Dell Force10 C150 Bedienungsanleitung

Dell Force10

C150 and C300 Systems

Quick Start Guide

Regulatory Model: C150/C300

Dell Force10

C150 and C300 Systems

Quick Start Guide

Regulatory Model: C150/C300

Notes, Cautions, and Warnings

NOTE: A NOTE indicates important information that helps you make better use

of your computer.

CAUTION: A CAUTION indicates potential damage to hardware or loss of

data if instructions are not followed.

WARNING: A WARNING indicates a potential for property damage,

personal injury, or death.

If you purchased a Dell n Series computer, any references in this publication to

Microsoft

Windows operating systems are not applicable.

____________________

Information in this publication is subject to change without notice.

Reproduction of these materials in anymanner whatsoever without the written permissionof Dell Inc.

is strictly forbidden.

Trademarks used in this text: Dell™, the DELL logo, Dell Precision™, OptiPlex™, Latitude™,

PowerEdge™, PowerVault™, PowerConnect™, OpenManage™, EqualLogic™, KACE™,

FlexAddress™ and Vostro™ are trademarks of Dell Inc. Intel

, Pentium

, Xeon

, Core™ and

Celeron

are registered trademarks of Intel Corporation in the U.S. and other countries. AMD

is a

registered trademark and AMD Opteron™, AMD Phenom™, and AMD Sempron™ are trademarks

of Advanced Micro Devices, Inc. Microsoft®, Windows®, Windows Server®, MS-DOS®and

WindowsVista®areeithertrademarksorregisteredtrademarksofMicrosoftCorporationintheUnited

States and/or other countries. Red Hat Enterprise Linux®and Enterprise Linux®are registered

trademarks of Red Hat, Inc. in the United States and/or other countries. Novell®is a registered

trademarkand SUSE ™ is atrademarkof NovellInc. in theUnited Statesandothercountries.Oracle®

is a registered trademark of Oracle Corporation and/or its affiliates. Citrix®, Xen®, XenServer®and

XenMotion®areeitherregisteredtrademarksortrademarksofCitrixSystems,Inc.intheUnitedStates

and/or other countries. VMware®, Virtual SMP®, vMotion®, vCenter®, and vSphere®are registered

trademarks or trademarks of VMWare, Inc. in the United States or other countries.

Othertrademarksandtradenamesmaybeusedinthispublicationtorefertoeithertheentitiesclaiming

the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and

trade names other than its own.

Regulatory Model: C150/C300

2011 - 9 P/N 0JVTD9 Rev. A00

About this Guide 3

About this Guide

This document is intended as a Quick Start Guide to get new systems up and

running and ready for configuration. For complete installation and configuration

information, refer to the following documents:

Documentation C150 C300

Hardware installation and

power-up instructions Installing and Maintaining

the C150 System Installing and Maintaining

the C300 System

Software configuration FTOS Configuration

Guide FTOS Configuration

Guide

Command line interface FTOS Command Line

Reference Guide FTOS Command Line

Reference Guide

Latest updates FTOS Release Notes for C-

Series FTOS Release Notes for C-

Series

4About this Guide

Installing the Hardware 5

Installing the Hardware

This guide assumes all site preparation has been performed before installing the

chassis.

Installing the Chassis

To install the C150/300 chassis, Dell Force10 recommends that you complete

the installation procedures in the order presented below.

NOTE: Unless stated otherwise, the installation instructions below apply to both

the C150 and C300 chassis.

Always handle the system and its components with care. Avoid dropping the

switch or its field replaceable units.

CAUTION: Always wear an ESD-preventive wrist or heel ground strap when

handling the chassis and its components. As with all electrical devices of this

type, take all necessary safety precautions to prevent injury when installing

this system. Electrostatic discharge (ESD) damage can occur if components

are mishandled.

Installing the Chassis in a Two-Post Rack

WARNING: Use an equipment lift or pallet jack when lifting or moving the

chassis. Install the chassis into the rack before inserting chassis components.

Lift the C150/300 chassis only from the bottom. Lifting by the chassis shelves

or power supply openings might damage the chassis.

WARNING: To prevent bodily injury when mounting or servicing this unit in

a rack, you must take special precautions to ensure that the system remains

stable. The following guidelines are provided to ensure your safety:

• This unit should be mounted at the bottom of the rack if it is the only unit

in the rack.

• When mounting this unit in a partially filled rack, load the rack from the

bottom to the top with the heaviest component at the bottom of the rack.

