Dell Force10 S2410-01-10GE-24P Bedienungsanleitung

Installing the S2410 System

Notes, Cautions, and Warnings

NOTE: A NOTE indicates important information that helps you make better use of your computer.

CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not

followed.

WARNING: A WARNING indicates a potential for property damage, personal injury, or death.

Information in this publication is subject to change without notice.

Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.

Trademarks used in this text: Dell™, the DELL logo, Dell Precision™, OptiPlex™, Latitude™, PowerEdge™, PowerVault™,

PowerConnect™, OpenManage™, EqualLogic™, KACE™, FlexAddress™ and Vostro™ are trademarks of Dell Inc. Intel®, Pentium®,

Xeon®, Core™ and Celeron®are registered trademarks of Intel Corporation in the U.S. and other countries. AMD®is a registered trademark

and AMD Opteron™, AMD Phenom™, and AMD Sempron™ are trademarks of Advanced Micro Devices, Inc. Microsoft®, Windows®,

Windows Server®, MS-DOS®and Windows Vista®are either trademarks or registered trademarks of Microsoft Corporation in the United

Statesand/orothercountries.RedHatEnterpriseLinux®andEnterpriseLinux®areregisteredtrademarksofRedHat,Inc.intheUnitedStates

and/or other countries. Novell®is a registered trademark and SUSE ™ is a trademark of Novell Inc. in the United States and other countries.

Oracle®isaregisteredtrademarkofOracleCorporation and/or its affiliates.Citrix®, Xen®, XenServer®and XenMotion®areeither registered

trademarks or trademarks of Citrix Systems, Inc. in the United States and/or other countries. VMware®, Virtual SMP®, vMotion®, vCenter®,

and vSphere®are registered trademarks or trademarks of VMWare, Inc. in the United States or other countries.

Other trademarks and trade names may be used in this publication to refer to either the entities claiming the marks and names or their products.

Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.

November 2011 P/N —

Contents | 3

Contents

1 About this Guide

Information Symbols and Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Related Publications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

2 The S2410 System

Physical Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Required Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

System Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

LED Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

3 Site Preparation

Site Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Cabinet Placement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Rack Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Fans and Airflow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Storing Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Tools Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

4 Installing the S2410

Tabletop Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Rack or Cabinet Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Attaching the Rack Ears . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Two-Post Rack Mounting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Four-Post Rack-mounting with Threaded Rails. . . . . . . . . . . . . . . . . . . . . . . . . 17

Four-Post Rack-mounting with Cage Nuts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Supplying Power. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Where Do I Go from Here?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

5 Accessing Ports

Accessing the Console Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Accessing the Ethernet Management Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Accessing CX4 Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Required CX4 Cable Housing Clearances. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Accessing XFP Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

6 S2410 Specifications

4| Contents

www.dell.com | support.dell.com

Chassis Physical Design. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Environmental Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Agency Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Safety Standards and Compliance Agency Certifications . . . . . . . . . . . . . . . . . 29

Electromagnetic Compatibility (EMC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Product Recycling and Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

7 Technical Support

The iSupport Website . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Accessing iSupport Services. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Contacting the Technical Assistance Center . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Locating Serial Numbers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Requesting a Hardware Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

8 Index

About this Guide | 5

About this Guide

This guide provides site preparation recommendations, step-by-step procedures for rack mounting and

desk mounting, inserting optional modules, and connecting to a power source, for the S2410 system,

including the S2410CP and S2410P.

After you have completed the hardware installation and power-up of the S2410, refer to the SFTOS™

Configuration Guide for the S2410 for software configuration information and the SFTOS Command

Reference, Version 2.4 for detailed Command Line Interface (CLI) information.

NOTE: S2410 switches contain no user-serviceable parts. For details on recycling the switch or any of its

components, see

Product Recycling and Disposal on page 30

Information Symbols and Warnings

The following graphic symbols are used in this document to bring attention to hazards that exist when

handling the S2410 and its components. Please read these alerts and heed their warnings and cautions.

Table 1-1

describes symbols contained in this guide.

WARNING: The installation of this equipment shall be performed by trained and qualified personnel only.

Read this guide before installing and powering up this equipment. This equipment contains two power cords.

Disconnect both power cords before servicing.

WARNING: This equipment contains optical transceivers, which comply with the limits of Class 1 laser

radiation.

