D-Link DPR-1260 - RangeBooster G Multifunction Print... Bedienungsanleitung

Wireless G USB 2.0 Adapter

Wireless Print Server

with 3G Mobile Video

2D-Link DPR-1260 Quick Install Guide

Package Contents

System Requirements

If any of the above items are missing, please contact your reseller.

Manual and Software on CD

D-Link DPR-1260

Multi-Function Print Server

CAT5 Ethernet Cable Power Adapter

Note: Using a power supply with a different voltage rating than the one included with

the DPR-1260 will cause damage and void the warranty for this product.

• 10/100 Fast Ethernet Wired or 802.11b/g Wireless Network

• Printer with USB Port*

• Computer with:

• Windows® XP (SP2) or Windows 2000 (SP4) or

Mac OS® X (v10.4/v10.3)

• Internet Explorer v6 or Mozilla Firefox

• CD-ROM Drive

• Network Interface Card

* For a list of compatible printers, visit http://support.dlink.com.

3 D-Link DPR-1260 Quick Install Guide

Hardware Overview

Connections

Power Receptor

Receptor for the Power Adapter.

LAN Port

Connect to a network using an

Ethernet cable.

USB Ports

Connect USB printers using an USB

cable.

Reset Button

Pressing the Reset Button restores the router

to its original factory default settings.

4D-Link DPR-1260 Quick Install Guide

Hardware Overview

LEDs

Power LED

A solid light indicates a proper

connection to the power supply.

LAN LED

A solid light indicates connection on

the LAN port. This LED blinks during

data transmission.

WLAN LED

A solid light indicates that the wireless

segment is ready. This LED blinks during

wireless data transmission.

USB LEDs (1-4)

A solid light indicates connectivity to an

USB printer or scanner.

5 D-Link DPR-1260 Quick Install Guide

Connect an Ethernet cable to the Ethernet connector located on the

Print Server’s back panel and attach it to the network.

Note: It is required that an Ethernet cable is used during initial

setup. Once your wireless conﬁguration is set, you may disconnect

the Ethernet cable and begin communicating wirelessly with your

DPR-1260.

Attach the external power supply to the DC power input connector

located on the Print Server’s bottom panel and connect it to a power

outlet or power strip.

The factory default IP address of the DPR-1260 is 192.168.0.10.

The IP address of the DPR-1260 must be in the same range as your

network. You can change the IP address of the DPR-1260 to match

the IP address scheme of your existing network. To access the Print

Server’s Web conﬁguration interface, assign an IP address on one

of the wired PCs on your network to the same IP scheme as the

Print Server.

Note: Some printer software features may not work while connected

to the print server such as ink level display.

Installation

6D-Link DPR-1260 Quick Install Guide

Go to Start > right-click on My

Network Places > select

Properties > right-click on the

Network Connection associated with

your Network Adapter and select

Properties

Click Internet Protocol (TCP/IP)

and click Properties.

Input a static IP address in the

same range as the print server

(192.168.0.xx).

Select Use the Following IP

Address and enter an IP address

(192.168.0.28) and a Subnet Mask

(255.255.255.0). Click OK to save

the new IP address.

Once you are ﬁnished conﬁguring

your print server, you can change

the settings back.

7 D-Link DPR-1260 Quick Install Guide

D-Link Setup Wizard

To access the conﬁguration utility, open a web-browser such as

Internet Explorer and enter the IP address of the print server

(192.168.0.10).

If you get a Page Cannot be Displayed error, please refer to the

Troubleshooting section of the manual for assistance.

Click Next to continue.

8D-Link DPR-1260 Quick Install Guide

Click the radio button next

to the printer you want to

configure. Click Next to

continue.

Click Next to continue.

You may need to insert

your printer driver CD to

load the drivers to your

computer.

Click Finish to complete

the setup wizard.

9 D-Link DPR-1260 Quick Install Guide

Wireless Settings

If you want to connect to a

wireless network, click on

Setup and then click Wireless

Settings on the left side.

Set the Wireless on/off to

On. If you want to disable the

wireless feature, select Off.

Enter the Wireless Network Name (SSID) of your wireless network.

If you are connecting to an access point or wireless router, select

Infrastructure. If you are connecting directly to a computer with a

wireless adapter, click Ad-Hoc.

Select None (to use connect to an unsecure network), WEP, or

WPA.

