Degelman Landroller LRX Series Bedienungsanleitung

LATCH & END WHEELS....Latch & End Wheel Cylinders

SWING ARM CIRCUIT..................Power-fold Cylinders

CTR WHEEL & FLOAT....Hitch & Center Wheel Cylinders

Connect Hydraulics

Opening into Field Position

143376 v1.1

(Refer to operators manual for complete safety and operation info.)

• Check for missing, worn or damaged parts.

• Working points & pins

• Hydraulic Connections & Hoses

• Hubs & Spindles

Maintenance

(Check Machine Daily)

QUICK-START GUIDE*

for LRX LANDROLLERS

* Refer to operators manual for complete safety and operation info.

WARRANTY

REMEMBER! You must complete Product

Registration to be eligible for Warranty.

7) Remove the Red

Transport Pin from the

ﬂoat hitch and secure

it in storage position.

8) Open the Hydraulic

Ball Valve.

9) Retract the Hitch Cylinder

to place the Landroller into Float Position.

6) Retract the Center Frame Cylinders to raise the center

frame wheels (lowering the center section to the ground).

10) The LRX Landroller should now be in the proper position

for ﬁeld use. Read manual for further information.

4) Extend the Power-fold Cylinders to fully open the

wings. Ensure the swing-arm shafts properly latch into

place.

5) IMPORTANT:

Retract the

POWER-FOLD

Cylinders

Remember to retract

the Power-fold

Cylinders back into

the fully closed position

before use.

1) Drive the LRX Landroller onto an area of level ground

large enough to open the wings. Ensure the Landroller is

positioned straight behind the tractor.

3) Activate the End Wheel

Cylinders to completely

raise the end wheels and

lower the ends of the

drums to the ground.

2) Remove the four Red Transport Bars from the End Wheel

& Center Wheel cylinders. Place the transport bars onto

the frame mounted storage brackets and secure with the

lock-pins.

Note: You may need to activate (extend) the

hydraulic cylinders slightly to allow easier

removal of the cylinder Transport Bars.

CMoving Into Transport Position

2) Fully extend the Front Hitch & Center Frame Cylinders.

This places the ﬂoat hitch

into Transport Position

and also fully lowers the

Center Frame Wheels

(raising the center section

off the ground).

3) IMPORTANT:

• Secure the Float Hitch

in place with the Red

Transport Pin.

• Close the Hydraulic Ball Valve.

4) Completely extend the End Wheel & Latch Cylinders to lower

the End Wheels and open the Swing-Arm Latches.

1) Drive the LRX Landroller onto an area of level ground with plenty

of room to drive straight forward.

6) Drive forward until roller wings trail straight behind tractor.

5) IMPORTANT: Ensure the POWER-FOLD

Cylinders are RETRACTED (closed)

Ensure that the Power-Fold Cylinders have been fully retracted

before moving forward. Failure to do so could damage the

Power-Fold cylinders and require replacement.

7) Install the four Red Transport Bars onto the End Wheel &

Center Wheel cylinder shafts and secure in place using the

lock-pins.

Ensure front Red Transport Pin has also been installed correctly

into the ﬂoat hitch (refer to step 3).

8) Read and follow necessary safety procedures outlined in

Transport Safety section of the manual.

Dieses Handbuch passt für folgende Modelle

Andere Degelman Landwirtschaftliche Geräte Handbücher

Degelman

Degelman Pro-till 26 Bedienungsanleitung

Degelman

Degelman STRAWMASTER Plus Bedienungsanleitung

Degelman

Degelman 9075 Programmierhandbuch

Degelman

Degelman PRO-TILL 14 Bedienungsanleitung

Degelman

Degelman PRO-TILL Series Bedienungsanleitung

Degelman

Degelman STRAWMASTER X Bedienungsanleitung

Degelman

Degelman LANDROLLER 45 Bedienungsanleitung

Degelman

Degelman M28 Programmierhandbuch

Degelman

Degelman STRAWMASTER+ 70 Programmierhandbuch

Degelman

Degelman STRAWMASTER 50 Programmierhandbuch

Degelman

Degelman STRAWMASTER 54NT Programmierhandbuch

Degelman

Degelman PRO-TILL 30 Bedienungsanleitung

Degelman

Degelman PRO-TILL 10/13 Bedienungsanleitung

Degelman

Degelman shuttlekart 1150 Programmierhandbuch

Degelman

Degelman Tri-Plex Landroller 7645 Bedienungsanleitung

Degelman

Degelman REV1500 Programmierhandbuch

Degelman

Degelman 5900 Series Bedienungsanleitung

Degelman

Degelman SILAGE KING Programmierhandbuch

Degelman

Degelman Pro-Till 33 Programmierhandbuch

Degelman

Degelman Pro-till 20 Bedienungsanleitung

Degelman

Degelman Tri-Plex Landroller 7634 Programmierhandbuch

Degelman

Degelman PRO-CAST 80 Bedienungsanleitung

Degelman

Degelman 5900 Series Bedienungsanleitung

Degelman

Degelman PRO-TILL 41 Bedienungsanleitung

Beliebte Landwirtschaftliche Geräte Handbücher anderer Marken

GSi

GSi PNEG-2314 Bedienungsanleitung

Checchi & Magli

Checchi & Magli TEXDRIVE Bedienungsanleitung

Amazone

Amazone Cenius 4003-2TX Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON MF 9313S Bedienungsanleitung

Cima

Cima BLITZ Bedienungs- und Wartungsanleitung

Amazone

Amazone CombiDisc 3000 Montageanleitung

HE-VA

HE-VA Disc-Roller XL Contour Bedienungsanleitung

AGT

AGT AGT-SSFM Bedienungsanleitung

Milestone

Milestone 72-84 Bedienungsanleitung

KUHN

KUHN Hector 3000 Bedienungsanleitung

Krone

Krone X-Disc 6200 Bedienungsanleitung

Eliet

Eliet DZC450 Bedienungsanleitung

Taarup

Taarup BIO+ B4000 Bedienungsanleitung

Garland

Garland SHAKER 310 DPG Bedienungsanleitung

stable comfort

stable comfort StableWall System Bedienungsanleitung

Raven

Raven AccuBoom Bedienungsanleitung

International

International 710 Bedienungsanleitung

Ashland

Ashland HDW-3217-14 Bedienungsanleitung