Danfoss TP5000 si range Bedienungsanleitung

Fig.1

Space for additional

logo if required TP5000

User Instructions

Mon-Fri Sat-Sun

Event Time Temp°C Event Time Temp°C

1 06.30 20 1 07.00 20

2 08.30 15 2 16.00 21

3 11.30 20 3 23.00 15

4 13.30 15 4 00.00 15

5 16.30 21 5 01.00 15

6 22.30 15 6 01.59 15

Fig.2

i2 00

Before programming the thermostat press the + & – AND ∧∧

∧∧

∧and ∨∨

∨∨

∨ buttons

simultaneously to reset the unit (Fig.1)

Setting the Clock and Day

Press PROG (Fig.2) to begin programming

Use + or – buttons (Fig.3) to adjust the TIME (Fig.4)

Press PROG again (Fig.2)

Use + or – buttons (Fig.3) until correct DAY is shown (Fig.5)

(1 = Monday, 2 = Tuesday, etc)

Accepting the Factory Pre-settings

The TP5000 has pre-set times already programmed in, which often suit most

people (see Table below).

To accept these settings close the front cover and after 2 minutes the pre-

settings will automatically be accepted.

To adjust the factory pre-settings & set your own time and

temperature programmes

For Days 1-5 (weekdays)

a) Press PROG (Fig.2) 3 times to show the 1st pre-set time and temperature

(Event 1 Days 1,2,3,4,5) (Fig.6)

b) Use + or – buttons (Fig.3) to adjust the TIME (press and hold to change in

10 min increments)

c) Use ∧∧

∧∧

∧or ∨∨

∨∨

∨ buttons (Fig.7) to adjust the TEMPERATURE

d) Press PROG (Fig.2) to move to next preset time & temp (Event 2) (Fig.8)

e) Repeat steps b, c & d for programming Events 3, 4 5 & 6

For Days 6-7 (weekends)

●Press PROG (Fig.2) to show 1st pre-set time and temperature (Event 1

Days 6-7) (Fig.9)

●Repeat steps b, c and d above to programme time and temperature events

for the weekend

Returning to RUN mode

Press PROG (Fig.2) – the colon in the LCD display will start to flash (Fig.10)

Fig.6

Fig.7

Fig.5

Fig.3

Fig.4

Fig.8

i2 24

12345

6 30

7 00

12345

8 30

Fig.9

Fig.10

Danfoss Randall Ltd

Ampthill Road

Bedford, MK42 9ER

Tel: 01234 364621

Fax: 01234 219705

Email: [email protected]

Website: www.danfoss-randall.co.uk

Fig.14

Fig.16

Fig.12

Fig.13

Fig.11

Temporary User Overrides

The TP5000 has several useful overrides which can be selected without

affecting the thermostat programming

•Selection of time or actual room temperature in main LCD display –

press + and – together to change between settings (Fig.11)

•Temporary override of programmed temperature – press ∧∧

∧∧

∧or ∨∨

∨∨

∨ until

required temperature is displayed (override will automatically cancel at

beginning of next programmed event) (Fig.12)

•Temporary use of weekend programmes – press ∧∧

∧∧

∧and ∨∨

∨∨

∨ together

once (override cancels at 2:00am) (Fig.13)

•Frost Protection – a constant low temperature can be selected whilst

away from home - press ∧∧

∧∧

∧and ∨∨

∨∨

∨ together twice (Fig.14). To return to

automatic programming press ∧∧

∧∧

∧and ∨∨

∨∨

∨ together again

Summer Time / Winter Time Clock

●To change from Summer to Winter (clocks back) -

press and hold - button (Fig.15)

●To change from Winter to Summer (clocks forward) -

press and hold + button (Fig.15)

Battery Replacement

●A low battery symbol will flash in the LCD display (Fig.16)

●You have 15 days to replace the battery before the unit will switch off.

●When changing batteries, remove old batteries and insert new ones within

ONE MINUTE and programming will not be lost.

NB. If the display ever goes blank during normal operation, the batteries will

need to be renewed, the unit reset and the time and programmes reset.

Selection of time

or actual room

temperature

in main LCD

Temporary

override of

programmed

temperature

x 2

03 57

Temporary use

of weekend

programmes

Frost

Protection

Fig.15

Clocks

forward

Clocks

back

Andere Handbücher für TP5000 si range

Andere Danfoss Thermostat Handbücher

Danfoss

Danfoss ECtemp Next Plus Bedienungsanleitung

Danfoss

Danfoss TPOne-M Bedienungsanleitung

Danfoss

Danfoss RET 230 HCW-3 Bedienungsanleitung

Danfoss

Danfoss ECtemp 530 Bedienungsanleitung

Danfoss

Danfoss EFIT 550 Bedienungsanleitung

Danfoss

Danfoss 088U0215 Bedienungsanleitung

Danfoss

Danfoss RET M Betriebsanleitung

Danfoss

Danfoss TP7001 series Bedienungsanleitung

Danfoss

Danfoss living connect Bedienungsanleitung

Danfoss

Danfoss FH-CWD Bedienungsanleitung

Danfoss

Danfoss ECtemp Next Plus HW Bedienungsanleitung

Danfoss

Danfoss RA 2000 valve Bedienungsanleitung

Danfoss

Danfoss RT 115 Bedienungsanleitung

Danfoss

Danfoss Icon Wireless Dial Bedienungsanleitung

Danfoss

Danfoss ECtemp Next Plus Bedienungsanleitung

Danfoss

Danfoss TP7001 series Bedienungsanleitung

Danfoss

Danfoss KP61 Bedienungsanleitung

Danfoss

Danfoss FH-WT Bedienungsanleitung

Danfoss

Danfoss ECL Comfort 210 Bedienungsanleitung

Danfoss

Danfoss ECtemp 330 Bedienungsanleitung

Danfoss

Danfoss Icon Master Bedienungsanleitung

Danfoss

Danfoss DEVIreg 233 Bedienungsanleitung

Danfoss

Danfoss CF-RP 088U0211 Bedienungsanleitung

Danfoss

Danfoss RMT-24 Bedienungsanleitung

Beliebte Thermostat Handbücher anderer Marken

EWELLY

EWELLY EW-181 Bedienungsanleitung

Prolon

Prolon T1100 Montageanleitung

Computherm

Computherm Q20 Bedienungsanleitung

Heatmiser

Heatmiser neoStat Bedienungsanleitung

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Bedienungsanleitung

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung

Saswell

Saswell SAS920XWHB-7-S-RF Leitfaden

Aircalo

Aircalo TFP1-ET85P2 Bedienungsanleitung

Honeywell

Honeywell CM721 Bedienungsanleitung

Carrier

Carrier DEBONAIR 33CS Bedienungsanleitung

Lennox

Lennox iHarmony Zone Thermostat Montageanleitung

Gemtech

Gemtech GT7000 Bedienungsanleitung

Rollei

Rollei Smartes 45000 Bedienungsanleitung

Sinope

Sinope TH1300RF Bedienungsanleitung

Honeywell

Honeywell RLV4305 Bedienungsanleitung

Honeywell

Honeywell Prestige 2.0 THX9421 Bedienungsanleitung

NuTone

NuTone NTBZ48 Original Betriebsanleitung

Stelpro

Stelpro MAESTRO ASMT402AD Bedienungsanleitung