10D-Link DPR-1260 Quick Install Guide

WEP Encryption

It is recommended to enable encryption on your wireless router before

your wireless print server. Please establish wireless connectivity

before enabling encryption. Your wireless signal may degrade when

enabling encryption due to the added overhead.

1. Log into the web-based

conﬁguration by opening a

web browser and entering

the IP address of the print

server (192.168.0.10).

Click on Setup and then

Wireless Settings on the

left side.

2. Next to Security Mode,

select WEP.

3. Next to Authentication, select Shared Key.

4. Select either 64-bit or 128-bit encryption from the drop-down

menu next to WEP Encryption.

5. Next to Key Type, select either Hex or ASCII.

Hex (recommended) - Letters A-F and numbers 0-9 are valid.

ASCII - All numbers and letters are valid.

6. Next to Key 1, enter a WEP key that you create. Make sure you

enter this key exactly on all your wireless devices. You may enter

up to 4 different keys.

7. Click Save Settings to save your settings. If you are conﬁguring

the router with a wireless adapter, you will lose connectivity until

you enable WEP on your adapter and enter the same WEP key

as you did on the router.

Andere Handbücher für DPR-1260 - RangeBooster G Multifunction Print...

Inhaltsverzeichnis

Andere D-Link Druckserver Handbücher

D-Link

D-Link DP-311P - Air Print Server Bedienungsanleitung

D-Link

D-Link DP-313 - Air 802.11b Wireless Print Server Bedienungsanleitung

D-Link

D-Link DPR-1040 Bedienungsanleitung

D-Link

D-Link DPR-1260 - RangeBooster G Multifunction Print... Bedienungsanleitung

D-Link

D-Link DP 301U Bedienungsanleitung

D-Link

D-Link AirPlus DP-G310 Bedienungsanleitung

D-Link

D-Link DP-300 Bedienungsanleitung

D-Link

D-Link DP-311U Bedienungsanleitung

D-Link

D-Link DPR-1040 Bedienungsanleitung

D-Link

D-Link DP-311U Bedienungsanleitung

D-Link

D-Link AirPlus DP-G321 Bedienungsanleitung

D-Link

D-Link DP-300 Installationshandbuch

D-Link

D-Link Epress EtherNetwork DP-301P+ Bedienungsanleitung

D-Link

D-Link DPR-1061 Bedienungsanleitung

D-Link

D-Link DP-300U Bedienerhandbuch

D-Link

D-Link DP-300+ Bedienungsanleitung

D-Link

D-Link DP-313 - Air 802.11b Wireless Print Server Bedienungsanleitung

D-Link

D-Link DP-300U Bedienungsanleitung

D-Link

D-Link DP-300+ Bedienungsanleitung

D-Link

D-Link AirPlus DP-G310 Bedienungsanleitung

D-Link

D-Link DPR-1020 Bedienungsanleitung

D-Link

D-Link DP 301U Bedienerhandbuch

D-Link

D-Link AirPlus DP-G310 Bedienungsanleitung

D-Link

D-Link AirPlus G DP-G310 Bedienungsanleitung

Beliebte Druckserver Handbücher anderer Marken

Digitus

Digitus DN-13003-1 Bedienungsanleitung

Edimax

Edimax PS-1206PWg Bedienungsanleitung

Intellinet

Intellinet 509077 Bedienungsanleitung

Atlantis Land

Atlantis Land NETSERVER A02-PSU_GX02 Bedienungsanleitung

Buffalo

Buffalo LPV4-U2-300S Bedienungsanleitung

Zonet

Zonet ZPS1000 Bedienungsanleitung

TRENDnet

TRENDnet TEW-P11G Bedienungsanleitung

Axis

Axis 140 BJC Bedienungsanleitung

HP Jetdirect 280m - 802.11b Wireless Print... Bedienungsanleitung

MicroNet

MicroNet SP766W Bedienungsanleitung

NETGEAR

NETGEAR PS104 - Hub - EN Bedienungsanleitung

Axis

Axis AXIS 1610 Bedienungsanleitung

Buffalo

Buffalo LPV4-U2-300S Bedienungsanleitung

Axis

Axis 5600+ Bedienungsanleitung

LevelOne

LevelOne WPS-9123 Bedienungsanleitung

NETGEAR

NETGEAR PS105 Bedienungsanleitung

Xerox

Xerox FreeFlow Print Server V9 SP3 Bedienungsanleitung

SEH

SEH primos Bedienungsanleitung