Danfoss Devireg 535 Gebrauchsanweisung

Setting up your Devireg 535 programmable thermostat with

your devimat system

Devireg 535

Selection of sensor type

Power on the thermostat

With the front oﬀ, with

a small screwdriver

or pencil press the

installation button.

Select the ﬂoor sensor

To change the default setting, press

land use the arrow buttons  to

select your choices. Press lto accept

your choice.

Press for the next setting.

Maximum ﬂoor temperature.

- Tiles on timber based ﬂoor = 29°C

- Tiles on concrete based ﬂoor = 40°C

- Timber covered ﬂoors = 27°C

(parquet etc. - Please check with

ﬂoor supplier).

To change this setting, press land

use the arrow buttons  to select

your choice. Press lto accept your

choice.

Press for the next setting.

Scale

When selecting Celsius, the display

will show the actual temperature at

the ﬂoor sensor.

To change this setting, press land

use the arrow buttons  to select

your choice.

Press lto accept your choice.

The installation procedure is now ﬁnished.

You can use the  for going back or forward through

the settings, otherwise:

Press the installation pinhole to exit

installation mode.

Put the frame and front back on.

You enter the settings by pressing the

pinhole with a small screw driver,

pencil, the display now changes from

temperature to time display.

By pressing the l, the hours starts

ﬂashing - you can now change them

with the .

Press the lagain to change the

minutes with the .

To ﬁnish, press lthen 

Setting the time

Setting the weekday

Mon Tue Wed Thu Fri Sat Sun

By pressing the l, the weekday starts

ﬂashing - you can now change them

with the .

Press the lto accept.

To ﬁnish press 

Setting the timer periods

The ﬁrst period bar ﬂashes

indicating this is the morning period.

By pressing the l, the start time of

the period starts ﬂashing. You can

change it with the arrow buttons

 in increments of 15 minutes.

Press the lto accept.

The second (day), third (evening) and

fourth (night) period bars are set as

mentioned above.

Setting the comfort temperature

By pressing the l, the preset comfort

temperature starts ﬂashing.

You can change it with the arrow

buttons 

Press lto accept, then press 

Setting the set back temperature

(second and fourth period)

By pressing the l, the preset comfort

temperature starts ﬂashing, normally

this is set to OFF.

You can change it with the arrow

buttons 

Press lto accept.

Then press the pinhole with a

small screwdriver or pencil.

Changing timer program

To change the program:

Keep the lbutton pressed for 2

seconds.

The actual program starts to flash.

It is now possible to change the

program by using the buttons 

Press the lto accept.

P1 - Manual mode

On constantly 24 hours 7 days a week

at set temperature.

Set temperature - twice a day.

Set temperature all day.

Set temperature Monday - Friday

twice a day.

Saturday - Sunday all day.

Part no.: 001v01 28.06.10

Andere Danfoss Thermostat Handbücher

Danfoss

Danfoss ECL Comfort 310, A376 Bedienungsanleitung

Danfoss

Danfoss Eco Bedienungsanleitung

Danfoss

Danfoss RET 230 Bedienungsanleitung

Danfoss

Danfoss TRONE-RF Bedienungsanleitung

Danfoss

Danfoss RET 230 HCW-3 Bedienungsanleitung

Danfoss

Danfoss FH-WS Bedienungsanleitung

Danfoss

Danfoss ECtemp 532 Bedienungsanleitung

Danfoss

Danfoss ECtemp 550 Bedienungsanleitung

Danfoss

Danfoss Link FT Bedienungsanleitung

Danfoss

Danfoss CET2000B-RF Bedienungsanleitung

Danfoss

Danfoss TP5001 series Bedienungsanleitung

Danfoss

Danfoss ECL Comfort 310, A361 Bedienungsanleitung

Danfoss

Danfoss RET B-LS Bedienungsanleitung

Danfoss

Danfoss Living Eco Bedienungsanleitung

Danfoss

Danfoss RET2000 M Bedienungsanleitung

Danfoss

Danfoss Living Eco Bedienungsanleitung

Danfoss

Danfoss ST-S2 Bedienungsanleitung

Danfoss

Danfoss Basic Plus2 Bedienungsanleitung

Danfoss

Danfoss ECL Comfort 310, P330 Bedienungsanleitung

Danfoss

Danfoss RMT-230 Bedienungsanleitung

Danfoss

Danfoss ST-D1 Bedienungsanleitung

Danfoss

Danfoss HCS6101-3 Gebrauchsanweisung

Danfoss

Danfoss ECL Comfort 210 Bedienungsanleitung

Danfoss

Danfoss FH-CWT Bedienungsanleitung

Beliebte Thermostat Handbücher anderer Marken

EWELLY

EWELLY EW-181 Bedienungsanleitung

Prolon

Prolon T1100 Montageanleitung

Computherm

Computherm Q20 Bedienungsanleitung

Heatmiser

Heatmiser neoStat Bedienungsanleitung

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Bedienungsanleitung

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung

Saswell

Saswell SAS920XWHB-7-S-RF Leitfaden

Aircalo

Aircalo TFP1-ET85P2 Bedienungsanleitung

Honeywell

Honeywell CM721 Bedienungsanleitung

Carrier

Carrier DEBONAIR 33CS Bedienungsanleitung

Lennox

Lennox iHarmony Zone Thermostat Montageanleitung

Gemtech

Gemtech GT7000 Bedienungsanleitung

Rollei

Rollei Smartes 45000 Bedienungsanleitung

Sinope

Sinope TH1300RF Bedienungsanleitung

Honeywell

Honeywell RLV4305 Bedienungsanleitung

Honeywell

Honeywell Prestige 2.0 THX9421 Bedienungsanleitung

NuTone

NuTone NTBZ48 Original Betriebsanleitung

Stelpro

Stelpro MAESTRO ASMT402AD Bedienungsanleitung