Datalogic Multi Purpose Holder Bedienungsanleitung

Multi Purpose Holder Mounting Instructions

Use these instructions to install the Multi Purpose Holder. Options for mounting include:

• Double-sided adhesive tape (horizontal surfaces only)

• Screws (secure to sheet metal and/or wood surfaces)

Installation Using Double-Sided Adhesive Tape

1. Clean the tape application area on the holder shown in Figure 1a using a lint-free towel or cloth

moistened with alcohol. Clean the area where the holder is to be installed in the same manner. Let all

cleaned areas dry completely before proceeding.

2. Individually peel each of the two pieces of double-sided tape from the backing and adhere them to the

cleaned areas in the locations and orientation shown in Figure 1b. Press firmly and smooth evenly for

several seconds to ensure all surfaces make good contact.

Figure 1. Applying the Double-Sided Tape

3. Remove the remaining masking from the installed pieces of double-sided tape and align the holder

above the desired installed position (for reference, the front of the holder is marked on both the tem-

plate and on the holder itself).

4. Adhere the holder by pressing down firmly (20 lbs of force is recommended) for several seconds. For

best tape adhesion, do not use the holder or apply any sideways force to it for at least 12 hours.

CAUTION

Double-sided tape should not be used to mount the Holder on vertical or highly

inclined surfaces. Use for mounting on horizontal surfaces only.

Clean these surfaces

for tape application.

Double-sided

tape

Masking

BSR idware GmbH

Jakob-Haringer-Str.3

A-5020 Salzburg

Web: www.bsr.at

Installation Using Screws

1. Use the template provided in Figure 2 to mark the surface for drilling. For reference, the front/top of

the holder is marked on both the template and on the holder itself.

2. Drill both holes using a 0.136” (#29) drill bit. Drill at least 5/8” deep if drilling into solid material.

3. Secure the holder to the surface using the provided screws, being careful to not overtighten them.

Figure 2. Drilling Template

CAUTION

Use the supplied screws only when mounting to sheet metal and/or wood.

Inhaltsverzeichnis

Andere Datalogic Zubehör Handbücher

Datalogic

Datalogic S45-T53 Series Bedienungsanleitung

Datalogic

Datalogic S5N-M Series Bedienungsanleitung

Datalogic

Datalogic S51-MA Series Bedienungsanleitung

Datalogic

Datalogic IO-Link S8 Bedienungsanleitung

Datalogic

Datalogic SG4-RB2-050-OO-W Bedienungsanleitung

Datalogic

Datalogic BC9180-STAR Bedienungsanleitung

Datalogic

Datalogic S8-PR M53 Series Bedienungsanleitung

Datalogic

Datalogic S51-PA Series Bedienungsanleitung

Datalogic

Datalogic IO-Link S100 Series Bedienungsanleitung

Datalogic

Datalogic S5N-PL Series Bedienungsanleitung

Datalogic

Datalogic VS-CRX Installations- und Betriebshandbuch

Datalogic

Datalogic TL46-WLF Bedienungsanleitung

Datalogic

Datalogic LD46 Bedienungsanleitung

Datalogic

Datalogic S100W Bedienungsanleitung

Datalogic

Datalogic S8-MR M Series Bedienungsanleitung

Datalogic

Datalogic S62 Series Bedienungsanleitung

Datalogic

Datalogic DataVS1 Bedienungsanleitung

Datalogic

Datalogic S5N-M Series Bedienungsanleitung

Datalogic

Datalogic DS2 Ethernet Bedienungsanleitung

Datalogic

Datalogic SRX3 Bedienungsanleitung

Datalogic

Datalogic S5N-PA W Series Bedienungsanleitung

Datalogic

Datalogic S8-PR T53 Series Bedienungsanleitung

Datalogic

Datalogic S80-MH-5-YL09 Bedienungsanleitung

Datalogic

Datalogic S5N-PA Bedienungsanleitung

Beliebte Zubehör Handbücher anderer Marken

Hillco

Hillco 2810 Bedienungsanleitung

Siemens

Siemens QSA2700D Bedienerhandbuch

Contours

Contours ZY024 Bedienungsanleitung

Saivod

Saivod VS621 Bedienungsanleitung

Virtuox

Virtuox VirtuCLEAN 2.0 Bedienungsanleitung

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Bedienungsanleitung

Z-Wave

Z-Wave HSD-200Z Bedienungsanleitung

turck

turck FMX-IM-2UPLI63FX Bedienungsanleitung

Decagon Devices

Decagon Devices 10HS Bedienungsanleitung

UPPAbaby

UPPAbaby Cup Holder Bedienungsanleitung

Elko

Elko SmartSensor Leakage Wireless Bedienungsanleitung

Grizzly

Grizzly H8371 Bedienungsanleitung

Panasonic

Panasonic HG-T Series Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 250 Series Referenzhandbuch

DigiDesign

DigiDesign 888/24 I/O Bedienungsanleitung

PROZIS

PROZIS QUAY Bedienungsanleitung

patagonia

patagonia PSI Vest Bedienungsanleitung

SFC Energy

SFC Energy EFOY GO! Bedienungsanleitung