INTRODUCTION
The DK-200/DK-210 functions as a squeeze keyer with the DASH/DOT memory
The ratio of DASH/DOT and SPACE can be adjusted with the WEIGHT Control
With the WEIGHT control feature, you can adjust for the best DASH/DOT and SPACE ratio for each
operating speed
Two types of keying outputs are available: GRID BLOCK and DIRECT
A side-tone oscillator built in
LED speed indicator (Model DK-210 only)
The DK-200/DK-210 can be powered by a 9 Volt battery
Three modes: Automatic, Semi-Automatic and Tune (continuous tone) can select by MODE switch
SPECIFICATIONS
Speed 8 WPM 50 WPM
Side-tone oscillator frequency 500 3000 Hz
Keying output circuitry GRID BLOCK: 100 V, 10 mA max
DIRECT: +300 V, 100 mA max , –100 V, 10 mA
Power consumption 13 8 VDC (9 15 V) approx 100 mA / DK-200
200 mA / DK-210
or a 9 Volt battery can be installed inside the cabinet
Dimensions 150 mm W × 62 mm H × 150 mm D; 0,9 kg
LED Speed indicator DK-210 only
Other
RCA plug 2 pcs
Stereo phone plug 1 pc
DC plug with cord 1 pc
NOTE: The keyer can be operated by an AC adaptor (DC 12 V, 200 mA; maximum voltage of the
adaptor should not be exceeded DC 15 V when no load connecting)
PARALLEL CONNECTION OF TRANSCEIVERS