• If the rack is provided with stabilizing devices, install the stabilizers

before mounting or servicing the unit in the rack.

Follow these steps to install the chassis into a 19-inch equipment rack:

6Installing the Hardware

Step Task

1Determine the chassis mounting location in the equipment rack.

2Orient the bar with the arrows pointing upward. The smooth side of the

bar should face outward.

3Attach the bar to the equipment rack brackets using the mounting screws

provided by the rack manufacturer.

4Use an equipment lift to align the chassis rack-mount holes with the

equipment rack holes, and situate the chassis on top of the equipment

rack bar.

Installing the Hardware 7

5Insert screws (provided with your rack) through the chassis rack-

mounting bracket and into the equipment rack, and tighten them.

Rack Mounting the C150 Chassis

Rack Mounting the C300 Chassis

Step Task

fnD0002mp

8Installing the Hardware

Attach a Ground Cable to the C150/300 DC

Chassis

WARNING: You must complete the ground connection before proceeding

with any DC PEM connection.

The AC power cord is the primary ground connection for C-Series AC chassis.

This procedure applies to the DC powered chassis only.

You must provide your own cables to connect to a remote power source (a

circuit breaker panel, for example) in your equipment rack or facility. Cables

must be sized to meet the following criteria:

• Rated for 60A service to allow for a fully loaded C150 system per NEC in the

United States or internationally, per local safety codes.

• Limit voltage drop across the cable length to 0.5V or less.

NOTE: Apply a coat of anti-oxidant paste to unplated metal contact

surfaces before you make the cable connections. File unplated connectors,

braided straps, and bus bars to a shiny finish. It is not necessary to file and

coat tinned, solder plated, or silver-plated connectors or other plated

connection surfaces, such as those on the PEM studs.

Step Task

1Locate the chassis ground connector stud on the PEM front panel. It is

the single stud below the safety cover.

2Remove the nut and washer from the ground stud.

3Apply a coat of anti-oxidant paste to the connector stud, if required.

4Install the grounding cable. This cable is typically green or green and

yellow.

NOTE: Termination points require UL-listed 1-hole lug with a

1/4-inch hole.

5Replace the washer and nut on the stud.

6Secure the nut with a nut driver or torque wrench (not to exceed 4

ft/lbs).

7Connect the opposite end of the grounding cable to the appropriate

nearest grounding.

Andere Handbücher für Force10 C150

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Dell Server Handbücher

Dell

Dell E71S Bedienungsanleitung

Dell

Dell S5000 Series Bedienungsanleitung

Dell

Dell Wyse 7030 Bedienungsanleitung

Dell

Dell PowerEdge R320 Bedienungsanleitung

Dell

Dell EMC PowerEdge XE8545 Handbuch

Dell

Dell PowerVault NX1950 Bedienungsanleitung

Dell

Dell PowerEdge 1750 Technisches Handbuch

Dell

Dell PowerEdge C6320 Bedienungsanleitung

Dell

Dell PowerEdge 2410 Bedienungsanleitung

Dell

Dell PowerEdge T605 Bedienungsanleitung

Dell

Dell PowerEdge 2970 Technisches Handbuch

Dell

Dell PowerEdge C6600 Handbuch

Dell

Dell PowerEdge C1100 Kurzanleitung

Dell

Dell POWEREDGE R515 Kurzanleitung

Dell

Dell PowerEdge 2950 Bedienungsanleitung

Dell

Dell EMC PowerEdge R750xs Handbuch

Dell

Dell DL4300 Bedienungsanleitung

Dell

Dell EMC XC Core XC450 Handbuch

Dell

Dell PowerEdge C6145 Bedienungsanleitung

Dell

Dell PowerEdge 2650 Bedienungsanleitung

Dell

Dell PowerEdge R300 Bedienungsanleitung

Dell

Dell Force10 S25-01-GE-24P Bedienungsanleitung

Dell

Dell PowerEdge 800 Technisches Handbuch

Dell

Dell PowerEdge C4130 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung

Planet

Planet NAS-7410 Bedienungsanleitung

Lenovo

Lenovo ThinkSystem SR635 V3 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX900 Bedienungsanleitung

Asus

Asus RS700DA-E6 PS4 Bedienungsanleitung

Vertiv

Vertiv Avocent ACS6000 Montage- und Wartungsanleitung

A & T Internationale

A & T Internationale Xserve Service-Handbuch