D-Link Express EtherNetwork DI-604 Bedienungsanleitung
Before Your Begin
1. If you purchased this router to share your high-speed Internet connection with
other computers, you must have either an Ethernet-based Cable or a DSL modem
with an established Internet account from an Internet Service Provider (ISP).
2. It’s best to use the same computer that is connected to your modem for
configuring the DI-604 router. The DI-604 Router acts as a DHCP server and will
assign all the necessary IP address information on your network. See Appendix
at the end of this Quick Installation Guide or the Manual on the CD-ROM for
setting each network adapter to automatically obtain an IP address.
Check Your Package Contents
These are the items included with your DI-604 purchase:
If any of the above items are missing, please contact your reseller.
©2002 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective
holders. Software and specifications subject to change without notice. DI-604.05082002
This product can be set up using any current
web browser, i.e., Internet Explorer 5x,
Netscape Navigator 4x.`
DI-604
Express EtherNetwork™
Broadband Router
• DI-604 Ethernet Broadband Router
• CD-ROM (containing Manual and Warranty)
• Ethernet (CAT5 UTP/Straight-Through) Cable
• 5V DC, 2A Power Adapter
Using a powe
r
supply with a
different voltage rating
will damage and void
the warranty for this
product.
Connecting The DI-604 Broadband Router
To Your Network
A. First, connect the power adapter to the receptor at the back panel of
the DI-604 and then plug the other end of the power adapter to a wall
outlet or power strip. The Power LED will turn ON to indicate proper
operation.
B. Insert one end of an Ethernet cable to the WAN port on the back
panel of the DI-604 and the other end to the Ethernet port located on
your Cable or DSL modem. The WAN LED light will illuminate to
indicate proper connection.
C. Insert one end of an Ethernet cable to LAN port 1 on the back panel
of the DI-604 and the other end to an available Ethernet port on the
network adapter in the computer you will use to configure the DI-604.
The LED light for LAN Port 1 will illuminate to indicate proper
connection. (Note: Some computers already have network adapters
pre-installed.)
Restart Your Computer
A
.Receptor for
Power Ada
p
te
r
B.WAN Port
This is the
connection for the
Ethernet Cable to
Ethernet Port on the
Cable or DSL
Modem.
C.LAN Ports
These are the
connections for
Ethernet cables to
your Ethernet-
enabled com
p
uters
Reset Button
Pressing this button
restores the router
to its original factory
default settings.
Connecting Additional Computers To The
DI-604 Broadband Router
Using additional Ethernet (CAT5 UTP/Straight-Through) cables, connect
your Ethernet-equipped computer(s)to one of the 3remaining Ethernet
LAN ports on the back panel of the DI-604.
When you have completed the steps in this Quick Installation Guide, your
connected network should look similar to this:
LAN Port LEDs. Each of the
LAN ports on the back of the
DI-604 have a corresponding
LED light on the front panel
of the unit. When a proper
connection has been made
to a computer that is ON, the
LED on the front panel
should illuminate.
Cable or DSL
Modem
DI-604 Ethernet
Broadband Router
Computers connected
to the LAN Ports
Using The Setup Wizard
The logon pop-up
screen will appear.
Once you have
logged in, the
Home screen
will appear.
Open your Web
browser and type
“http://192.168.0.1” into
the URL address box.
Then press the Enter or
Return key.
Type “admin” for the
username and leave the
password field blank.
Click OK
Click Run Wizard
You will see the following screens.
Step 1 - Set up your new password.You have the option to establish a password.
Click Next
Click Next
The Setup Wizard (continued)
Select the type of Internet connection for your router.
If you selected Dynamic
IP Address, this screen
will appear:
Select one
of these
settings
If you are unsure of which setting to
select, please contact your Internet
Service Provider.
Click
Next
Click the “Clone MAC
Address” button to
automatically copy the
MAC address of the
network adapter in your
computer. You can also
manually type in the
MAC address. What is a MAC address? Each
network adapter has a discrete
Media Access Control (MAC)
address. Note that some computers
and peripherals may already include
built-in network adapters.