WARNING: Visible and invisible laser radiation may be emitted from the aperture of the optical transceiver

ports when no cable is connected. Avoid exposure to laser radiation and do not stare into open apertures.

CAUTION: Wear grounding wrist straps when handling this equipment to avoid ESD damage.

Table 1-1. Information Symbols

Symbol Warning Description

Note This symbol informs you of important operational information.

Caution This symbol informs you that improper handling and installation could result in equipment

damage or loss of data.

Warning This symbol signals information about hardware handling that could result in injury.

6| About this Guide

www.dell.com | support.dell.com

Related Publications

For more information about the S2410, refer to the following documents:

•SFTOS Configuration Guide, Version 2.4.1

•SFTOS Command Reference, Version 2.4.1

• S2410 Quick Reference

•S-Series and SFTOS Version 2.4.1 Release Notes

Each of these documents are available on the S2410 Documentation CD-ROM and on the iSupport

website (registration for access to some sections is required):

http://www.force10networks.com/csportal20/

KnowledgeBase/Documentation.aspx

The iSupport website also has a section for S-Series techtips and FAQs. See

The iSupport Website on

page 33

The CD-ROM also has:

•MIBs: Files for all SNMP MIBs supported by SFTOS

• Data sheets: Force10 product data sheets

•Security: Description and supporting files for setting up SSH, SSL, and HTTPS access to the switch

•Training: PDF files of the slide shows used in training

The S2410 System | 7

The S2410 System

This chapter contains these sections:

•Physical Interfaces

•Required Equipment on page 7

•Features on page 8

•Ports on page 8

•System Status on page 9

Physical Interfaces

The Dell Force10 S2410 is a Layer 2 switch that is available in two models — the S2410CP and the

S2410P. The primary difference is that the S2410P contains 24 built-in 10-gigabit Ethernet (10G) XFP

ports, while the S2410CP contains 20 built-in 10G BaseCX4 ports and four 10G XFP ports.

Figure 2-1. The S2410CP (Front View)

Figure 2-2. The S2410 (Rear View

)

Required Equipment

The following items are necessary to install the S2410 system:

• Two grounded AC power sources

10/100 Ethernet Management Port

Status LEDs

Console Port

20 XFP Ports (S2410P)

20 CX4 Ports (S2410CP) or

4 XFP Ports

Label

(Assembly and Serial #)

070-00285-00-1

10/100 Ethernet Management Port

Status LEDs

Console Port

20 XFP Ports (S2410P)

20 CX4 Ports (S2410CP) or

4 XFP Ports

Label

(Assembly and Serial #)

070-00285-00-1

S2410-01-10GE-24CP

10/100

Console

Ethernet

Alarm

PSU-A

PSU-B

CLASS 1 LASER PRODUCT

LASERPRODUKT DER KLASSE1

Catalog #

System

Serial #

Assy

fn00158s241

Dual AC Power Receptacles

Vents

8| The S2410 System

www.dell.com | support.dell.com

• At least one cable (included) to connect the power source to the S2410 AC power supply

• Brackets and screws (included) for front-mounted rack installation (#2 Phillips screwdriver required but

not included)

• Console port: Rollover cable (RJ-45 connector) and terminal adapter (DB-9 to RJ-45) (supplied) (For

pinout and terminal settings, see Accessing the Console Port on page 23.)

Features

• 24 line-rate 10 GbE ports (See Ports for details.)

• CPU and switch processor

• Flash memory

• Standard 1U chassis height by 19-inch rack-mountable width

• Several rack attachment options; front-mount brackets standard

• Seven built-in fans on the left side (see Fans and Airflow on page 12)

• Load-sharing redundant internal AC power supplies

• Up to 16000 MAC address entries supported with hardware assisted aging

• Supports 9000 jumbo frames

• Back-pressure support at half-duplex, IEEE 802.3x flow control at full duplex

• Extensive LEDs for per-port and system statuses (see LED Displays on page 9)

Ports

S2410CP:

• 20 fixed 10GbE BaseCX4 ports

• 4 ports for optional 10G XFP transceivers (needs XFP optics)

• 1 RJ-45 console port with RS-232 signaling

• 1 RJ-45 10/100 dedicated Ethernet Management port (labeled 10/100 Ethernet)

S2410P:

• 24 fixed 10GbE XFP ports (needs XFP optics)

• 1 RJ-45 console port with RS-232 signaling

• 1 RJ-45 dedicated Ethernet Management port (labeled 10/100 Ethernet)

For details on using ports (console, CX4, Ethernet Management, and XFP), see

Chapter , Accessing Ports,

on page 23

The S2410 System | 9

System Status

S2410 status data can be derived in several ways, including physical LED displays, discussed next, along

with boot menu options, CLI show commands, SNMP traps, and the SFTOS Web User Interface. For

details on those options, see the S2410 Quick Reference, the SFTOS Command Reference (SFTOS 2.4),

and the SFTOS Configuration Guide (SFTOS 2.4).

