If you configure for PPPoA type, refer to Manual page 25-27.
If you configure for PPPoE type, refer to Manual page 27-28.
If you configure for Bridge type, refer to Manual page 29-30.
If you configure for DHCP type, refer to Manual page 32-33.
If you configure for CLIP type, refer to Manual page 33-34.
In the Connection 1
window, type the
Username and
Password used to verify
the identity of your ISP
account. Click the Apply
button when you have
entered the information.
Click Apply
Enter the Username and
Password assigned by
your ISP.
9
Configure Connection 1 for PPPoA
To configure the default connection type (PPPoA) for Connection 1,
follow the steps listed below. To change the connection type of
Connection 1 to an alternative type follow the instructions according to
the desired type as described below in change the connection type.
Type the
Username and
Password used
for your account.
Click the
Connection 1
button to view
the PPPoA
Connection
Setup menu
pictured.
EENGLISH
Select PPPoA
from the Type,
VPI: and VCI: -
if these values
are not correct,
change these
according to the
instruction of
y
our ISP.
Click the
Apply button
after you have
entered the
account
information.
10
Click Tools
when you
have applied
the new
settings.
Click
System
Commands
to view the
menu used
to save
changes.
Andere Handbücher für DSL-G604T
17
Inhaltsverzeichnis
Andere D-Link Netzwerk-Router Handbücher
D-Link
D-Link DSL-504 Bedienungsanleitung
D-Link
D-Link DSL-2540U Bedienungsanleitung
D-Link
D-Link DIR-605L Bedienungsanleitung
D-Link
D-Link SharePort DIR-825 Bedienungsanleitung
D-Link
D-Link DI-704GU Bedienungsanleitung
D-Link
D-Link G413K Bedienungsanleitung
D-Link
D-Link DWR-555 Bedienungsanleitung
D-Link
D-Link DAS-3626 Bedienungsanleitung
D-Link
D-Link Air Premier DAP-2695 Bedienungsanleitung
D-Link
D-Link Covrax COVR-X1870 Bedienungsanleitung
D-Link
D-Link DIR-885L Bedienungsanleitung
D-Link
D-Link DGS-3700-12 Bedienungsanleitung
D-Link
D-Link DSL-2740U Bedienungsanleitung
D-Link
D-Link DSL-2740M Bedienungsanleitung
D-Link
D-Link DIR-878 Bedienungsanleitung
D-Link
D-Link DES-3204 Bedienungsanleitung
D-Link
D-Link DIR-X5460 Bedienungsanleitung
D-Link
D-Link R12 Bedienungsanleitung
D-Link
D-Link DSL-500 Bedienungsanleitung
D-Link
D-Link DSL-245GR Bedienungsanleitung
Beliebte Netzwerk-Router Handbücher anderer Marken
NETGEAR
NETGEAR FS526T - Switch Bedienungsanleitung
Korenix
Korenix JetNet 5710G Series Bedienungsanleitung
Automated Logic
Automated Logic ZN551 Betriebsanleitung
Cisco
Cisco ASR 1000 Series Bedienerhandbuch
EnGenius
EnGenius ESR-9710 Bedienungsanleitung
Cisco
Cisco 805 Series Bedienungs- und Sicherheitshinweise