Click Next
If your ISP requires a Static IP
Address, and this option is
selected, then this screen will
appear:
If your ISP uses PPPoE (Point-to-
Point Protocol over Ethernet) and
this option is selected, then this
screen will appear:
Do not use
the numbers
displayed in these
fields. They are only
shown as an example.
Do not use
the numbers
displayed in these
fields. They are only
shown as an example.
Enter the IP address
information originally
provided to you by your
ISP. You will need to
complete all the required
fields.
Click Next
Enter in the username
and password provided
to you by your ISP.
Click Next
Your Setup is Complete!
Test Your Internet Connection
Relaunch your Web browser (i.e.,
Internet Explorer or Netscape
Navigator), to link to your favorite
Web site to test your Internet
connection.
For additional settings or
information, refer to the
Advanced, Tools, or Status tabs
on the web-management interface;
or to the manual located on the
CD-ROM.
Click Restart
Click Exit
APPENDIX
To connect to the network, make sure
the network adapter in your computer
is configured properly. Here’s how to
configure the network adapter to obtain
an IP address automatically for the
DI-604 Broadband Router.
For Microsoft Windows XP:
Go to Start > right click on
My Network Places >
select Properties > Double-click on
the Network Connection associated
with the Ethernet adapter (i.e.,
D-Link DFE-530TX+).
Click Internet Protocol (TCP/IP)
Click Properties
Select Obtain an IP address
automatically
Click OK
Restart your
computer
For Apple Macintosh OS X:
Go to the Apple Menu
and Select System
Preferences.
The IP address information,
the Subnet Mask, the Router’s
IP address and the Ethernet
adapter address will appear.
Click on
Network
Select Built-in
Ethernet in the Show
pull-down menu
Select Using DHCP
in the Configure pull-
down menu
Click on
Apply Now
Andere Handbücher für Express EtherNetwork DI-604
7
Inhaltsverzeichnis
Sprachen:
Andere D-Link Netzwerk-Router Handbücher
D-Link
D-Link DI-804 Bedienungsanleitung
D-Link
D-Link DSL-125 Bedienungsanleitung
D-Link
D-Link DIR-605LB2 Bedienungsanleitung
D-Link
D-Link DGS-3224TGR - Switch Bedienungsanleitung
D-Link
D-Link DI-824VUP+ 2.4GHz Wireless VPN Router and Print... Bedienungsanleitung
D-Link
D-Link DIR-1750 Bedienungsanleitung
D-Link
D-Link DSL-2740B Bedienungsanleitung
D-Link
D-Link DSL-2790U Bedienungsanleitung
D-Link
D-Link DWC-1000 Bedienungsanleitung
D-Link
D-Link DIR-655 - Xtreme N Gigabit Router Wireless Bedienungsanleitung
D-Link
D-Link DIR-868L Bedienungsanleitung
D-Link
D-Link DIR-853 Bedienungsanleitung
D-Link
D-Link DGS-1016D - Switch Bedienungsanleitung
D-Link
D-Link dgs-8000 SERIES Handbuch
D-Link
D-Link DSL-2750E Bedienungsanleitung
D-Link
D-Link Router Bedienungsanleitung
D-Link
D-Link DIR-868L Bedienungsanleitung
D-Link
D-Link EAGLE PRO AI AX1500 M15 Bedienungsanleitung
D-Link
D-Link DIR-878 Bedienungsanleitung
D-Link
D-Link DIR-830M Bedienungsanleitung
Beliebte Netzwerk-Router Handbücher anderer Marken
NETGEAR
NETGEAR FS526T - Switch Bedienungsanleitung
Korenix
Korenix JetNet 5710G Series Bedienungsanleitung
Automated Logic
Automated Logic ZN551 Betriebsanleitung
Cisco
Cisco ASR 1000 Series Bedienerhandbuch
EnGenius
EnGenius ESR-9710 Bedienungsanleitung
Cisco
Cisco 805 Series Bedienungs- und Sicherheitshinweise