LED Displays

As shown in

Figure 2-1 on page 7

, the S2410 contains a set of system status indicators on the right side of

the front panel. Those indicators are explained in

Table 2-1

. Also, each port has status indicators, which

are described in

Table 2-2 on page 9

The following table describes the LED status indicators on the left side of the front panel.

Table 2-1. Status Panel LED Display

LED Label LED Color Description

System Off

Green Blinking

Green

Red

Unit is powered off.

Unit is booting up (blinking rate is 1 Hz).

Unit is operational

Error during boot

Alarm Off

Amber

Red

No alarm

Minor alarm: Fan or temperature is outside acceptable range

Major alarm

PSU A

and

PSU B

Off

Green

Red

PSU not present

PSU present and OK

Red could mean that the PSU is present but failed, or that one power cord that used to

be connected is now disconnected.

The syslog message indicates “AC Power removed or fault detected.”

Table 2-2. Port LED Displays

Feature Description

10G Ports Link LED (upper left side of each port except 1 and 2):

Green — Link up on this port

Off — No Link detected at this port

Activity LED (lower left side of each port except 1 and 2)

Blinking Green — Activity, transmitting or receiving packet at this port.

Off — No activity

Ethernet Management Port

(labeled 10/100 Ethernet)

(commonly called the service

port)

Link LED (lower left side of port):

Green — 100BaseT Link up on this port (1000 is not guaranteed.)

Off — No Link detected at this port

Activity LED (lower right side of port)

Blinking Green — Activity, transmitting or receiving packet at this port.

Off — No activity

10 | The S2410 System

www.dell.com | support.dell.com

Andere Handbücher für Force10 S2410-01-10GE-24P

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Dell Server Handbücher

Dell

Dell PowerEdge C8000 Bedienungsanleitung

Dell

Dell PowerEdge C6105 Bedienungsanleitung

Dell

Dell P72S Bedienungsanleitung

Dell

Dell PowerEdge T110 II Bedienungsanleitung

Dell

Dell PowerEdge T110 Bedienungsanleitung

Dell

Dell External OEMR R410 Kurzanleitung

Dell

Dell EMC VxFlex Ready Node Bedienungsanleitung

Dell

Dell DR4000 Restore Manager Service-Handbuch

Dell

Dell PowerEdge 1655MC Bedienungsanleitung

Dell

Dell PowerEdge Cluster FE100 Bedienungsanleitung

Dell

Dell PowerEdge NX182 Bedienungsanleitung

Dell

Dell Poweredge metered Bedienungsanleitung

Dell

Dell PowerEdge C8000 Datenblatt

Dell

Dell PowerEdge 1550 Bedienungsanleitung

Dell

Dell PowerEdge 6850 Bedienungsanleitung

Dell

Dell POWER EDGE SC1430 Bedienungsanleitung

Dell

Dell PowerEdge T130 Bedienungsanleitung

Dell

Dell PowerEdge T710 Technisches Handbuch

Dell

Dell PowerEdge M820 Systems Bedienungsanleitung

Dell

Dell EMC PowerEdge T340 Handbuch

Dell

Dell PowerEdge 2950 Bedienungsanleitung

Dell

Dell Precision Workstation 350 Technisches Handbuch

Dell

Dell PowerEdge C5220 Kurzanleitung

Dell

Dell PowerEdge R7615 Handbuch

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung

Planet

Planet NAS-7410 Bedienungsanleitung

Lenovo

Lenovo ThinkSystem SR635 V3 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX900 Bedienungsanleitung

Asus

Asus RS700DA-E6 PS4 Bedienungsanleitung

Vertiv

Vertiv Avocent ACS6000 Montage- und Wartungsanleitung

A & T Internationale

A & T Internationale Xserve Service-Handbuch